Can this also mine BCH since its a fork of BTC? #381
Replies: 6 comments 14 replies
-
|
If there is a solo BCH pool that accepts low hash rate, low difficulty and pool password as “x”, yes Nerdminer could mine BCH. |
Beta Was this translation helpful? Give feedback.
-
|
This is the pool i tried |
Beta Was this translation helpful? Give feedback.
-
|
when you check your wallet address at the pool, does it say you are mining? |
Beta Was this translation helpful? Give feedback.
-
|
Set up one of my miners just now and from their website. |
Beta Was this translation helpful? Give feedback.
-
|
I believe there may be an issue with his server or site for BCH. I had a stable connection for about a week then Sunday it stopped working. When I go to http://retromike.net/?#bch1 and look at stats the graphs don't load. Under stats it shows 3 miners but when you click on miners it shows nothing. I tried to reconnect to BCH on retromike but not able to get them to connect since. I moved 6 of my ESP32 miners over to digibytes. That worked for about 24 hours but then they started to power cycle. ON a side note, the miners I had connected to digibytes also started to power cycle all at the same time. 3 ESP32 WROOM (another odd thing, 2 of them the BLUE LED no longer work). 1 T-Display S3 and 2 ESP32-2432s028r. |
Beta Was this translation helpful? Give feedback.
-
|
I encountered the same connection error and the same behavior as my miner. |
Beta Was this translation helpful? Give feedback.
-
|
On retromike I have 22 pending shares for digibyte and 1 pending share for Bitcoin cash, but don't know what that means. Ill admit I am not new to crypto but new to mining. Not trying to get rich off it, just experimenting and using thesee to learn more about the technology. Looking at getting a couple of Avalon Nano 3, Lucky Miner LV06 and maybe a couple BitAxe miners next. |
Beta Was this translation helpful? Give feedback.
-
|
@Cr4zyT1zy did the blue LED stop working on yours as well? or was it just power cycling? |
Beta Was this translation helpful? Give feedback.
-
|
Follow up. Took me a bit but re-loading the firmware and then the nerdminer software got the blue LED working on the 2 non display units. So all is working with them. back on original BTC solo mining. Still trying to locate a good stable BCH solo mining pool. |
Beta Was this translation helpful? Give feedback.
-
|
Any update? Is there a solo pool for BCH? |
Beta Was this translation helpful? Give feedback.
-
|
I have not been able to find a solo pool for BCH. |
Beta Was this translation helpful? Give feedback.
-
|
Just wanted to update the post. I have a working Solo pool for BCH. |
Beta Was this translation helpful? Give feedback.
-
|
Hallo, |
Beta Was this translation helpful? Give feedback.
-
That is the website address. You go to the website and you will find the connection page with all the connection information. |
Beta Was this translation helpful? Give feedback.
-
|
Danke, auf der Webseite war ich schon 2 - 3 mal aber habe die adresse und den Port nicht gefunden. Danke für deine Hilfe und frohes Minen |
Beta Was this translation helpful? Give feedback.
-
I was curious if these can also work on BCH? I reset one of mine, added a solo mining pool and BCH address and it was showing block status and hash rate. The solo pool also showed the miner on their website when i checked its stats. But does that actually mean its properly trying to mine on BCH? Not sure how the back end stuff works. I can only assume since its SHA256 and a fork of BTC that it would work. Was hoping someone on the dev team could elaborate more on this. OR if a new fork could be created for BCH mining. I only have 4 of the 2.8inch display ones but got a few WROOM units coming soon.
Thanks in advance. And great project. Makes me wish i would have learned more software when i was younger vs gong the hardware route and fixing stuff.
Beta Was this translation helpful? Give feedback.
All reactions