Update the_pill README files

- Update the_pill/README.md: accurate production/dev statuses,
  expand MODBUS subtree with per-device links
- Remove dev warning from UART/README.md (script is production)
- Add wb_m1w2_v3_vc.shelly.js and VC mapping table to WB-M1W2-v3 README
- Add wb_mir_v3_reconfig.shelly.js to WB-MIR-v-3 README; mark IR
  utility as under development

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

Author: Orlin Dimitrov

CHANGELOG.md

@@ -3,6 +3,10 @@
 All notable changes to this project will be documented in this file.
 
 ## 2026-03
+- Update `the_pill/README.md` to reflect accurate production/under-development statuses, expand MODBUS subtree with per-device links, and correct YS-IRTM and UART entries to production
+- Remove "Under Development" warning from `the_pill/UART/README.md` — script is production
+- Add missing `wb_m1w2_v3_vc.shelly.js` to Files and Virtual Component mapping table in `the_pill/MODBUS/wirenboard/WB-M1W2-v3/README.md`
+- Add missing `wb_mir_v3_reconfig.shelly.js` to Files in `the_pill/MODBUS/wirenboard/WB-MIR-v-3/README.md`; mark `wb_mir_v3_ir.shelly.js` as under development
 - Promote `http-integrations/finance-yahoo/stock-monitor_vc.shelly.js` to production: rename from `stock-monitor.shelly.js`, fix mJS compatibility (`Number.isFinite` → `isFinite`, `padStart` → `pad2` helper), add screenshot to README
 - Add `the_pill/MODBUS/wirenboard/WB-MIR-v-3/wb_mir_v3_ir.shelly.js`, a dedicated under-development IR utility for WB-MIR v3 learn/play/dump/erase operations
 - Promote all `the_pill/MODBUS/wirenboard/WB-MIR-v-3/*.shelly.js` scripts to production and add them to `examples-manifest.json`

the_pill/MODBUS/wirenboard/WB-M1W2-v3/README.md

@@ -12,8 +12,23 @@ You have a WB-M1W2 v3 on the RS485 bus and want to read DS18B20 temperatures fro
 
 ## Files
 - [`wb_m1w2_v3.shelly.js`](wb_m1w2_v3.shelly.js): console reader (logs to print output)
+- [`wb_m1w2_v3_vc.shelly.js`](wb_m1w2_v3_vc.shelly.js): reader + Virtual Components
 - [`../../utils/modbus_scan.shelly.js`](../../utils/modbus_scan.shelly.js): universal MODBUS scanner — discovers any device by sweeping baud rates, modes, and slave IDs
 
+## Virtual Component Mapping (`wb_m1w2_v3_vc.shelly.js`)
+| Virtual Component | Name | Unit |
+|---|---|---|
+| `number:200` | Ch1 Temperature | degC |
+| `number:201` | Ch2 Temperature | degC |
+| `number:202` | Supply Voltage | V |
+| `number:203` | Counter Ch1 | — |
+| `number:204` | Counter Ch2 | — |
+| `boolean:200` | Input #1 State | 0=open, 1=closed |
+| `boolean:201` | Input #2 State | 0=open, 1=closed |
+| `boolean:202` | Sensor #1 Status | 0=absent, 1=valid |
+| `boolean:203` | Sensor #2 Status | 0=absent, 1=valid |
+| `group:200` | WB-M1W2 v3 | group |
+
 ## Screenshot
 This screenshot shows the WB-M1W2 v3 telemetry page with both 1-Wire channels, supply voltage, counters, and input status in the Shelly UI.
 

