Replace github OTA update over MQTT with settings in user_config.

Author: h2zero

main/Ota_github.h

@@ -74,33 +74,11 @@ const byte subnet[] = {255, 255, 255, 0};
 
 #if defined(ESP8266) || defined(ESP32) // for nodemcu, weemos and esp8266
 //#  define ESPWifiManualSetup true //uncomment you don't want to use wifimanager for your credential settings on ESP
-//#  define MQTT_HTTPS_FW_UPDATE //uncomment to enable updating via mqtt message.
 #else // for arduino boards
 const byte ip[] = {192, 168, 1, 99};
 const byte mac[] = {0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95}; //W5100 ethernet shield mac adress
 #endif
 
-#ifndef NTP_SERVER
-#  define NTP_SERVER "pool.ntp.org"
-#endif
-
-#ifdef MQTT_HTTPS_FW_UPDATE
-#  if defined(ESP8266) || defined(ESP32)
-//If used, this should be set to the root CA certificate of the server hosting the firmware.
-// The certificate must be in PEM ascii format
-const char* https_fw_server_cert PROGMEM = R"EOF("
------BEGIN CERTIFICATE-----
-...
------END CERTIFICATE-----
-")EOF";
-#    ifndef MQTT_HTTPS_FW_UPDATE_USE_PASSWORD
-#      define MQTT_HTTPS_FW_UPDATE_USE_PASSWORD 1 // Set this to 0 if not using TLS connection to MQTT broker to prevent clear text passwords being sent.
-#    endif
-#  else
-#    error "only ESP8266 and ESP32 support MQTT_HTTPS_FW_UPDATE"
-#  endif
-#endif
-
 //#define ESP32_ETHERNET=true // Uncomment to use Ethernet module on OLIMEX ESP32 Ethernet gateway
 
 #if defined(ESPWifiManualSetup) // for nodemcu, weemos and esp8266
@@ -157,9 +135,6 @@ const char* https_fw_server_cert PROGMEM = R"EOF("
 #ifndef MQTT_PORT
 #  define MQTT_PORT "1883"
 #endif
-#ifndef MQTT_SECURE_DEFAULT
-#  define MQTT_SECURE_DEFAULT false
-#endif
 
 #if defined(ESP8266) || defined(ESP32)
 // The root ca certificate used for validating the MQTT broker
@@ -172,6 +147,51 @@ const char* certificate PROGMEM = R"EOF("
 
 #  define ATTEMPTS_BEFORE_BG 10 // Number of wifi connection attempts before going to BG protocol
 #  define ATTEMPTS_BEFORE_B  20 // Number of wifi connection attempts before going to B protocol
+
+#  ifndef NTP_SERVER
+#    define NTP_SERVER "pool.ntp.org"
+#  endif
+
+#  ifndef MQTT_SECURE_DEFAULT
+#    define MQTT_SECURE_DEFAULT false
+#  endif
+
+//#  define MQTT_HTTPS_FW_UPDATE //uncomment to enable updating via mqtt message.
+
+#  ifdef MQTT_HTTPS_FW_UPDATE
+// If used, this should be set to the root CA certificate of the server hosting the firmware.
+// The certificate must be in PEM ascii format.
+// The default certificate is for github.
+const char* OTAserver_cert PROGMEM = R"EOF("
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+")EOF";
+
+#    ifndef MQTT_HTTPS_FW_UPDATE_USE_PASSWORD
+#      define MQTT_HTTPS_FW_UPDATE_USE_PASSWORD 1 // Set this to 0 if not using TLS connection to MQTT broker to prevent clear text passwords being sent.
+#    endif
+#  endif
 #endif
 
 /*------------------DEEP SLEEP parameters ------------------*/

main/User_config.h

@@ -174,8 +174,10 @@ bool disc = true; // Auto discovery with Home Assistant convention
 #endif
 unsigned long timer_led_measures = 0;
 static void* eClient = nullptr;
+#if defined(ESP8266) || defined(ESP32)
 static bool mqtt_secure = MQTT_SECURE_DEFAULT;
 static String mqtt_cert = "";
+#endif
 
 #ifdef ESP32
 #  include <ArduinoOTA.h>
@@ -1660,10 +1662,6 @@ void receivingMQTT(char* topicOri, char* datacallback) {
 }
 
 #ifdef MQTT_HTTPS_FW_UPDATE
-#  include <WiFiClientSecure.h>
-
-#  include "Ota_github.h"
-
 #  ifdef ESP32
 #    include "zzHTTPUpdate.h"
 #  elif ESP8266
@@ -1739,22 +1737,12 @@ void MQTTHttpsFWUpdate(char* topicOri, JsonObject& HttpsFwUpdateData) {
         }
 
 #  ifdef ESP32
-        if (strstr(url, "github") != 0) {
-          update_client.setCACert(_github_cert);
-        } else {
-          update_client.setCACert(https_fw_server_cert);
-        }
-
+        update_client.setCACert(OTAserver_cert);
         update_client.setTimeout(12);
         httpUpdate.setFollowRedirects(HTTPC_STRICT_FOLLOW_REDIRECTS);
         result = httpUpdate.update(update_client, url);
 #  elif ESP8266
-        if (strstr(url, "github") != 0) {
-          caCert.append(_github_cert);
-        } else {
-          caCert.append(https_fw_server_cert);
-        }
-
+        caCert.append(OTAserver_cert);
         update_client.setTrustAnchors(&caCert);
         update_client.setTimeout(12000);
         ESPhttpUpdate.setFollowRedirects(HTTPC_STRICT_FOLLOW_REDIRECTS);
@@ -1852,4 +1840,4 @@ String toString(uint32_t input) {
   return result;
 }
 #  endif
-#endif
+#endif