aclocal.m4

# generated automatically by aclocal 1.14 -*- Autoconf -*-

# Copyright (C) 1996-2013 Free Software Foundation, Inc.

# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf.  It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])

# Configure paths for GLIB
# Owen Taylor     1997-2001

dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject,
dnl gthread, or gio is specified in MODULES, pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GLIB_2_0],
[dnl 
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(glibtest, [  --disable-glibtest      do not try to compile and run a test GLIB program],
		    , enable_glibtest=yes)

  pkg_config_args=glib-2.0
  for module in . $4
  do
      case "$module" in
         gmodule) 
             pkg_config_args="$pkg_config_args gmodule-2.0"
         ;;
         gmodule-no-export) 
             pkg_config_args="$pkg_config_args gmodule-no-export-2.0"
         ;;
         gobject) 
             pkg_config_args="$pkg_config_args gobject-2.0"
         ;;
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
         gio*) 
             pkg_config_args="$pkg_config_args $module-2.0"
         ;;
      esac
  done

  PKG_PROG_PKG_CONFIG([0.16])

  no_glib=""

  if test "x$PKG_CONFIG" = x ; then
    no_glib=yes
    PKG_CONFIG=no
  fi

  min_glib_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
	  enable_glibtest=no
    fi

    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
	  :
    else
	  no_glib=yes
    fi
  fi

  if test x"$no_glib" = x ; then
    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
    GLIB_COMPILE_RESOURCES=`$PKG_CONFIG --variable=glib_compile_resources gio-2.0`

    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.glibtest
      AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  unsigned int major, minor, micro;
  char *tmp_version;

  fclose (fopen ("conf.glibtest", "w"));

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%u.%u.%u", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%u.%u.%u) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %u.%u.%u. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          ac_save_CFLAGS="$CFLAGS"
          ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GLIB is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     GLIB_GENMARSHAL=""
     GOBJECT_QUERY=""
     GLIB_MKENUMS=""
     GLIB_COMPILE_RESOURCES=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GLIB_CFLAGS)
  AC_SUBST(GLIB_LIBS)
  AC_SUBST(GLIB_GENMARSHAL)
  AC_SUBST(GOBJECT_QUERY)
  AC_SUBST(GLIB_MKENUMS)
  AC_SUBST(GLIB_COMPILE_RESOURCES)
  rm -f conf.glibtest
])

dnl GNOME_CODE_COVERAGE
dnl
dnl Defines CODE_COVERAGE_CFLAGS and CODE_COVERAGE_LDFLAGS which should be
dnl included in the CFLAGS and LIBS/LDFLAGS variables of every build target
dnl (program or library) which should be built with code coverage support.
dnl Also defines GNOME_CODE_COVERAGE_RULES which should be substituted in your
dnl Makefile; and $enable_code_coverage which can be used in subsequent
dnl configure output.
dnl
dnl Note that all optimisation flags in CFLAGS must be disabled when code
dnl coverage is enabled.
dnl
dnl Derived from Makefile.decl in GLib, originally licenced under LGPLv2.1+.
dnl This file is licenced under LGPLv2.1+.
dnl
dnl Usage example:
dnl configure.ac:
dnl    GNOME_CODE_COVERAGE
dnl
dnl Makefile.am:
dnl    @GNOME_CODE_COVERAGE_RULES@
dnl    my_program_LIBS = … $(CODE_COVERAGE_LDFLAGS) …
dnl    my_program_CFLAGS = … $(CODE_COVERAGE_CFLAGS) …
dnl
dnl This results in a “check-code-coverage” rule being added to any Makefile.am
dnl which includes “@GNOME_CODE_COVERAGE_RULES@” (assuming the module has been
dnl configured with --enable-code-coverage). Running `make check-code-coverage`
dnl in that directory will run the module’s test suite (`make check`) and build
dnl a code coverage report detailing the code which was touched, then print the
dnl URI for the report.

AC_DEFUN([GNOME_CODE_COVERAGE],[
	dnl Check for --enable-code-coverage
	AC_MSG_CHECKING([whether to build with code coverage support])
	AC_ARG_ENABLE([code-coverage], AS_HELP_STRING([--enable-code-coverage], [Whether to enable code coverage support]),, enable_code_coverage=no)
	AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes])
	AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
	AC_MSG_RESULT($enable_code_coverage)

	AS_IF([ test "$enable_code_coverage" = "yes" ], [
		dnl Check if gcc is being used
		AS_IF([ test "$GCC" = "no" ], [
			AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
		])

		# List of supported lcov versions.
		lcov_version_list="1.6 1.7 1.8 1.9 1.10"

		AC_CHECK_PROG([LCOV], [lcov], [lcov])
		AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])

		AS_IF([ test "$LCOV" ], [
			AC_CACHE_CHECK([for lcov version], gnome_cv_lcov_version, [
				gnome_cv_lcov_version=invalid
				lcov_version=`$LCOV -v 2>/dev/null | $SED -e 's/^.* //'`
				for lcov_check_version in $lcov_version_list; do
					if test "$lcov_version" = "$lcov_check_version"; then
						gnome_cv_lcov_version="$lcov_check_version (ok)"
					fi
				done
			])
		], [
			lcov_msg="To enable code coverage reporting you must have one of the following lcov versions installed: $lcov_version_list"
			AC_MSG_ERROR([$lcov_msg])
		])

		case $gnome_cv_lcov_version in
			""|invalid[)]
				lcov_msg="You must have one of the following versions of lcov: $lcov_version_list (found: $lcov_version)."
				AC_MSG_ERROR([$lcov_msg])
				LCOV="exit 0;"
			;;
		esac

