Errors while installing(successfully installed) #834

noamtu123 · 2025-04-09T15:45:52Z

noamtu123
Apr 9, 2025

pc info: dell inspiron 14 5459 (intel i5-6200u, amd radeon r5 335 2gb ddr3 vram, 8gb ddr3l ram walram 256gb sata ssd from aliexpress)
Linux distro: Zorin OS 17.3 lite
that was my install process in terminal:

noamtu123@noamtu123-Inspiron-5459:~$ sudo apt update
[sudo] password for noamtu123:      
Hit:1 http://security.ubuntu.com/ubuntu jammy-security InRelease
Hit:2 http://il.archive.ubuntu.com/ubuntu jammy InRelease                      
Hit:3 https://ppa.launchpadcontent.net/zorinos/apps/ubuntu jammy InRelease     
Hit:4 https://ppa.launchpadcontent.net/zorinos/drivers/ubuntu jammy InRelease  
Hit:5 http://il.archive.ubuntu.com/ubuntu jammy-updates InRelease              
Hit:6 https://ppa.launchpadcontent.net/zorinos/patches/ubuntu jammy InRelease  
Hit:7 https://ppa.launchpadcontent.net/zorinos/stable/ubuntu jammy InRelease
Hit:8 http://il.archive.ubuntu.com/ubuntu jammy-backports InRelease         
Hit:9 https://packages.zorinos.com/stable jammy InRelease                   
Hit:10 https://packages.zorinos.com/patches jammy InRelease
Hit:11 https://packages.zorinos.com/apps jammy InRelease
Hit:12 https://packages.zorinos.com/drivers jammy InRelease
Hit:13 https://packages.mozilla.org/apt mozilla InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
198 packages can be upgraded. Run 'apt list --upgradable' to see them.
noamtu123@noamtu123-Inspiron-5459:~$ sudo apt install python3.10-venv
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  libpython3.10 libpython3.10-minimal libpython3.10-stdlib python3-distutils
  python3-lib2to3 python3-pip-whl python3-setuptools-whl python3.10
  python3.10-minimal
Suggested packages:
  python3.10-doc binutils binfmt-support
The following NEW packages will be installed:
  python3-distutils python3-lib2to3 python3-pip-whl python3-setuptools-whl
  python3.10-venv
The following packages will be upgraded:
  libpython3.10 libpython3.10-minimal libpython3.10-stdlib python3.10
  python3.10-minimal
5 upgraded, 5 newly installed, 0 to remove and 193 not upgraded.
Need to get 2,690 kB/10.1 MB of archives.
After this operation, 4,091 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://il.archive.ubuntu.com/ubuntu jammy-updates/main amd64 python3-lib2to3 all 3.10.8-1~22.04 [77.6 kB]
Get:2 http://il.archive.ubuntu.com/ubuntu jammy-updates/main amd64 python3-distutils all 3.10.8-1~22.04 [139 kB]
Get:3 http://il.archive.ubuntu.com/ubuntu jammy-updates/universe amd64 python3-pip-whl all 22.0.2+dfsg-1ubuntu0.5 [1,680 kB]
Get:4 http://il.archive.ubuntu.com/ubuntu jammy-updates/universe amd64 python3-setuptools-whl all 59.6.0-1.2ubuntu0.22.04.2 [788 kB]
Get:5 http://il.archive.ubuntu.com/ubuntu jammy-updates/universe amd64 python3.10-venv amd64 3.10.12-1~22.04.9 [5,722 B]
Fetched 2,690 kB in 3s (939 kB/s)           
(Reading database ... 253592 files and directories currently installed.)
Preparing to unpack .../0-libpython3.10_3.10.12-1~22.04.9_amd64.deb ...
Unpacking libpython3.10:amd64 (3.10.12-1~22.04.9) over (3.10.12-1~22.04.6) ...
Preparing to unpack .../1-python3.10_3.10.12-1~22.04.9_amd64.deb ...
Unpacking python3.10 (3.10.12-1~22.04.9) over (3.10.12-1~22.04.6) ...
Preparing to unpack .../2-libpython3.10-stdlib_3.10.12-1~22.04.9_amd64.deb ...
Unpacking libpython3.10-stdlib:amd64 (3.10.12-1~22.04.9) over (3.10.12-1~22.04.6
) ...
Preparing to unpack .../3-python3.10-minimal_3.10.12-1~22.04.9_amd64.deb ...
Unpacking python3.10-minimal (3.10.12-1~22.04.9) over (3.10.12-1~22.04.6) ...
Preparing to unpack .../4-libpython3.10-minimal_3.10.12-1~22.04.9_amd64.deb ...
Unpacking libpython3.10-minimal:amd64 (3.10.12-1~22.04.9) over (3.10.12-1~22.04.
6) ...
Selecting previously unselected package python3-lib2to3.
