Placement of the electronic components

[FCam1]

Hi,
Thanks a lot for this design !
I am building a DieBieSlave board and I encounter difficulties to know the implantation of each components.
I tried with Altium and Cadence to extract the names (L8,C1...) but I can't isolate the layer "name" for each side, it seems the names are on the same layer.
For the instant I wrote the name of each components one by one on a photo of the board but is fastidious and source of errors.

How did you do for mounting your board? Do you have the implantation scheme?

[DieBieEngineering]

You can download a free Altium viewer version which allows you to see the board in Altium. This is probably the best and easiest solution.

…

On Fri, Aug 2, 2019, 11:04 Florenc Caminade ***@***.***> wrote: Hi, Thanks a lot for this design ! I am building a DieBieSlave board and I encounter difficulties to know the implantation of each components. I tried with Altium and Cadence to extract the names (L8,C1...) but I can't isolate the layer "name" for each side, it seems the names are on the same layer. For the instant I wrote the name of each components one by one on a photo of the board but is fastidious and source of errors. How did you do for mounting your board? Do you have the implantation scheme? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#3?email_source=notifications&email_token=ACQ75HUCYPP5DBJGWMBVNILQCP2AVA5CNFSM4II32JC2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HDAK3UQ>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ACQ75HX4CDUVG3FPPOVD7XLQCP2AVANCNFSM4II32JCQ> .