		AS_IF([ test -z "$GENHTML" ], [
			AC_MSG_ERROR([Could not find genhtml from the lcov package])
		])

		dnl Build the code coverage flags
		CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
		CODE_COVERAGE_LDFLAGS="-lgcov"

		AC_SUBST([CODE_COVERAGE_CFLAGS])
		AC_SUBST([CODE_COVERAGE_LDFLAGS])
	])

GNOME_CODE_COVERAGE_RULES='
# Code coverage
#
# Optional:
#  - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
#    (Default: $(top_builddir))
#  - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
#    by lcov for code coverage. (Default:
#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
#  - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
#    reports to be created. (Default:
#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
#  - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the lcov instance.
#    (Default: empty)
#  - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
#    instance. (Default: empty)
#  - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
#
# The generated report will be titled using the $(PACKAGE_NAME) and
# $(PACKAGE_VERSION). In order to add the current git hash to the title,
# use the git-version-gen script, available online.

# Optional variables
CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
CODE_COVERAGE_LCOV_OPTIONS ?=
CODE_COVERAGE_GENHTML_OPTIONS ?=
CODE_COVERAGE_IGNORE_PATTERN ?=

code_coverage_quiet = $(code_coverage_quiet_$(V))
code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
code_coverage_quiet_0 = --quiet

# Use recursive makes in order to ignore errors during check
check-code-coverage:
ifeq ($(CODE_COVERAGE_ENABLED),yes)
	-$(MAKE) $(AM_MAKEFLAGS) -k check
	$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture
else
	@echo "Need to reconfigure with --enable-code-coverage"
endif

# Capture code coverage data
code-coverage-capture: code-coverage-capture-hook
ifeq ($(CODE_COVERAGE_ENABLED),yes)
	$(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_OPTIONS)
	$(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)"
	-@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp
	LANG=C $(GENHTML) $(code_coverage_quiet) --prefix $(CODE_COVERAGE_DIRECTORY) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
	@echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"
else
	@echo "Need to reconfigure with --enable-code-coverage"
endif

# Hook rule executed before code-coverage-capture, overridable by the user
code-coverage-capture-hook:

ifeq ($(CODE_COVERAGE_ENABLED),yes)
clean: code-coverage-clean
code-coverage-clean:
	-$(LCOV) --directory $(top_builddir) -z
	-rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY)
	-find . -name "*.gcda" -o -name "*.gcov" -delete
endif

GITIGNOREFILES ?=
GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)

DISTCHECK_CONFIGURE_FLAGS ?=
DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage

.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
'

	AC_SUBST([GNOME_CODE_COVERAGE_RULES])
	m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([GNOME_CODE_COVERAGE_RULES])])
])

dnl GLIB_GSETTINGS
dnl Defines GSETTINGS_SCHEMAS_INSTALL which controls whether
dnl the schema should be compiled
dnl

AC_DEFUN([GLIB_GSETTINGS],
[
  m4_pattern_allow([AM_V_GEN])
  AC_ARG_ENABLE(schemas-compile,
                AS_HELP_STRING([--disable-schemas-compile],
                               [Disable regeneration of gschemas.compiled on install]),
                [case ${enableval} in
                  yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE=""  ;;
                  no)  GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;;
                  *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-compile]) ;;
                 esac])
  AC_SUBST([GSETTINGS_DISABLE_SCHEMAS_COMPILE])
  PKG_PROG_PKG_CONFIG([0.16])
  AC_SUBST(gsettingsschemadir, [${datadir}/glib-2.0/schemas])
  if test x$cross_compiling != xyes; then
    GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0`
  else
    AC_PATH_PROG(GLIB_COMPILE_SCHEMAS, glib-compile-schemas)
  fi
  AC_SUBST(GLIB_COMPILE_SCHEMAS)
  if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then
    ifelse([$2],,[AC_MSG_ERROR([glib-compile-schemas not found.])],[$2])
  else
    ifelse([$1],,[:],[$1])
  fi

  GSETTINGS_RULES='
.PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas

mostlyclean-am: clean-gsettings-schemas

gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE))

%.gschema.valid: %.gschema.xml $(gsettings__enum_file)
	$(AM_V_GEN) if test -f "$<"; then d=; else d="$(srcdir)/"; fi; $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$${d}$< && touch [$]@

all-am: $(gsettings_SCHEMAS:.xml=.valid)
uninstall-am: uninstall-gsettings-schemas
install-data-am: install-gsettings-schemas