Preparing to unpack .../5-python3-lib2to3_3.10.8-1~22.04_all.deb ...
Unpacking python3-lib2to3 (3.10.8-1~22.04) ...
Selecting previously unselected package python3-distutils.
Preparing to unpack .../6-python3-distutils_3.10.8-1~22.04_all.deb ...
Unpacking python3-distutils (3.10.8-1~22.04) ...
Selecting previously unselected package python3-pip-whl.
Preparing to unpack .../7-python3-pip-whl_22.0.2+dfsg-1ubuntu0.5_all.deb ...
Unpacking python3-pip-whl (22.0.2+dfsg-1ubuntu0.5) ...
Selecting previously unselected package python3-setuptools-whl.
Preparing to unpack .../8-python3-setuptools-whl_59.6.0-1.2ubuntu0.22.04.2_all.d
eb ...
Unpacking python3-setuptools-whl (59.6.0-1.2ubuntu0.22.04.2) ...
Selecting previously unselected package python3.10-venv.
Preparing to unpack .../9-python3.10-venv_3.10.12-1~22.04.9_amd64.deb ...
Unpacking python3.10-venv (3.10.12-1~22.04.9) ...
Setting up python3-setuptools-whl (59.6.0-1.2ubuntu0.22.04.2) ...
Setting up python3-pip-whl (22.0.2+dfsg-1ubuntu0.5) ...
Setting up libpython3.10-minimal:amd64 (3.10.12-1~22.04.9) ...
Setting up python3-lib2to3 (3.10.8-1~22.04) ...
Setting up python3-distutils (3.10.8-1~22.04) ...
Setting up python3.10-minimal (3.10.12-1~22.04.9) ...
Setting up libpython3.10-stdlib:amd64 (3.10.12-1~22.04.9) ...
Setting up libpython3.10:amd64 (3.10.12-1~22.04.9) ...
Setting up python3.10 (3.10.12-1~22.04.9) ...
Setting up python3.10-venv (3.10.12-1~22.04.9) ...
Processing triggers for libc-bin (2.35-0ubuntu3.8) ...
Processing triggers for man-db (2.10.2-1) ...
Processing triggers for mailcap (3.70+nmu1ubuntu1) ...
Processing triggers for desktop-file-utils (0.26-1ubuntu3) ...
Processing triggers for gnome-menus (3.36.0-1ubuntu3) ...
noamtu123@noamtu123-Inspiron-5459:~$ sudo apt install git
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  git-man liberror-perl
Suggested packages:
  git-daemon-run | git-daemon-sysvinit git-doc git-email git-gui gitk gitweb
  git-cvs git-mediawiki git-svn
The following NEW packages will be installed:
  git git-man liberror-perl
0 upgraded, 3 newly installed, 0 to remove and 193 not upgraded.
Need to get 4,147 kB of archives.
After this operation, 21.0 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://il.archive.ubuntu.com/ubuntu jammy/main amd64 liberror-perl all 0.17029-1 [26.5 kB]
Get:2 http://il.archive.ubuntu.com/ubuntu jammy-updates/main amd64 git-man all 1:2.34.1-1ubuntu1.12 [955 kB]
Get:3 http://il.archive.ubuntu.com/ubuntu jammy-updates/main amd64 git amd64 1:2.34.1-1ubuntu1.12 [3,165 kB]
Fetched 4,147 kB in 2s (2,018 kB/s)
Selecting previously unselected package liberror-perl.
(Reading database ... 253874 files and directories currently installed.)
Preparing to unpack .../liberror-perl_0.17029-1_all.deb ...
Unpacking liberror-perl (0.17029-1) ...
Selecting previously unselected package git-man.
Preparing to unpack .../git-man_1%3a2.34.1-1ubuntu1.12_all.deb ...
Unpacking git-man (1:2.34.1-1ubuntu1.12) ...
Selecting previously unselected package git.
Preparing to unpack .../git_1%3a2.34.1-1ubuntu1.12_amd64.deb ...
Unpacking git (1:2.34.1-1ubuntu1.12) ...
Setting up liberror-perl (0.17029-1) ...
Setting up git-man (1:2.34.1-1ubuntu1.12) ...
Setting up git (1:2.34.1-1ubuntu1.12) ...
Processing triggers for man-db (2.10.2-1) ...
noamtu123@noamtu123-Inspiron-5459:~$ git clone https://github.com/AdnanHodzic/auto-cpufreq.git
cd auto-cpufreq && sudo ./auto-cpufreq-installer
Cloning into 'auto-cpufreq'...
remote: Enumerating objects: 2834, done.
remote: Counting objects: 100% (905/905), done.
remote: Compressing objects: 100% (261/261), done.
remote: Total 2834 (delta 782), reused 644 (delta 644), pack-reused 1929 (from 2)
Receiving objects: 100% (2834/2834), 965.89 KiB | 3.55 MiB/s, done.
Resolving deltas: 100% (1579/1579), done.

