Panels do report close events

[sirvictory444]

"The panel only sends fault messages when a zone is faulted or alarmed and does not send data when the zone is restored".

They can report closes, both wired and wireless. The Big Blue company always nerfed their firmware, perhaps what you have is.

I have several 20p, various firmware versions, bought through a Honeywell dealer and they all immediately report zone closings. As I understand it, this is not accounted for because your panel doesn't report closes and instead a TTL was implemented, is that correct?
Would it be hard to add reading those events from the ecp bus?

I used to have an EVL-4 that would report immediate closings, but sadly a lapse in my IoT firewall rules allowed it to phone home and it received a firmware update and zone status is now very slow. I'm looking to build and use your software now.

[Dilbert66]

Vista's do not report closing to the display that I know of. Perhaps you can post logs of your panel messsages and we can see if yours is reporting different then others. There is no way for me to know about those supposed events unless I see packet logs.

[rcmurphy]

Oooh, let me know what to look for; would love to see if 250s are different. The alarm company I have is amazing about explaining the internals; I'll ask them too.

…

On Mon, Jun 5, 2023 at 9:16 AM Alain Turbide ***@***.***> wrote: Vista's do not report closing to the display that I know of. Perhaps you can post logs of your panel messsages and we can see if yours is reporting different then others. There is no way for me to know about those supposed events unless I see packet logs. — Reply to this email directly, view it on GitHub <#105 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABGIMYGTK7FPNRVEE6S277TXJXL4XANCNFSM6AAAAAAX32WX4I> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[Dilbert66]

Ok, I should clarify. The display really only displays what the panel sends it. When a fault occurs, the panel sends a "fault" message to the display. When the fault is restored, there is no "restored" message. It simply stops sending the fault message. My firmware basically only emulates a display panel. Now having said that, I also added the ability to capture messages from the RF module to the panel since those are sent on the same bus. With those I can capture open/close/battery status messages direct from the device . That's the exception. With wired zones that is not happening since the panel detects those open/close events directly and nothing is sent on the bus so we have to depend on what the alarm panel sends out to the display.

Now there is a way to detect close messages from the internal 8 wired zones but that requires the convoluted use of emulated relay followers, etc which I wont' get into here. So I don't see why Vista would have firmware that would send "restore" events to the panel for no reason since it doesnt display them anyhow. If your panel does display those restore, I'd be suprised, but hey, I havent seen everthing. Post logs of a fault/restore of a zone and we will see if the data supports what you are telling me.

None of this of course will work with 250 devices because they use the external loop interface to talk to the panel

[ChrisLizon]

@Dilbert66 Based on your response there I'm curious if Zones on Zone Expanders such as the 4219 would be faster to report the closed events since they're operating on the ECP bus? I would be tempted to add a zone expander and move my "important" zones to the zone expander if they're going to update quicker.

I'm also tempted to attempt to build a board that acts as a zone expander with a analog to digital chip (I don't really awnt to cut out the EOL resistors) on the i2c bus using your library. I just haven't quite figured that out yet. :D

[Dilbert66]

Yes, they would report the close events immediately as the communications between the expanders and the panel are captured and processed.

[rwoldberg]

I have a Vista20P and I noticed that the panels report immediately when I close a door. The ready light turns on in under one second when I close the door, so there must be some message that is being sent. What logs would help figure out the message? Should I just capture the output from the ESPHome log output?

[Dilbert66]

You have to realize that the usual door switches are connected directly to the panel and not to the bus. The panel will detect the closure immediately because of that circuit, not because of a bus message. The panel will not send out a close message on the bus. It only sends out Fault messages to the keypads. The only way that a close event will be seen on the bus is if the door sensor is an RF module or attached to a zone expander so those messages will be captured on the bus. This is why the ESP code relies on an absense of a fault message for a period of time to determine a close event. Since you did not indicate how your door is wired to the panel, I'm assuing it's one of the built in panel zones.

[rwoldberg]

Sorry I was not clear with that message, I have two keypads attached to the main controller, when I open and close a door the keypads show both the open and close immediately, there is no delay as there is with the ESPHome integration. The keypads are connected exactly the same as the ESP32 module so they should receive the same data correct? And yes all of my switch are wired I have 16, 8 wired to the panel and another 8 wired via a zone expander. I was testing with the front door which is wired to the panel no the zone expander.

[Dilbert66]

You'll need to be more specific here as to what keypads you have. With 6160 keypads, all you see are the fault/alarm messages. You do not see closure messages. The ESP code is emulating a 6160 type LCD keypad.

