Image mask on v2024.12.06_04 is not applied

[RudyUitDordt]

The mask I had in place to black out some areas on the image is not being applied, the modules are active and the png file is where it should be (/allsky/config/overlay/images).

support-none-20250615104347.zip

[EricClaeys]

@Alex-developer,
Can you take a look please?

[RudyUitDordt]

The raspberry pi was shutting down due to overheating. I opened it up and found out the fans weren't spinning. These are controlled via various modules in the module manager (temperature sensors, dew sensors, relay control, fan control, etc). But I guess not only the mask module isn't functional, so are the other modules. So for safety purposed I downgraded again to version 2024.12.06_01. Everything is operational now, also the text overlay from my other ticket.

[Alex-developer]

From the allsky logs is looks like umpy is missing.

2025-06-15T00:00:37.898196+02:00 allsky allsky[4752]: STARTING EXPOSURE at: 2025-06-15 00:00:37   @ 20.2 sec
2025-06-15T00:01:00.848565+02:00 allsky allsky[4752]:   > Saving NIGHT image 'image-20250615000037.jpg'
2025-06-15T00:01:01.283601+02:00 allsky allsky[8276]: Traceback (most recent call last):
2025-06-15T00:01:01.284304+02:00 allsky allsky[8276]:   File "/home/allsky/allsky/scripts/flow-runner.py", line 9, in <module>
2025-06-15T00:01:01.284772+02:00 allsky allsky[8276]:     import numpy
2025-06-15T00:01:01.284923+02:00 allsky allsky[8276]: ModuleNotFoundError: No module named 'numpy'

However from the install logs dumpy was installed

Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: numpy>=1.25.0 in ./venv/lib/python3.11/site-packages (from -r /tmp/package (line 1)) (1.26.4)
Collecting numpy>=1.25.0
  Using cached numpy-2.3.0-cp311-cp311-linux_armv7l.whl
Installing collected packages: numpy
  Attempting uninstall: numpy
    Found existing installation: numpy 1.26.4
    Uninstalling numpy-1.26.4:
      Successfully uninstalled numpy-1.26.4
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
scipy 1.11.3 requires numpy<1.28.0,>=1.21.6, but you have numpy 2.3.0 which is incompatible.
Successfully installed numpy-2.3.0

Try the following and see if it fixes the issue

source /home/allsky/venv/bin/activate
pip3 install -r /home/allsky/config_repo/requirements-bookwork-64.txt

That will install all of the required modules for Bookwork

If that all goes ok run the following and see if the error has gone

tail -f /var/log/allsky.log