─────────────────────────── auto-cpufreq installer ───────────────────────────

Welcome to auto-cpufreq tool installer.

Select a key [I]nstall/[R]emove or press ctrl+c to quit: i

libgirepository-2.0-dev needs to be installed for version bookworm/sid
---- 
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package libgirepository-2.0-dev
E: Couldn't find any package by glob 'libgirepository-2.0-dev'

──────────────────── Installing necessary Python packages ────────────────────

Requirement already satisfied: pip in /opt/auto-cpufreq/venv/lib/python3.10/site-packages (22.0.2)
Collecting pip
  Downloading pip-25.0.1-py3-none-any.whl (1.8 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.8/1.8 MB 4.4 MB/s eta 0:00:00
Collecting wheel
  Downloading wheel-0.45.1-py3-none-any.whl (72 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.5/72.5 KB 6.9 MB/s eta 0:00:00
Installing collected packages: wheel, pip
  Attempting uninstall: pip
    Found existing installation: pip 22.0.2
    Uninstalling pip-22.0.2:
      Successfully uninstalled pip-22.0.2
Successfully installed pip-25.0.1 wheel-0.45.1
Collecting PyGObject
  Downloading pygobject-3.52.3.tar.gz (1.2 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 4.3 MB/s eta 0:00:00
  Installing build dependencies ... error
  error: subprocess-exited-with-error
  
  × pip subprocess to install build dependencies did not run successfully.
  │ exit code: 1
  ╰─> [48 lines of output]
      Collecting meson-python>=0.12.1
        Downloading meson_python-0.17.1-py3-none-any.whl.metadata (4.1 kB)
      Collecting pycairo>=1.16
        Downloading pycairo-1.27.0.tar.gz (661 kB)
           ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 661.5/661.5 kB 4.1 MB/s eta 0:00:00
        Installing build dependencies: started
        Installing build dependencies: finished with status 'done'
        Getting requirements to build wheel: started
        Getting requirements to build wheel: finished with status 'done'
        Installing backend dependencies: started
        Installing backend dependencies: finished with status 'done'
        Preparing metadata (pyproject.toml): started
        Preparing metadata (pyproject.toml): finished with status 'error'
        error: subprocess-exited-with-error
      
        × Preparing metadata (pyproject.toml) did not run successfully.
        │ exit code: 1
        ╰─> [20 lines of output]
            + meson setup /tmp/pip-install-9k7ety5q/pycairo_9971ae6b6a36454f9fd5949f759e9615 /tmp/pip-install-9k7ety5q/pycairo_9971ae6b6a36454f9fd5949f759e9615/.mesonpy-13twhyag -Dbuildtype=release -Db_ndebug=if-release -Db_vscrt=md -Dwheel=true -Dtests=false --native-file=/tmp/pip-install-9k7ety5q/pycairo_9971ae6b6a36454f9fd5949f759e9615/.mesonpy-13twhyag/meson-python-native-file.ini
            The Meson build system
            Version: 1.7.2
            Source dir: /tmp/pip-install-9k7ety5q/pycairo_9971ae6b6a36454f9fd5949f759e9615
            Build dir: /tmp/pip-install-9k7ety5q/pycairo_9971ae6b6a36454f9fd5949f759e9615/.mesonpy-13twhyag
            Build type: native build
            Project name: pycairo
            Project version: 1.27.0
      
