Reconstruction to a volume file

[Paweluswawelus]

Hello community
I wanted to ask you if it is possible to create a volume file, e.g., raw or vol, so that I can open it in VG Studio MAX 2024.1?
My tomograph creates projections in .tif format (e.g., 2000 images of a single object) and rotates them at an angle (e.g., 360 degrees/2000 projections), and then reconstructs them in the Datos|x 2 reconstruction program. There, I can also optimize the scan and correct beam hardening.
Then it creates a vgl file (interface for opening the file in VG Studio MAX) and a volume file in .vol format.
VG Studio max opens files in which I can set the surface boundary based on the histogram (I am sending a video of what it looks like in the attachment).

I would like to do exactly the same thing using the algorithms available in TIGRE, which is why I would like to ask the com

https://github.com/user-attachments/assets/508fb05f-84d1-44e2-a5c1-6bc34c786111

H__Element_AJ_Element_AJ_.mp4

munity for help with this task.
Attached is a photo of the CT scanner's operating parameters and the volume formats I can import into VG Studio MAX

My attempts so far have been unsuccessful, and I have not achieved what I had intended.
Best Regards

[AnderBiguri]

Ah, I have done this in the past and I can't find the code.
As far as I remeber, a .vol is simply a binary raw file, right? I think I just dumped the data in a binary file and called it .vol, that was enough.

[Paweluswawelus]

Thank you for your quick response. I will try to do that and let you know if I managed to do it.
PS. The video I added was created using Datos]x 2 reconstruction software and open VG studio max, I forgot to mention that.

[Paweluswawelus]

I tried to reconstruct the data file into a file that I could open in VG Studio MAX, but unfortunately I was unsuccessful. I used various algorithms available in TIGRE, but I always got the same error.
I don't know what the reason is :(
For comparison, the same sample datos|x 2 rec reconstructed in 90 seconds, and here an error appears immediately at the start of reconstruction.
Perhaps this is due to the size of the batch data or bad code or settings, but in my scientific work I also wanted to use the algorithms available in TIGRE.
I am attaching the code and screenshots of information from PyCharm and information about the tif file (in this sample, I wanted

it to import 1250 tif files).
I tried using two graphics at once, but the same error occurred.
Could you help me with this?
Tigre cgls Krylov.txt

[Paweluswawelus]

The example.py works fine.

[AnderBiguri]

@Paweluswawelus to help with this, can you :

1- make a new issue
2-Post a minimal code reproducing the error in the post (please no attachments). Minimal in the sense that it has the least amount of code.