[Dilbert66]

I re-read your message. The ready light turning on/off with the zone action is a different message altogether. When an open zone is closed, and if there are no other open zones on that partition, a ready message will be sent on the bus and the ESP code will show that as soon as it gets it which would be the same time as your physical keypad. If your implementation is not showing the ready signal quickly then there is something else at play than the esp code since there should not be any delay showing the ready light on.

[rwoldberg]

I was looking at that and I think the wired keypads when they get the READY message they also clear the code for the open switches. I was thinking maybe the integration could do the same thing, when it sees the READY message then trigger the close event for any opened switches, since they would have to be closed for the system to ready. Also I have to key pads an ADEMCO 6150 and a Honeywell 6271c graphical keypad. The graphical keypad shows the open zones, when one closes it is removed from the keypad in 2 seconds, but if I set the timeout in the ESPHome integration to 2 seconds, any open zone will continually trigger open and close. Why do you think there would be a difference?

[Dilbert66]

ah.. ok, I misunderstood what you were saying. Yes, I had mean to implement the reset of open zones when the ready flag is active but forgot about it since I got busy with other aspects. I'll do that. Thanks for reminding me. The graphical keypad works differently as it has a different protocol then the 6160 keypads. It has more info provided to it from the panel. As to the TTL timer, if you set it too short, it will timeout and think the zone is closed but then an updated Fault message comes in and retriggers it as open again.

[rwoldberg]

Oh, interesting. I get setting the TTL too low causes issue, I was just wondering why my keypad was behaving differently, now I know. Thanks.

[Dilbert66]

Actually, if you can, can you post esphome logs of the traffic you get when a zone is opened or closed? You would need to be using the dev branch version of the code though. I'm particularely interested in the F2 packet messages as those are the ones that hold the traffic between the panel and the 6170 keypad. I could potentially use this traffic to speed up zone status updates. It can also be used for other functions as retrieving panel status data such as partitions, attached devices, active zones, etc.

I've also updated the dev branch to clear zone's when the partition is in status ready as discussed.

[rwoldberg]

