SDSIO-Server (on MS Windows) has performace issues with VCOM

[MiloradCvjetkovic]

If recording is done at a rate of 5 MB/s (on STM32H743 running at 400 MHz with USB HS) there are occasionally gaps between USB transactions for more than 50 ms which causes embedded application to fill in the buffer preventing further writes to the buffer.

SDSIO-Server should provide timely USB transfers to allow sustainable recording.

Screenshot below shows this gap between 2 USB IN transactions:

[DavidLesnjak]

I've done an initial investigation and based on our findings, it appears that the root cause is not within the SDSIO-Server itself, but rather related to how USB Virtual COM ports are handled on the Windows side.

To isolate the problem, I ran a test setup without the SDS framework or SDSIO-Server:
On the device (STM32H743), I used the USB Device CDC stack, calling USBD_CDC_ACM_WriteData() in a loop to continuously transmit data. On the Windows PC, I used Tera Term to log the incoming data to a file.

Using a USB analyzer, I observed similar gaps between IN transactions (over 50 ms) as reported in this issue. This confirms that the issue likely originates from the Windows CDC driver or how Windows buffers and handles USB VCOM communication.