Wall-based IfcOpeningElements from doors and windows behaving differently

[andydandy74]

Looks like IfcOpeningElement objects generated from doors or windows do not behave the same way as those generated from wall-hosted Generic Model void cut families (exported as IfcBuildingElementProxy):

• Property set Pset_OpeningElementCommon is not exported.
• Base quantities are not exported
• IfcRectangleProfileDef.ProfileName not exported (Yes, I know that's an optional attribute, but it exports for the Generic Model openings so why not here, too? Solibri seems to use either this property or the opening's Reference attribute - also not exported - for structuring its model browser, see screenshot below)

Would be great if the export behaviour could be consistent for all wall based openings.

• Exporter: 23.2.5
• Tried IFC2x3CV2.0 & IFC4RVArch.
• Tried old and new shared parameters

IfcOpeningElement of a generic model void cut family:

IfcOpeningElement of a door family:

[andydandy74]

Minimal model here: https://github.com/andydandy74/MyIssues/raw/master/RevitIFC621/068_IFC_Pset_OpeningElementCommon.rvt

[andydandy74]

BaseQuantities issue fixed in 24.2, but still no Pset

[ArtemHnatko]

This issue is also reported in Jira as "REVIT-234989" and is currently in the "Open" status.