the_pill/MODBUS/wirenboard/WB-MIR-v-3/README.md

@@ -13,7 +13,8 @@ You have a WB-MIR v3 on the RS485 bus and want to read DS18B20 temperature, moni
 ## Files
 - [`wb_mir_v3.shelly.js`](wb_mir_v3.shelly.js): console reader (logs to print output)
 - [`wb_mir_v3_vc.shelly.js`](wb_mir_v3_vc.shelly.js): reader + Virtual Components
-- [`wb_mir_v3_ir.shelly.js`](wb_mir_v3_ir.shelly.js): dedicated IR utility for learning, playback, ROM dump, and erase operations
+- [`wb_mir_v3_reconfig.shelly.js`](wb_mir_v3_reconfig.shelly.js): one-shot utility to change baud rate and slave ID over MODBUS (run once, then disable)
+- [`wb_mir_v3_ir.shelly.js`](wb_mir_v3_ir.shelly.js): dedicated IR utility for learning, playback, ROM dump, and erase operations — *under development*
 
 ## Screenshot
 This screenshot shows the WB-MIR v3 telemetry page with 1-Wire temperature, supply voltage, MCU temperature, and IR / 1-Wire module status in the Shelly UI.

the_pill/README.md

@@ -5,11 +5,21 @@ its own README with wiring, setup, and usage details.
 
 ## Contents
 
-- iRobot Roomba (Open Interface control) — *under development*
-- MODBUS-RTU master + MB308V example — *under development*
-- MFRC522 RFID reader (UART) — *under development*
-- SDS011 air quality sensor (PM2.5/PM10) — *under development*
-- SDS018 air quality sensor (PM2.5/PM10) — *under development*
-- YS-IRTM infrared module (send/receive NEC codes) — *under development*
-- UART test (loopback/wiring verification) — *under development*
-- _backup (deprecated/experimental scripts)
+- **[UART/](UART/)** — loopback/wiring verification test — *production*
+- **[ys_irtm/](ys_irtm/)** — YS-IRTM infrared module (send/receive NEC codes) — *production*
+- **[MODBUS/](MODBUS/)** — MODBUS-RTU master scripts and per-device examples
+  - [Deye/](MODBUS/Deye/) — Deye SG02LP1 inverter reader + Virtual Components — *production*
+  - [Davis/](MODBUS/Davis/) — Davis pyranometer reader + Virtual Components — *production*
+  - [LinkedGo/ST802/](MODBUS/LinkedGo/ST802/) — LinkedGo ST802 BMS thermostat client + VC — *production*
+  - [JKESS/JK200-MBS/](MODBUS/JKESS/JK200-MBS/) — JKESS JK200-MBS BMS reader + Virtual Components — *production*
+  - [wirenboard/WB-M1W2-v3/](MODBUS/wirenboard/WB-M1W2-v3/) — Wirenboard WB-M1W2 v3 reader + VC — *production*
+  - [wirenboard/WB-MIR-v-3/](MODBUS/wirenboard/WB-MIR-v-3/) — Wirenboard WB-MIR v3 IR module + VC — *production*
+  - [utils/](MODBUS/utils/) — universal MODBUS-RTU scanner — *production*
+  - [ComWinTop/](MODBUS/ComWinTop/) — CWT-MB308V IO module + Virtual Components — *under development*
+  - [LinkedGo/R290/](MODBUS/LinkedGo/R290/) — LinkedGo R290 air-to-water heat pump — *under development*
+  - [HTTP-Bridge/](MODBUS/HTTP-Bridge/) — MODBUS-RTU HTTP bridge — *under development*
+- **[iRobotRoomba/](iRobotRoomba/)** — iRobot Roomba Open Interface control — *under development*
+- **[RFID-RC522/](RFID-RC522/)** — MFRC522 RFID reader (UART) — *under development*
+- **[SDS011/](SDS011/)** — SDS011 air quality sensor (PM2.5/PM10) — *under development*
+- **[SDS018/](SDS018/)** — SDS018 air quality sensor (PM2.5/PM10) — *under development*
+- **[_backup/](_backup/)** — deprecated/experimental scripts

the_pill/UART/README.md

@@ -1,7 +1,5 @@
 # UART Test
 
-> **Under Development** - This example is currently under development and may not be fully functional.
-
 Simple UART loopback test for verifying wiring and communication with The Pill.
 
 ## Hardware Requirements