            ../meson.build:1:0: ERROR: Unknown compiler(s): [['cc'], ['gcc'], ['clang'], ['nvc'], ['pgcc'], ['icc'], ['icx']]
            The following exception(s) were encountered:
            Running `cc --version` gave "[Errno 2] No such file or directory: 'cc'"
            Running `gcc --version` gave "[Errno 2] No such file or directory: 'gcc'"
            Running `clang --version` gave "[Errno 2] No such file or directory: 'clang'"
            Running `nvc --version` gave "[Errno 2] No such file or directory: 'nvc'"
            Running `pgcc --version` gave "[Errno 2] No such file or directory: 'pgcc'"
            Running `icc --version` gave "[Errno 2] No such file or directory: 'icc'"
            Running `icx --version` gave "[Errno 2] No such file or directory: 'icx'"
      
            A full log can be found at /tmp/pip-install-9k7ety5q/pycairo_9971ae6b6a36454f9fd5949f759e9615/.mesonpy-13twhyag/meson-logs/meson-log.txt
            [end of output]
      
        note: This error originates from a subprocess, and is likely not a problem with pip.
      error: metadata-generation-failed
      
      × Encountered error while generating package metadata.
      ╰─> See above for output.
      
      note: This is an issue with the package mentioned above, not pip.
      hint: See above for details.
      [end of output]
  