.SECONDARY: $(gsettings_SCHEMAS)

install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file)
	@$(NORMAL_INSTALL)
	if test -n "$^"; then \
		test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \
		$(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \
		test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \
	fi

uninstall-gsettings-schemas:
	@$(NORMAL_UNINSTALL)
	@list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files
	test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir)

clean-gsettings-schemas:
	rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file)

ifdef gsettings_ENUM_NAMESPACE
$(gsettings__enum_file): $(gsettings_ENUM_FILES)
	$(AM_V_GEN) glib-mkenums --comments '\''<!-- @comment@ -->'\'' --fhead "<schemalist>" --vhead "  <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod "    <value nick='\''@valuenick@'\'' value='\''@valuenum@'\''/>" --vtail "  </@type@>" --ftail "</schemalist>" [$]^ > [$]@.tmp && mv [$]@.tmp [$]@
endif
'
  _GSETTINGS_SUBST(GSETTINGS_RULES)
])

dnl _GSETTINGS_SUBST(VARIABLE)
dnl Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST
AC_DEFUN([_GSETTINGS_SUBST],
[
AC_SUBST([$1])
m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])])
]
)

# nls.m4 serial 5 (gettext-0.18)
dnl Copyright (C) 1995-2003, 2005-2006, 2008-2013 Free Software Foundation,
dnl Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl
dnl This file can can be used in projects which are not available under
dnl the GNU General Public License or the GNU Library General Public
dnl License but which still want to provide support for the GNU gettext
dnl functionality.
dnl Please note that the actual code of the GNU gettext library is covered
dnl by the GNU Library General Public License, and the rest of the GNU
dnl gettext package package is covered by the GNU General Public License.
dnl They are *not* in the public domain.

dnl Authors:
dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.

AC_PREREQ([2.50])

AC_DEFUN([AM_NLS],
[
  AC_MSG_CHECKING([whether NLS is requested])
  dnl Default is enabled NLS
  AC_ARG_ENABLE([nls],
    [  --disable-nls           do not use Native Language Support],
    USE_NLS=$enableval, USE_NLS=yes)
  AC_MSG_RESULT([$USE_NLS])
  AC_SUBST([USE_NLS])
])

# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
# serial 1 (pkg-config-0.24)
# 
# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# PKG_PROG_PKG_CONFIG([MIN-VERSION])
# ----------------------------------
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])

if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
fi
if test -n "$PKG_CONFIG"; then
	_pkg_min_version=m4_default([$1], [0.9.0])
	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
		AC_MSG_RESULT([yes])
	else
		AC_MSG_RESULT([no])
		PKG_CONFIG=""
	fi
fi[]dnl
])# PKG_PROG_PKG_CONFIG

# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
#
# Check to see whether a particular set of modules exists.  Similar
# to PKG_CHECK_MODULES(), but does not set variables or print errors.
#
# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
# only at the first occurence in configure.ac, so if the first place
# it's called might be skipped (such as if it is within an "if", you
# have to call PKG_CHECK_EXISTS manually
# --------------------------------------------------------------
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
  m4_default([$2], [:])
m4_ifvaln([$3], [else
  $3])dnl
fi])

# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
# ---------------------------------------------
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
    pkg_cv_[]$1="$$1"
 elif test -n "$PKG_CONFIG"; then
    PKG_CHECK_EXISTS([$3],
                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
		      test "x$?" != "x0" && pkg_failed=yes ],
		     [pkg_failed=yes])
 else
    pkg_failed=untried
fi[]dnl
])# _PKG_CONFIG

# _PKG_SHORT_ERRORS_SUPPORTED
# -----------------------------
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
        _pkg_short_errors_supported=yes
else
        _pkg_short_errors_supported=no
fi[]dnl
])# _PKG_SHORT_ERRORS_SUPPORTED


# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
# [ACTION-IF-NOT-FOUND])
#
#
# Note that if there is a possibility the first call to
# PKG_CHECK_MODULES might not happen, you should be sure to include an
# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
#
#
# --------------------------------------------------------------
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl

pkg_failed=no
AC_MSG_CHECKING([for $1])

_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])

m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
and $1[]_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.])

if test $pkg_failed = yes; then
   	AC_MSG_RESULT([no])
        _PKG_SHORT_ERRORS_SUPPORTED
        if test $_pkg_short_errors_supported = yes; then
	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
        else 
	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
        fi
	# Put the nasty error message in config.log where it belongs
	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD

	m4_default([$4], [AC_MSG_ERROR(
[Package requirements ($2) were not met:

$$1_PKG_ERRORS

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

_PKG_TEXT])[]dnl
        ])
elif test $pkg_failed = untried; then
     	AC_MSG_RESULT([no])
	m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old.  Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.

_PKG_TEXT

To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
        ])
else
	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
        AC_MSG_RESULT([yes])
	$3
fi[]dnl
])# PKG_CHECK_MODULES


# PKG_INSTALLDIR(DIRECTORY)
# -------------------------
# Substitutes the variable pkgconfigdir as the location where a module
# should install pkg-config .pc files. By default the directory is
# $libdir/pkgconfig, but the default can be changed by passing
# DIRECTORY. The user can override through the --with-pkgconfigdir
# parameter.
AC_DEFUN([PKG_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
m4_pushdef([pkg_description],
    [pkg-config installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([pkgconfigdir],
    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
    [with_pkgconfigdir=]pkg_default)
AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
]) dnl PKG_INSTALLDIR


