test_weekly_legacy_3.0.0_comprehensive_v3_chrysalis.cfg

[default]
case = "v3.LR.historical_0051"
constraint = ""
dry_run = "False"
environment_commands = ""
fail_on_dependency_skip = True
# This setting does not support backwards compatibility.
# Its purpose is specifically to call attention to parameters
# that zppy would otherwise just infer, perhaps making an incorrect inference.
# Therefore, it is expected that a user using this setting would want to get an error
# noting new parameters to add explicitly to their cfg.
# infer_path_parameters = False
infer_section_parameters = False
input = /lcrc/group/e3sm2/ac.wlin//E3SMv3/v3.LR.historical_0051
input_subdir = archive/atm/hist
mapping_file = "map_ne30pg2_to_cmip6_180x360_aave.20200201.nc"
output = "/lcrc/group/e3sm/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_output/unique_id/v3.LR.historical_0051"
partition = "debug"
qos = "regular"
www = "/lcrc/group/e3sm/public_html/diagnostic_output/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_www/unique_id"
years = "1985:1989:2",

[climo]
active = True
walltime = "00:30:00"

  [[ atm_monthly_180x360_aave ]]
  frequency = "monthly"
  input_files = "eam.h0"
  input_subdir = "archive/atm/hist"
  vars = ""

  [[ atm_monthly_diurnal_8xdaily_180x360_aave ]]
  active = True
  frequency = "diurnal_8xdaily"
  input_files = "eam.h3"
  input_subdir = "archive/atm/hist"
  vars = "PRECT"

  [[ land_monthly_climo ]]
  active = True
  frequency = "monthly"
  input_files = "elm.h0"
  input_subdir = "archive/lnd/hist"
  mapping_file = "map_r05_to_cmip6_180x360_aave.20231110.nc"
  vars = ""

[ts]
active = True
walltime = "00:30:00"

  [[ atm_monthly_180x360_aave ]]
  frequency = "monthly"
  input_files = "eam.h0"
  input_subdir = "archive/atm/hist"

  [[ atm_daily_180x360_aave ]]
  active = True
  frequency = "daily"
  input_files = "eam.h1"
  input_subdir = "archive/atm/hist"
  vars = "PRECT"

  [[ rof_monthly ]]
  active = True
  extra_vars = 'areatotal2'
  frequency = "monthly"
  input_files = "mosart.h0"
  input_subdir = "archive/rof/hist"
  mapping_file = ""
  vars = "RIVER_DISCHARGE_OVER_LAND_LIQ"

  [[ atm_monthly_glb ]]
  # Note global average won't work for 3D variables.
  active = True
  frequency = "monthly"
  input_files = "eam.h0"
  input_subdir = "archive/atm/hist"
  mapping_file = "glb"
  years = "1985:1995:5",

  [[ lnd_monthly_glb ]]
  active = True
  frequency = "monthly"
  input_files = "elm.h0"
  input_subdir = "archive/lnd/hist"
  mapping_file = "glb"
  vars = "FSH,RH2M,LAISHA,LAISUN,QINTR,QOVER,QRUNOFF,QSOIL,QVEGE,QVEGT,SOILWATER_10CM,TSA,H2OSNO,TOTLITC,CWDC,SOIL1C,SOIL2C,SOIL3C,SOIL4C,WOOD_HARVESTC,TOTVEGC,NBP,GPP,AR,HR"
  years = "1985:1995:5",

  [[ land_monthly ]]
  extra_vars = "landfrac"
  frequency = "monthly"
  input_files = "elm.h0"
  input_subdir = "archive/lnd/hist"
  mapping_file = "map_r05_to_cmip6_180x360_aave.20231110.nc"
  vars = "FSH,RH2M,LAISHA,LAISUN,QINTR,QOVER,QRUNOFF,QSOIL,QVEGE,QVEGT,SOILICE,SOILLIQ,SOILWATER_10CM,TSA,TSOI,H2OSNO,TOTLITC,CWDC,SOIL1C,SOIL2C,SOIL3C,SOIL4C,WOOD_HARVESTC,TOTVEGC,NBP,GPP,AR,HR"

[e3sm_to_cmip]
active = True
frequency = "monthly"
ts_num_years=2
walltime = "00:30:00"

  [[ atm_monthly_180x360_aave ]]
  input_files = "eam.h0"
  ts_subsection = "atm_monthly_180x360_aave"

  [[ land_monthly ]]
  input_files = "elm.h0"
  ts_subsection = "land_monthly"