  note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

──────────────────────── Installing auto-cpufreq tool ────────────────────────

Processing /home/noamtu123/auto-cpufreq
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
  Preparing metadata (pyproject.toml) ... done
Collecting pyinotify@ git+https://github.com/shadeyg56/pyinotify-3.12 (from auto-cpufreq==2.5.0+3898246)
  Cloning https://github.com/shadeyg56/pyinotify-3.12 to /tmp/pip-install-u1o0coqd/pyinotify_f0cefc1342834747becb1037c301eae6
  Running command git clone --filter=blob:none --quiet https://github.com/shadeyg56/pyinotify-3.12 /tmp/pip-install-u1o0coqd/pyinotify_f0cefc1342834747becb1037c301eae6
  Resolved https://github.com/shadeyg56/pyinotify-3.12 to commit 271b7aba3269116b6c3870355393f47c79bce146
  Preparing metadata (setup.py) ... done
Collecting click<9.0.0,>=8.1.0 (from auto-cpufreq==2.5.0+3898246)
  Downloading click-8.1.8-py3-none-any.whl.metadata (2.3 kB)
Collecting distro<2.0.0,>=1.8.0 (from auto-cpufreq==2.5.0+3898246)
  Downloading distro-1.9.0-py3-none-any.whl.metadata (6.8 kB)
Collecting psutil<8.0.0,>=6.0.0 (from auto-cpufreq==2.5.0+3898246)
  Downloading psutil-7.0.0-cp36-abi3-manylinux_2_12_x86_64.manylinux2010_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (22 kB)
Collecting pyasyncore<2.0.0,>=1.0.4 (from auto-cpufreq==2.5.0+3898246)
  Downloading pyasyncore-1.0.4-py3-none-any.whl.metadata (3.7 kB)
Collecting requests<3.0.0,>=2.32.3 (from auto-cpufreq==2.5.0+3898246)
  Downloading requests-2.32.3-py3-none-any.whl.metadata (4.6 kB)
Collecting urwid<3.0.0,>=2.6.16 (from auto-cpufreq==2.5.0+3898246)
  Downloading urwid-2.6.16-py3-none-any.whl.metadata (11 kB)
Collecting charset-normalizer<4,>=2 (from requests<3.0.0,>=2.32.3->auto-cpufreq==2.5.0+3898246)
  Downloading charset_normalizer-3.4.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (35 kB)
Collecting idna<4,>=2.5 (from requests<3.0.0,>=2.32.3->auto-cpufreq==2.5.0+3898246)
  Downloading idna-3.10-py3-none-any.whl.metadata (10 kB)
Collecting urllib3<3,>=1.21.1 (from requests<3.0.0,>=2.32.3->auto-cpufreq==2.5.0+3898246)
  Downloading urllib3-2.3.0-py3-none-any.whl.metadata (6.5 kB)
Collecting certifi>=2017.4.17 (from requests<3.0.0,>=2.32.3->auto-cpufreq==2.5.0+3898246)
  Downloading certifi-2025.1.31-py3-none-any.whl.metadata (2.5 kB)
Collecting typing-extensions (from urwid<3.0.0,>=2.6.16->auto-cpufreq==2.5.0+3898246)
  Downloading typing_extensions-4.13.1-py3-none-any.whl.metadata (3.0 kB)
Collecting wcwidth (from urwid<3.0.0,>=2.6.16->auto-cpufreq==2.5.0+3898246)
  Downloading wcwidth-0.2.13-py2.py3-none-any.whl.metadata (14 kB)
Downloading click-8.1.8-py3-none-any.whl (98 kB)
Downloading distro-1.9.0-py3-none-any.whl (20 kB)
Downloading psutil-7.0.0-cp36-abi3-manylinux_2_12_x86_64.manylinux2010_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (277 kB)
Downloading pyasyncore-1.0.4-py3-none-any.whl (10 kB)
Downloading requests-2.32.3-py3-none-any.whl (64 kB)
Downloading urwid-2.6.16-py3-none-any.whl (297 kB)
Downloading certifi-2025.1.31-py3-none-any.whl (166 kB)
Downloading charset_normalizer-3.4.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (146 kB)
Downloading idna-3.10-py3-none-any.whl (70 kB)
Downloading urllib3-2.3.0-py3-none-any.whl (128 kB)
Downloading typing_extensions-4.13.1-py3-none-any.whl (45 kB)
Downloading wcwidth-0.2.13-py2.py3-none-any.whl (34 kB)
Building wheels for collected packages: auto-cpufreq, pyinotify
  Building wheel for auto-cpufreq (pyproject.toml) ... done
  Created wheel for auto-cpufreq: filename=auto_cpufreq-2.5.0+3898246-py3-none-any.whl size=49136 sha256=822087538d31e41c9524a6ac4328163c95ec7e6588767ba5489add62afc5562a
  Stored in directory: /root/.cache/pip/wheels/ff/24/63/08867e8efba8de960065fe542e6a21683ab1eb0331354eb9ee
  Building wheel for pyinotify (setup.py) ... done
  Created wheel for pyinotify: filename=pyinotify-0.9.6-py3-none-any.whl size=25128 sha256=cb0d9d09f608010a5794ed4595da95197d399a801e38000940aa3b8bb1f43b3e
  Stored in directory: /tmp/pip-ephem-wheel-cache-yrgod6ro/wheels/05/96/04/46756d3df7a942bbde7e1f94ee3f5a6942e98460487d4bafd4
Successfully built auto-cpufreq pyinotify
Installing collected packages: wcwidth, pyinotify, pyasyncore, urllib3, typing-extensions, psutil, idna, distro, click, charset-normalizer, certifi, urwid, requests, auto-cpufreq
Successfully installed auto-cpufreq-2.5.0+3898246 certifi-2025.1.31 charset-normalizer-3.4.1 click-8.1.8 distro-1.9.0 idna-3.10 psutil-7.0.0 pyasyncore-1.0.4 pyinotify-0.9.6 requests-2.32.3 typing-extensions-4.13.1 urllib3-2.3.0 urwid-2.6.16 wcwidth-0.2.13

────────────────── auto-cpufreq tool successfully installed ──────────────────

For list of options, run:
auto-cpufreq --help

noamtu123@noamtu123-Inspiron-5459:~/auto-cpufreq$ auto-cpufreq --help
Usage: auto-cpufreq [OPTIONS]

Options:
  --monitor           Monitor and see suggestions for CPU optimizations
  --live              Monitor and make (temp.) suggested CPU optimizations
  --install           Install daemon for (permanent) automatic CPU
                      optimizations
  --update TEXT       Update daemon and package for (permanent) automatic CPU
                      optimizations
  --remove            Remove daemon for (permanent) automatic CPU
                      optimizations
  --force TEXT        Force use of either "powersave" or "performance"
                      governors. Setting to "reset" will go back to normal
                      mode
  --config TEXT       Use config file at defined path
  --stats             View live stats of CPU optimizations made by daemon
  --completions TEXT  Enables shell completions for bash, zsh and fish.
                      Possible values bash|zsh|fish
  --debug             Show debug info (include when submitting bugs)
  --version           Show currently installed version
  --donate            Support the project
  --help              Show this message and exit.
noamtu123@noamtu123-Inspiron-5459:~$ sudo auto-cpufreq --debug
[sudo] password for noamtu123:      