Here is some data from opening and closing a door a couple times:
[20:29:15][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 54 FE FE EC 03 01 01 01 BC
[20:29:18][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:18][I][CHK:572]: 2024-05-15 20:29 61 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:18][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 55 FE FE EC 03 01 01 01 BB
[20:29:19][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 08 00 1C 28 02 00 00 48
[20:29:19][I][vista_alarm:947]: Partition: 01
[20:29:19][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'HOUSE '
[20:29:19][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'CHIME,Rdy to Arm'
[20:29:19][I][vista_alarm:971]: Prompt: HOUSE
[20:29:19][I][vista_alarm:972]: Prompt: CHIME,Rdy to Arm
[20:29:19][I][vista_alarm:973]: Beeps: 0
[20:29:22][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 66 6C 02 45 6C F5 EC 01 01 01 00 00 2D
[20:29:22][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 67 63 02 45 43 F5 31 FB 45 6C F5 EC 03 02 01 06 7F
[20:29:22][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 01 03 00 28 02 00 00 46
[20:29:22][I][vista_alarm:947]: Partition: 01
[20:29:22][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'FAULT 01 FRONT '
[20:29:22][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'DOOR '
[20:29:22][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '3'
[20:29:22][I][vista_alarm:971]: Prompt: FAULT 01 FRONT
[20:29:22][I][vista_alarm:972]: Prompt: DOOR
[20:29:22][I][vista_alarm:973]: Beeps: 3
[20:29:22][D][binary_sensor:036]: 'Front Door': Sending state ON
[20:29:22][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state OFF
[20:29:22][D][text_sensor:064]: 'Zone Status (zs)': Sending state 'OP:1'
[20:29:22][W][component:237]: Component vista_alarm_panel took a long time for an operation (64 ms).
[20:29:22][W][component:238]: Components should block for at most 30 ms.
[20:29:22][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:22][I][CHK:572]: 2024-05-15 20:29 A1 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:22][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 56 FE FE EC 03 02 01 06 B4
[20:29:25][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 60 6C 02 45 6C F5 EC 01 01 01 00 00 33
[20:29:25][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 61 63 02 45 43 F5 31 FB 45 6C F5 EC 03 01 01 01 8B
[20:29:25][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 08 00 1C 28 02 00 00 48
[20:29:25][I][vista_alarm:947]: Partition: 01
[20:29:25][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'HOUSE '
[20:29:25][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'CHIME,Rdy to Arm'
[20:29:25][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '0'
[20:29:25][I][vista_alarm:971]: Prompt: HOUSE
[20:29:25][I][vista_alarm:972]: Prompt: CHIME,Rdy to Arm
[20:29:25][I][vista_alarm:973]: Beeps: 0
[20:29:25][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state ON
[20:29:25][D][binary_sensor:036]: 'Front Door': Sending state OFF
[20:29:25][D][text_sensor:064]: 'Zone Status (zs)': Sending state ''
[20:29:25][W][component:237]: Component vista_alarm_panel took a long time for an operation (67 ms).
[20:29:25][W][component:238]: Components should block for at most 30 ms.
[20:29:25][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:25][I][CHK:572]: 2024-05-15 20:29 E1 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:25][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 57 FE FE EC 03 01 01 01 B9
[20:29:27][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 01 03 00 28 02 00 00 46
[20:29:27][I][vista_alarm:947]: Partition: 01
[20:29:27][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'FAULT 01 FRONT '
[20:29:27][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'DOOR '
[20:29:27][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '3'
[20:29:27][I][vista_alarm:971]: Prompt: FAULT 01 FRONT
[20:29:27][I][vista_alarm:972]: Prompt: DOOR
[20:29:27][I][vista_alarm:973]: Beeps: 3
[20:29:27][D][binary_sensor:036]: 'Front Door': Sending state ON
[20:29:27][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state OFF
[20:29:27][D][text_sensor:064]: 'Zone Status (zs)': Sending state 'OP:1'
[20:29:27][W][component:237]: Component vista_alarm_panel took a long time for an operation (108 ms).
[20:29:27][W][component:238]: Components should block for at most 30 ms.
[20:29:27][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 62 6C 02 45 6C F5 EC 01 01 01 00 00 31
[20:29:28][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 63 63 02 45 43 F5 31 FB 45 6C F5 EC 03 02 01 06 83
[20:29:28][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:28][I][CHK:572]: 2024-05-15 20:29 21 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:28][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 50 FE FE EC 03 02 01 06 BA
[20:29:28][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:28][I][CHK:572]: 2024-05-15 20:29 61 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:28][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 51 FE FE EC 03 02 01 06 B9
[20:29:30][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 64 6C 02 45 6C F5 EC 01 01 01 00 00 2F
[20:29:30][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 65 63 02 45 43 F5 31 FB 45 6C F5 EC 03 01 01 01 87
[20:29:30][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 08 00 1C 28 02 00 00 48
[20:29:30][I][vista_alarm:947]: Partition: 01
[20:29:30][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'HOUSE '
[20:29:30][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'CHIME,Rdy to Arm'
[20:29:30][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '0'
[20:29:30][I][vista_alarm:971]: Prompt: HOUSE
[20:29:30][I][vista_alarm:972]: Prompt: CHIME,Rdy to Arm
[20:29:30][I][vista_alarm:973]: Beeps: 0
[20:29:30][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state ON
[20:29:30][D][binary_sensor:036]: 'Front Door': Sending state OFF
[20:29:30][D][text_sensor:064]: 'Zone Status (zs)': Sending state ''
[20:29:30][W][component:237]: Component vista_alarm_panel took a long time for an operation (69 ms).
[20:29:30][W][component:238]: Components should block for at most 30 ms.
[20:29:30][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:30][I][CHK:572]: 2024-05-15 20:29 A1 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:30][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 52 FE FE EC 03 01 01 01 BE
[20:29:32][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 66 6C 02 45 6C F5 EC 01 01 01 00 00 2D
[20:29:32][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 67 63 02 45 43 F5 31 FB 45 6C F5 EC 03 02 01 06 7F
[20:29:32][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 01 03 00 28 02 00 00 46
[20:29:32][I][vista_alarm:947]: Partition: 01
[20:29:32][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'FAULT 01 FRONT '
[20:29:32][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'DOOR '
[20:29:32][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '3'
[20:29:32][I][vista_alarm:971]: Prompt: FAULT 01 FRONT
[20:29:32][I][vista_alarm:972]: Prompt: DOOR
[20:29:32][I][vista_alarm:973]: Beeps: 3
[20:29:32][D][binary_sensor:036]: 'Front Door': Sending state ON
[20:29:32][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state OFF
[20:29:32][D][text_sensor:064]: 'Zone Status (zs)': Sending state 'OP:1'
[20:29:32][W][component:237]: Component vista_alarm_panel took a long time for an operation (64 ms).
[20:29:32][W][component:238]: Components should block for at most 30 ms.
[20:29:32][I][CMD:572]: 2024-05-15 20:29 FA 01 02 25 F7 E7 00 00 00 00 00 00 00
[20:29:33][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:33][I][CHK:572]: 2024-05-15 20:29 E1 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:33][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 53 FE FE EC 03 02 01 06 B7
[20:29:34][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 60 6C 02 45 6C F5 EC 01 01 01 00 00 33
[20:29:35][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 61 63 02 45 43 F5 31 FB 45 6C F5 EC 03 01 01 01 8B
[20:29:35][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 08 00 1C 28 02 00 00 48
[20:29:35][I][vista_alarm:947]: Partition: 01
[20:29:35][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'HOUSE '
[20:29:35][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'CHIME,Rdy to Arm'
[20:29:35][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '0'
[20:29:35][I][vista_alarm:971]: Prompt: HOUSE
[20:29:35][I][vista_alarm:972]: Prompt: CHIME,Rdy to Arm
[20:29:35][I][vista_alarm:973]: Beeps: 0
[20:29:35][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state ON
[20:29:35][D][binary_sensor:036]: 'Front Door': Sending state OFF
[20:29:35][D][text_sensor:064]: 'Zone Status (zs)': Sending state ''
[20:29:35][W][component:237]: Component vista_alarm_panel took a long time for an operation (66 ms).
[20:29:35][W][component:238]: Components should block for at most 30 ms.
[20:29:35][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:35][I][CHK:572]: 2024-05-15 20:29 21 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:35][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 54 FE FE EC 03 01 01 01 BC
[20:29:35][D][vista_alarm:748]: Taskupdates free memory: 1240