# PKG_NOARCH_INSTALLDIR(DIRECTORY)
# -------------------------
# Substitutes the variable noarch_pkgconfigdir as the location where a
# module should install arch-independent pkg-config .pc files. By
# default the directory is $datadir/pkgconfig, but the default can be
# changed by passing DIRECTORY. The user can override through the
# --with-noarch-pkgconfigdir parameter.
AC_DEFUN([PKG_NOARCH_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
m4_pushdef([pkg_description],
    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
AC_ARG_WITH([noarch-pkgconfigdir],
    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
    [with_noarch_pkgconfigdir=]pkg_default)
AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
]) dnl PKG_NOARCH_INSTALLDIR

# Copyright (C) 2002-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.14'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version.  Point them to the right macro.
m4_if([$1], [1.14], [],
      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])

# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too.  Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])

# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.14])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])

# AM_CONDITIONAL                                            -*- Autoconf -*-

# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ([2.52])dnl
 m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
  AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.


# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...


# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                    [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named 'D' -- because '-MD' means "put the output
  # in D".
  rm -rf conftest.dir
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir
  # We will build objects and dependencies in a subdirectory because
  # it helps to detect inapplicable dependency modes.  For instance
  # both Tru64's cc and ICC support -MD to output dependencies as a
  # side effect of compilation, but ICC will put the dependencies in
  # the current directory while Tru64 will put them in the object
  # directory.
  mkdir sub

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  am__universal=false
  m4_case([$1], [CC],
    [case " $depcc " in #(
     *\ -arch\ *\ -arch\ *) am__universal=true ;;
     esac],
    [CXX],
    [case " $depcc " in #(
     *\ -arch\ *\ -arch\ *) am__universal=true ;;
     esac])

  for depmode in $am_compiler_list; do
    # Setup a source with many dependencies, because some compilers
    # like to wrap large dependency lists on column 80 (with \), and
    # we should not choose a depcomp mode which is confused by this.
    #
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    : > sub/conftest.c
    for i in 1 2 3 4 5 6; do
      echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
      # Solaris 10 /bin/sh.
      echo '/* dummy */' > sub/conftst$i.h
    done
    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf

    # We check with '-c' and '-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle '-M -o', and we need to detect this.  Also, some Intel
    # versions had trouble with output in subdirs.
    am__obj=sub/conftest.${OBJEXT-o}
    am__minus_obj="-o $am__obj"
    case $depmode in
    gcc)
      # This depmode causes a compiler race in universal mode.
      test "$am__universal" = false || continue
      ;;
    nosideeffect)
      # After this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested.
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
      # This compiler won't grok '-c -o', but also, the minuso test has
      # not run yet.  These depmodes are late enough in the game, and
      # so weak that their functioning should not be impacted.
      am__obj=conftest.${OBJEXT-o}
      am__minus_obj=
      ;;
    none) break ;;
    esac
    if depmode=$depmode \
       source=sub/conftest.c object=$am__obj \
       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
         >/dev/null 2>conftest.err &&
       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      # icc doesn't choke on unknown options, it will just issue warnings
      # or remarks (even with -Werror).  So we grep stderr for any message
      # that says an option was ignored or not supported.
      # When given -MP, icc 7.0 and 7.1 complain thusly:
      #   icc: Command line warning: ignoring option '-M'; no argument required
      # The diagnosis changed in icc 8.0:
      #   icc: Command line remark: option '-MP' not supported
      if (grep 'ignoring option' conftest.err ||
          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
        am_cv_$1_dependencies_compiler_type=$depmode
        break
      fi
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
  test "x$enable_dependency_tracking" != xno \
  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])


# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])


# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
  [--enable-dependency-tracking],
  [do not reject slow dependency extractors])
AS_HELP_STRING(
  [--disable-dependency-tracking],
  [speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
  am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])

# Generate code to set up dependency tracking.              -*- Autoconf -*-

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.


# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
  # Older Autoconf quotes --file arguments for eval, but not when files
  # are listed without --file.  Let's play safe and only enable the eval
  # if we detect the quoting.
  case $CONFIG_FILES in
  *\'*) eval set x "$CONFIG_FILES" ;;
  *)   set x $CONFIG_FILES ;;
  esac
  shift
  for mf
  do
    # Strip MF so we end up with the name of the file.
    mf=`echo "$mf" | sed -e 's/:.*$//'`
    # Check whether this is an Automake generated Makefile or not.
    # We used to match only the files named 'Makefile.in', but
    # some people rename them; so instead we look at the file content.
    # Grep'ing the first line is not enough: some people post-process
    # each Makefile.in and add a new line on top of each file to say so.
    # Grep'ing the whole file is not good either: AIX grep has a line
    # limit of 2048, but all sed's we know have understand at least 4000.
    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
      dirpart=`AS_DIRNAME("$mf")`
    else
      continue
    fi
    # Extract the definition of DEPDIR, am__include, and am__quote
    # from the Makefile without running 'make'.
    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
    test -z "$DEPDIR" && continue
    am__include=`sed -n 's/^am__include = //p' < "$mf"`
    test -z "$am__include" && continue
    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
    # Find all dependency output files, they are included files with
    # $(DEPDIR) in their names.  We invoke sed twice because it is the
    # simplest approach to changing $(DEPDIR) to its actual value in the
    # expansion.
    for file in `sed -n "
      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
      # Make sure the directory exists.
      test -f "$dirpart/$file" && continue
      fdir=`AS_DIRNAME(["$file"])`
      AS_MKDIR_P([$dirpart/$fdir])
      # echo "creating $dirpart/$file"
      echo '# dummy' > "$dirpart/$file"
    done
  done
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS


# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled.  FIXME.  This creates each '.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])

# Do all the work for Automake.                             -*- Autoconf -*-

# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This macro actually does too much.  Some checks are only needed if
# your package does certain things.  But this isn't really a big deal.

dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])
[_AM_PROG_CC_C_O
])

# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out.  PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition.  After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names.  We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
  # is not polluted with repeated "-I."
  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
  # test to see if srcdir already configured
  if test -f $srcdir/config.status; then
    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
  fi
fi

# test whether we have cygpath
if test -z "$CYGPATH_W"; then
  if (cygpath --version) >/dev/null 2>/dev/null; then
    CYGPATH_W='cygpath -w'
  else
    CYGPATH_W=echo
  fi
fi
AC_SUBST([CYGPATH_W])

# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
             [$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
 AC_SUBST([PACKAGE], [$1])dnl
 AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
  [ok:ok],,
  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
 AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
 AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl

# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
AM_MISSING_PROG([AUTOCONF], [autoconf])
AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
AM_MISSING_PROG([AUTOHEADER], [autoheader])
AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility.  To be removed once Automake 1.9.x
# dies out for good.  For more background, see:
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target.  The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
			     [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
		  [_AM_DEPENDENCIES([CC])],
		  [m4_define([AC_PROG_CC],
			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
		  [_AM_DEPENDENCIES([CXX])],
		  [m4_define([AC_PROG_CXX],
			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
		  [_AM_DEPENDENCIES([OBJC])],
		  [m4_define([AC_PROG_OBJC],
			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
		  [_AM_DEPENDENCIES([OBJCXX])],
		  [m4_define([AC_PROG_OBJCXX],
			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
AC_REQUIRE([AM_SILENT_RULES])dnl
dnl The testsuite driver may need to know about EXEEXT, so add the
dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl

# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes.  So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
  cat >&2 <<'END'
Oops!

Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present.  This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>

Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message.  This
can help us improve future automake versions.

END
  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
    echo 'Configuration will proceed anyway, since you have set the' >&2
    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
    echo >&2
  else
    cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.

You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: <http://www.gnu.org/software/coreutils/>.

If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.

END
    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
  fi
fi])

dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])

# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated.  The stamp files are numbered to have different names.

# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $_am_arg | $_am_arg:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh}" != xset; then
  case $am_aux_dir in
  *\ * | *\	*)
    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
  *)
    install_sh="\${SHELL} $am_aux_dir/install-sh"
  esac
fi
AC_SUBST([install_sh])])

# Copyright (C) 2003-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# Check whether the underlying file-system supports filenames
# with a leading dot.  For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
  am__leading_dot=.
else
  am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])

# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
# From Jim Meyering

# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_MAINTAINER_MODE([DEFAULT-MODE])
# ----------------------------------
# Control maintainer-specific portions of Makefiles.
# Default is to disable them, unless 'enable' is passed literally.
# For symmetry, 'disable' may be passed as well.  Anyway, the user
# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
[m4_case(m4_default([$1], [disable]),
       [enable], [m4_define([am_maintainer_other], [disable])],
       [disable], [m4_define([am_maintainer_other], [enable])],
       [m4_define([am_maintainer_other], [enable])
        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
  AC_ARG_ENABLE([maintainer-mode],
    [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
      am_maintainer_other[ make rules and dependencies not useful
      (and sometimes confusing) to the casual installer])],
    [USE_MAINTAINER_MODE=$enableval],
    [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
  MAINT=$MAINTAINER_MODE_TRUE
  AC_SUBST([MAINT])dnl
]
)

# Check to see how 'make' treats includes.	            -*- Autoconf -*-

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
	@echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
  am__include=include
  am__quote=
  _am_result=GNU
  ;;
esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   case `$am_make -s -f confmf 2> /dev/null` in #(
   *the\ am__doit\ target*)
     am__include=.include
     am__quote="\""
     _am_result=BSD
     ;;
   esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])

# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-

# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])

# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it is modern enough.
# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
  case $am_aux_dir in
  *\ * | *\	*)
    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
  *)
    MISSING="\${SHELL} $am_aux_dir/missing" ;;
  esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
  am_missing_run="$MISSING "
else
  am_missing_run=
  AC_MSG_WARN(['missing' script is too old or missing])
fi
])

# Helper functions for option handling.                     -*- Autoconf -*-

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

# _AM_SET_OPTION(NAME)
# --------------------
# Set option NAME.  Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), [1])])

# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_PROG_CC_C_O
# ---------------
# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
# to automatically call this.
AC_DEFUN([_AM_PROG_CC_C_O],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([compile])dnl
AC_LANG_PUSH([C])dnl
AC_CACHE_CHECK(
  [whether $CC understands -c and -o together],
  [am_cv_prog_cc_c_o],
  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
  # Make sure it works both with $CC and with simple cc.
  # Following AC_PROG_CC_C_O, we do the test twice because some
  # compilers refuse to overwrite an existing .o file with -o,
  # though they will create one.
  am_cv_prog_cc_c_o=yes
  for am_i in 1 2; do
    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
         && test -f conftest2.$ac_objext; then
      : OK
    else
      am_cv_prog_cc_c_o=no
      break
    fi
  done
  rm -f core conftest*
  unset am_i])
if test "$am_cv_prog_cc_c_o" != yes; then
   # Losing compiler, so override with the script.
   # FIXME: It is wrong to rewrite CC.
   # But if we don't then we get into trouble of one sort or another.
   # A longer-term fix would be to have automake use am__CC in this case,
   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
   CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])

# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.


# AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# ---------------------------------------------------------------------------
# Adds support for distributing Python modules and packages.  To
# install modules, copy them to $(pythondir), using the python_PYTHON
# automake variable.  To install a package with the same name as the
# automake package, install to $(pkgpythondir), or use the
# pkgpython_PYTHON automake variable.
#
# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
# locations to install python extension modules (shared libraries).
# Another macro is required to find the appropriate flags to compile
# extension modules.
#
# If your package is configured with a different prefix to python,
# users will have to add the install directory to the PYTHONPATH
# environment variable, or create a .pth file (see the python
# documentation for details).
#
# If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will
# cause an error if the version of python installed on the system
# doesn't meet the requirement.  MINIMUM-VERSION should consist of
# numbers and dots only.
AC_DEFUN([AM_PATH_PYTHON],
 [
  dnl Find a Python interpreter.  Python versions prior to 2.0 are not
  dnl supported. (2.0 was released on October 16, 2000).
  m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
[python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 dnl
 python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0])

  AC_ARG_VAR([PYTHON], [the Python interpreter])

  m4_if([$1],[],[
    dnl No version check is needed.
    # Find any Python interpreter.
    if test -z "$PYTHON"; then
      AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
    fi
    am_display_PYTHON=python
  ], [
    dnl A version check is needed.
    if test -n "$PYTHON"; then
      # If the user set $PYTHON, use it and don't search something else.
      AC_MSG_CHECKING([whether $PYTHON version is >= $1])
      AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
			      [AC_MSG_RESULT([yes])],
			      [AC_MSG_RESULT([no])
			       AC_MSG_ERROR([Python interpreter is too old])])
      am_display_PYTHON=$PYTHON
    else
      # Otherwise, try each interpreter until we find one that satisfies
      # VERSION.
      AC_CACHE_CHECK([for a Python interpreter with version >= $1],
	[am_cv_pathless_PYTHON],[
	for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do
	  test "$am_cv_pathless_PYTHON" = none && break
	  AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
	done])
      # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
      if test "$am_cv_pathless_PYTHON" = none; then
	PYTHON=:
      else
        AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
      fi
      am_display_PYTHON=$am_cv_pathless_PYTHON
    fi
  ])

  if test "$PYTHON" = :; then
  dnl Run any user-specified action, or abort.
    m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])
  else

  dnl Query Python for its version number.  Getting [:3] seems to be
  dnl the best way to do this; it's what "site.py" does in the standard
  dnl library.

  AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
    [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
  AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])

  dnl Use the values of $prefix and $exec_prefix for the corresponding
  dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX.  These are made
  dnl distinct variables so they can be overridden if need be.  However,
  dnl general consensus is that you shouldn't need this ability.

  AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
  AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])

  dnl At times (like when building shared libraries) you may want
  dnl to know which OS platform Python thinks this is.

  AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
    [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
  AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])

  # Just factor out some code duplication.
  am_python_setup_sysconfig="\
import sys
# Prefer sysconfig over distutils.sysconfig, for better compatibility
# with python 3.x.  See automake bug#10227.
try:
    import sysconfig
except ImportError:
    can_use_sysconfig = 0
else:
    can_use_sysconfig = 1
# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
# <https://github.com/pypa/virtualenv/issues/118>
try:
    from platform import python_implementation
    if python_implementation() == 'CPython' and sys.version[[:3]] == '2.7':
        can_use_sysconfig = 0
except ImportError:
    pass"

  dnl Set up 4 directories:

  dnl pythondir -- where to install python scripts.  This is the
  dnl   site-packages directory, not the python standard library
  dnl   directory like in previous automake betas.  This behavior
  dnl   is more consistent with lispdir.m4 for example.
  dnl Query distutils for this directory.
  AC_CACHE_CHECK([for $am_display_PYTHON script directory],
    [am_cv_python_pythondir],
    [if test "x$prefix" = xNONE
     then
       am_py_prefix=$ac_default_prefix
     else
       am_py_prefix=$prefix
     fi
     am_cv_python_pythondir=`$PYTHON -c "
$am_python_setup_sysconfig
if can_use_sysconfig:
    sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
else:
    from distutils import sysconfig
    sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
sys.stdout.write(sitedir)"`
     case $am_cv_python_pythondir in
     $am_py_prefix*)
       am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
       am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
       ;;
     *)
       case $am_py_prefix in
         /usr|/System*) ;;
         *)
	  am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
	  ;;
       esac
       ;;
     esac
    ])
  AC_SUBST([pythondir], [$am_cv_python_pythondir])

  dnl pkgpythondir -- $PACKAGE directory under pythondir.  Was
  dnl   PYTHON_SITE_PACKAGE in previous betas, but this naming is
  dnl   more consistent with the rest of automake.

  AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])

  dnl pyexecdir -- directory for installing python extension modules
  dnl   (shared libraries)
  dnl Query distutils for this directory.
  AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
    [am_cv_python_pyexecdir],
    [if test "x$exec_prefix" = xNONE
     then
       am_py_exec_prefix=$am_py_prefix
     else
       am_py_exec_prefix=$exec_prefix
     fi
     am_cv_python_pyexecdir=`$PYTHON -c "
$am_python_setup_sysconfig
if can_use_sysconfig:
    sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
else:
    from distutils import sysconfig
    sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
sys.stdout.write(sitedir)"`
     case $am_cv_python_pyexecdir in
     $am_py_exec_prefix*)
       am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
       am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
       ;;
     *)
       case $am_py_exec_prefix in
         /usr|/System*) ;;
         *)
	   am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
	   ;;
       esac
       ;;
     esac
    ])
  AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])

  dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)

  AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])

  dnl Run any user-specified action.
  $2
  fi

])


# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
# ---------------------------------------------------------------------------
# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.
# Run ACTION-IF-FALSE otherwise.
# This test uses sys.hexversion instead of the string equivalent (first
# word of sys.version), in order to cope with versions such as 2.2c1.
# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000).
AC_DEFUN([AM_PYTHON_CHECK_VERSION],
 [prog="import sys
# split strings by '.' and convert to numeric.  Append some zeros
# because we need at least 4 digits for the hex conversion.
# map returns an iterator in Python 3.0 and a list in 2.x
minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]
minverhex = 0
# xrange is not present in Python 3.0 and range returns an iterator
for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]
sys.exit(sys.hexversion < minverhex)"
  AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   (exit $ac_status); }])

# Check to make sure that the build environment is sane.    -*- Autoconf -*-

# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Reject unsafe characters in $srcdir or the absolute working directory
# name.  Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
  *[[\\\"\#\$\&\'\`$am_lf]]*)
    AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac

# Do 'set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   am_has_slept=no
   for am_try in 1 2; do
     echo "timestamp, slept: $am_has_slept" > conftest.file
     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
     if test "$[*]" = "X"; then
	# -L didn't work.
	set X `ls -t "$srcdir/configure" conftest.file`
     fi
     if test "$[*]" != "X $srcdir/configure conftest.file" \
	&& test "$[*]" != "X conftest.file $srcdir/configure"; then

	# If neither matched, then we have a broken ls.  This can happen
	# if, for instance, CONFIG_SHELL is bash and it inherits a
	# broken ls alias from the environment.  This has actually
	# happened.  Such a system could not be considered "sane".
	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
  alias in your environment])
     fi
     if test "$[2]" = conftest.file || test $am_try -eq 2; then
       break
     fi
     # Just in case.
     sleep 1
     am_has_slept=yes
   done
   test "$[2]" = conftest.file
   )
then
   # Ok.
   :
else
   AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT([yes])
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
  ( sleep 1 ) &
  am_sleep_pid=$!
fi
AC_CONFIG_COMMANDS_PRE(
  [AC_MSG_CHECKING([that generated files are newer than configure])
   if test -n "$am_sleep_pid"; then
     # Hide warnings about reused PIDs.
     wait $am_sleep_pid 2>/dev/null
   fi
   AC_MSG_RESULT([done])])
rm -f conftest.file
])

# Copyright (C) 2009-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
# ("yes" being less verbose, "no" or empty being verbose).
AC_DEFUN([AM_SILENT_RULES],
[AC_ARG_ENABLE([silent-rules], [dnl
AS_HELP_STRING(
  [--enable-silent-rules],
  [less verbose build output (undo: "make V=1")])
AS_HELP_STRING(
  [--disable-silent-rules],
  [verbose build output (undo: "make V=0")])dnl
])
case $enable_silent_rules in @%:@ (((
  yes) AM_DEFAULT_VERBOSITY=0;;
   no) AM_DEFAULT_VERBOSITY=1;;
    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
esac
dnl
dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
dnl do not support nested variable expansions.
dnl See automake bug#9928 and bug#10237.
am_make=${MAKE-make}
AC_CACHE_CHECK([whether $am_make supports nested variables],
   [am_cv_make_support_nested_variables],
   [if AS_ECHO([['TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
	@$(TRUE)
.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
  am_cv_make_support_nested_variables=yes
else
  am_cv_make_support_nested_variables=no
fi])
if test $am_cv_make_support_nested_variables = yes; then
  dnl Using '$V' instead of '$(V)' breaks IRIX make.
  AM_V='$(V)'
  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
  AM_V=$AM_DEFAULT_VERBOSITY
  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AC_SUBST([AM_V])dnl
AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries.  This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip".  However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
  AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])

# Copyright (C) 2006-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])

# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])

# Check how to create a tarball.                            -*- Autoconf -*-

# Copyright (C) 2004-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
#     tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
#     $(am__untar) < result.tar
#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.  Yes, it's still used
# in the wild :-(  We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])

# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'

m4_if([$1], [v7],
  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],

  [m4_case([$1],
    [ustar],
     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
      # There is notably a 21 bits limit for the UID and the GID.  In fact,
      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
      # and bug#13588).
      am_max_uid=2097151 # 2^21 - 1
      am_max_gid=$am_max_uid
      # The $UID and $GID variables are not portable, so we need to resort
      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
      # below are definitely unexpected, so allow the users to see them
      # (that is, avoid stderr redirection).
      am_uid=`id -u || echo unknown`
      am_gid=`id -g || echo unknown`
      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
      if test $am_uid -le $am_max_uid; then
         AC_MSG_RESULT([yes])
      else
         AC_MSG_RESULT([no])
         _am_tools=none
      fi
      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
      if test $am_gid -le $am_max_gid; then
         AC_MSG_RESULT([yes])
      else
        AC_MSG_RESULT([no])
        _am_tools=none
      fi],

  [pax],
    [],

  [m4_fatal([Unknown tar format])])

  AC_MSG_CHECKING([how to create a $1 tar archive])

  # Go ahead even if we have the value already cached.  We do so because we
  # need to set the values for the 'am__tar' and 'am__untar' variables.
  _am_tools=${am_cv_prog_tar_$1-$_am_tools}

  for _am_tool in $_am_tools; do
    case $_am_tool in
    gnutar)
      for _am_tar in tar gnutar gtar; do
        AM_RUN_LOG([$_am_tar --version]) && break
      done
      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
      am__untar="$_am_tar -xf -"
      ;;
    plaintar)
      # Must skip GNU tar: if it does not support --format= it doesn't create
      # ustar tarball either.
      (tar --version) >/dev/null 2>&1 && continue
      am__tar='tar chf - "$$tardir"'
      am__tar_='tar chf - "$tardir"'
      am__untar='tar xf -'
      ;;
    pax)
      am__tar='pax -L -x $1 -w "$$tardir"'
      am__tar_='pax -L -x $1 -w "$tardir"'
      am__untar='pax -r'
      ;;
    cpio)
      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
      am__untar='cpio -i -H $1 -d'
      ;;
    none)
      am__tar=false
      am__tar_=false
      am__untar=false
      ;;
    esac

    # If the value was cached, stop now.  We just wanted to have am__tar
    # and am__untar set.
    test -n "${am_cv_prog_tar_$1}" && break

    # tar/untar a dummy directory, and stop if the command works.
    rm -rf conftest.dir
    mkdir conftest.dir
    echo GrepMe > conftest.dir/file
    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
    rm -rf conftest.dir
    if test -s conftest.tar; then
      AM_RUN_LOG([$am__untar <conftest.tar])
      AM_RUN_LOG([cat conftest.dir/file])
      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
    fi
  done
  rm -rf conftest.dir

  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
  AC_MSG_RESULT([$am_cv_prog_tar_$1])])

AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR

# Autoconf support for the Vala compiler

# Copyright (C) 2008-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# Check whether the Vala compiler exists in $PATH.  If it is found, the
# variable VALAC is set pointing to its absolute path.  Otherwise, it is
# simply set to 'valac'.
# Optionally a minimum release number of the compiler can be requested.
# If the ACTION-IF-FOUND parameter is given, it will be run if a proper
# Vala compiler is found.
# Similarly, if the ACTION-IF-FOUND is given, it will be run if no proper
# Vala compiler is found.  It defaults to simply print a warning about the
# situation, but otherwise proceeding with the configuration.
#
# AM_PROG_VALAC([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# --------------------------------------------------------------------------
AC_DEFUN([AM_PROG_VALAC],
  [AC_PATH_PROG([VALAC], [valac], [valac])
   AS_IF([test "$VALAC" != valac && test -n "$1"],
      [AC_MSG_CHECKING([whether $VALAC is at least version $1])
       am__vala_version=`$VALAC --version | sed 's/Vala  *//'`
       AS_VERSION_COMPARE([$1], ["$am__vala_version"],
         [AC_MSG_RESULT([yes])],
         [AC_MSG_RESULT([yes])],
         [AC_MSG_RESULT([no])
          VALAC=valac])])
    if test "$VALAC" = valac; then
      m4_default([$3],
        [AC_MSG_WARN([no proper vala compiler found])
         AC_MSG_WARN([you will not be able to compile vala source files])])
    else
      m4_default([$2], [:])
    fi])

m4_include([m4/as-compiler-flag.m4])
m4_include([m4/evo_check_langinfo.m4])
m4_include([m4/evo_krb5_support.m4])
m4_include([m4/evo_ldap_check.m4])
m4_include([m4/evo_phonenumber.m4])
m4_include([m4/evo_purify_support.m4])
m4_include([m4/evo_sunldap_check.m4])
m4_include([m4/gtk-doc.m4])
m4_include([m4/intltool.m4])
m4_include([m4/introspection.m4])
m4_include([m4/libtool.m4])
m4_include([m4/ltoptions.m4])
m4_include([m4/ltsugar.m4])
m4_include([m4/ltversion.m4])
m4_include([m4/lt~obsolete.m4])