-------------------------------------------------------------------------------

Linux distro: Zorin OS 17 jammy
Linux kernel: 6.8.0-57-generic
Processor: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz
Cores: 4
Architecture: x86_64
Driver: intel_pstate

------------------------------ Current CPU stats ------------------------------

CPU max frequency: 2800 MHz
CPU min frequency: 400 MHz

Core	Usage	Temperature	Frequency
CPU0      0.0%        33 °C      2725 MHz
CPU1      1.0%        34 °C      2762 MHz
CPU2      0.0%        33 °C      2709 MHz
CPU3      1.0%        34 °C      2783 MHz

CPU fan speed: 0 RPM

auto-cpufreq version: 2.5.0

Python: 3.10.12
psutil package: 7.0.0
platform package: 1.0.8
click package: 8.1.8
distro package: 1.9.0

Computer type: Notebook
Docking Station
Battery is: charging

auto-cpufreq system resource consumption:
cpu usage: 0.0 %
memory use: 0.44 %

Total CPU usage: 0.8 %
Total system load: 0.89
Average temp. of all cores: 35.00 °C 

Currently using: performance governor
Currently turbo boost is: on
noamtu123@noamtu123-Inspiron-5459:~$ cat /etc/debian_version
bookworm/sid

NOTE: it seems that the gui app isn't working
I have tried installing this so many times without any success (though at the end of each time it always said installation succeed) no command worked and i couldn't remove the files via the installer (r for remove instead of i) because it didn't really install (maybe using the installer to remove did uninstall it but a lot of files from this utility stayed so i tried so many things to reinstall it properly (talking with dozens of LLM's: chatgpt, claude, perplexity, gemini to do troubleshooting and i ended up accidentally deleting the /opt directory so i ended up reinstalling the system because i didn't have any backups and didn't know what was in this directory (it wasn't so awful because this is just a project of retrieving my old laptop back to life and i didn't have too much stuff on it) i have tried to install all of the dependencies by my self and i tried dozens of others things.
the important thing is that now it's working (tough i don't know why) but the installation still had some errors and i'll be happy for anyone who could explain those errors and help me fix them

NOTE: all the commands shown in the terminal were straight after fresh installation of the os (i have checked the option in the installation that does updates in the installation process)

Answered by AdnanHodzic

Apr 10, 2025

This is an issue that came out of #826. So let's continue the discussion as part of #833

Btw, since you didn't include auto-cpufreq --debug, which distro (including release) are you using and can you share what you get as part of cat /etc/debian_version

View full answer

AdnanHodzic · 2025-04-09T17:38:55Z

AdnanHodzic
Apr 9, 2025
Maintainer

Relates to #833 and changes made as part of #826

2 replies

noamtu123 Apr 9, 2025
Author

Relates to #833 and changes made as part of #826

I'm sorry, I'm having trouble fixing it. Could you please guide me?

AdnanHodzic Apr 10, 2025
Maintainer

This is an issue that came out of #826. So let's continue the discussion as part of #833

Btw, since you didn't include auto-cpufreq --debug, which distro (including release) are you using and can you share what you get as part of cat /etc/debian_version

Answer selected by noamtu123

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

Errors while installing(successfully installed) #834

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{editor}}'s edit

{{editor}}'s edit

Uh oh!

Replies: 1 comment 2 replies

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{editor}}'s edit

{{editor}}'s edit

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{editor}}'s edit

{{editor}}'s edit

Uh oh!

Select a reply

Uh oh!

Uh oh!

Errors while installing(successfully installed) #834

Uh oh!

Uh oh!

noamtu123 Apr 9, 2025

Replies: 1 comment · 2 replies

Uh oh!

AdnanHodzic Apr 9, 2025 Maintainer

Uh oh!

Uh oh!

noamtu123 Apr 9, 2025 Author

Uh oh!

Uh oh!

AdnanHodzic Apr 10, 2025 Maintainer

noamtu123
Apr 9, 2025

Replies: 1 comment 2 replies

AdnanHodzic
Apr 9, 2025
Maintainer

noamtu123 Apr 9, 2025
Author

AdnanHodzic Apr 10, 2025
Maintainer