[20:29:36][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 62 6C 02 45 6C F5 EC 01 01 01 00 00 31
[20:29:36][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 63 63 02 45 43 F5 31 FB 45 6C F5 EC 03 02 01 06 83
[20:29:37][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 01 03 00 28 02 00 00 46
[20:29:37][I][vista_alarm:947]: Partition: 01
[20:29:37][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'FAULT 01 FRONT '
[20:29:37][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'DOOR '
[20:29:37][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '3'
[20:29:37][I][vista_alarm:971]: Prompt: FAULT 01 FRONT
[20:29:37][I][vista_alarm:972]: Prompt: DOOR
[20:29:37][I][vista_alarm:973]: Beeps: 3
[20:29:37][D][binary_sensor:036]: 'Front Door': Sending state ON
[20:29:37][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state OFF
[20:29:37][D][text_sensor:064]: 'Zone Status (zs)': Sending state 'OP:1'
[20:29:37][W][component:237]: Component vista_alarm_panel took a long time for an operation (72 ms).
[20:29:37][W][component:238]: Components should block for at most 30 ms.
[20:29:37][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:37][I][CHK:572]: 2024-05-15 20:29 61 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:37][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 55 FE FE EC 03 02 01 06 B5
[20:29:37][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:37][I][CHK:572]: 2024-05-15 20:29 A1 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:37][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 56 FE EC 01 01 01 00 00 BB
[20:29:38][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:38][I][CHK:572]: 2024-05-15 20:29 E1 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:38][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 57 FE FE EC 03 02 01 06 B3
[20:29:39][I][CMD:572]: 2024-05-15 20:29 F2 12 66 00 00 00 00 64 6C 02 45 6C F5 EC 01 01 01 00 00 2F
[20:29:39][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 08 00 1C 28 02 00 00 48
[20:29:39][I][vista_alarm:947]: Partition: 01
[20:29:39][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'HOUSE '
[20:29:39][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state 'CHIME,Rdy to Arm'
[20:29:39][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '0'
[20:29:39][I][vista_alarm:971]: Prompt: HOUSE
[20:29:39][I][vista_alarm:972]: Prompt: CHIME,Rdy to Arm
[20:29:39][I][vista_alarm:973]: Beeps: 0
[20:29:39][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state ON
[20:29:39][D][binary_sensor:036]: 'Front Door': Sending state OFF
[20:29:39][D][text_sensor:064]: 'Zone Status (zs)': Sending state ''
[20:29:39][W][component:237]: Component vista_alarm_panel took a long time for an operation (117 ms).
[20:29:39][W][component:238]: Components should block for at most 30 ms.
[20:29:39][I][CMD:572]: 2024-05-15 20:29 F2 16 66 00 00 00 00 65 63 02 45 43 F5 31 FB 45 6C F5 EC 03 01 01 01 87
[20:29:39][I][CMD:572]: 2024-05-15 20:29 F6 01 00 00 00 00 00 00 00 00 00 00 00
[20:29:39][I][CHK:572]: 2024-05-15 20:29 21 00 00 00 00 00 00 00 00 00 00 00 90
[20:29:39][I][CMD:572]: 2024-05-15 20:29 F2 0E 02 00 00 00 00 50 FE FE EC 03 01 01 01 C0
[20:29:43][I][CMD:572]: 2024-05-15 20:29 F7 02 00 1D 10 08 00 1C 28 02 00 00 48