# TODO: Add "tc_analysis" back in after empty dat is resolved.
# [tc_analysis]
# active = True
# walltime = "00:30:00"

[e3sm_diags]
active = True
climo_diurnal_frequency = "diurnal_8xdaily"
climo_diurnal_subsection = "atm_monthly_diurnal_8xdaily_180x360_aave"
climo_subsection = "atm_monthly_180x360_aave"
environment_commands = "source <INSERT PATH TO CONDA>/conda.sh; conda activate <INSERT ENV NAME>"
grid = '180x360_aave'
multiprocessing = True
num_workers = 8
partition = "compute"
qos = "regular"
ref_final_yr = 1986
ref_start_yr = 1985
ref_years = "1985-1986",
# Include all sets
# min_case_e3sm_diags_depend_on_climo: "lat_lon","zonal_mean_xy","zonal_mean_2d","polar","cosp_histogram","meridional_mean_2d","annual_cycle_zonal_mean","zonal_mean_2d_stratosphere","aerosol_aeronet","aerosol_budget",
# min_case_e3sm_diags_depend_on_ts: "enso_diags","qbo",
# min_case_e3sm_diags_diurnal_cycle: "diurnal_cycle",
# min_case_e3sm_diags_streamflow: "streamflow",
# min_case_e3sm_diags_tc_analysis: "tc_analysis",
# min_case_e3sm_diags_tropical_subseasonal: "tropical_subseasonal",
# TODO: Add "tc_analysis" back in after empty dat is resolved.
# TODO: Add "aerosol_budget" back in once that's working for v3.
sets = "lat_lon","zonal_mean_xy","zonal_mean_2d","polar","cosp_histogram","meridional_mean_2d","annual_cycle_zonal_mean","zonal_mean_2d_stratosphere","enso_diags","qbo","diurnal_cycle","streamflow","tropical_subseasonal","aerosol_aeronet",
short_name = "v3.LR.historical_0051"
ts_daily_subsection = "atm_daily_180x360_aave"
ts_num_years = 2
ts_subsection = "atm_monthly_180x360_aave"
walltime = "5:00:00"
years = "1987:1989:2"
# Reference paths
# Used for mvo and mvm, if ts_num_years is set
obs_ts = "/lcrc/group/e3sm/diagnostics/observations/Atm/time-series/"
# mvo & mvm tc_analysis only
tc_obs = "/lcrc/group/e3sm/diagnostics/observations/Atm/tc-analysis/"

  [[ atm_monthly_180x360_aave ]]
  # Reference paths
  reference_data_path = "/lcrc/group/e3sm/diagnostics/observations/Atm/climatology/"
  # mvo diurnal_cycle only
  dc_obs_climo = '/lcrc/group/e3sm/public_html/e3sm_diags_test_data/unit_test_complete_run/obs/climatology'
  # mvo streamflow only
  streamflow_obs_ts = "/lcrc/group/e3sm/diagnostics/observations/Atm/time-series/"

  [[ atm_monthly_180x360_aave_mvm ]]
  # Test model-vs-model using the same files as the reference
  diff_title = "Difference"
  partition = "compute"
  qos = "regular"
  ref_name = "v3.LR.historical_0051"
  run_type = "model_vs_model"
  short_ref_name = "same simulation"
  swap_test_ref = False
  tag = "model_vs_model"
  ts_num_years_ref = 2
  # Reference paths
  reference_data_path = "/lcrc/group/e3sm/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_output/unique_id/v3.LR.historical_0051/post/atm/180x360_aave/clim"
  # mvm streamflow only
  gauges_path = "/lcrc/group/e3sm/diagnostics/observations/Atm/time-series/GSIM/GSIM_catchment_characteristics_all_1km2.csv"
  reference_data_path_ts_rof = "/lcrc/group/e3sm/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_output/unique_id/v3.LR.historical_0051/post/rof/native/ts/monthly"
  # mvm diurnal_cycle only
  reference_data_path_climo_diurnal = "/lcrc/group/e3sm/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_output/unique_id/v3.LR.historical_0051/post/atm/180x360_aave/clim_diurnal_8xdaily"
  # mvm "enso_diags", "qbo", "area_mean_time_series"
  reference_data_path_ts = "/lcrc/group/e3sm/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_output/unique_id/v3.LR.historical_0051/post/atm/180x360_aave/ts/monthly"
  # mvm tropical_subseasonal only
  reference_data_path_ts_daily = "/lcrc/group/e3sm/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_output/unique_id/v3.LR.historical_0051/post/atm/180x360_aave/ts/daily"

  [[ lnd_monthly_mvm_lnd ]]
  # Test model-vs-model using the same files as the reference
  climo_subsection = "land_monthly_climo"
  diff_title = "Difference"
  partition = "compute"
  qos = "regular"
  ref_name = "v3.LR.historical_0051"
  run_type = "model_vs_model"
  sets = "lat_lon_land",
  short_ref_name = "same simulation"
  swap_test_ref = False
  tag = "model_vs_model"
  ts_num_years_ref = 2
  # Reference paths
  reference_data_path = "/lcrc/group/e3sm/ac.forsyth2/zppy_weekly_legacy_3.0.0_comprehensive_v3_output/unique_id/v3.LR.historical_0051/post/lnd/180x360_aave/clim"


[mpas_analysis]
active = True
anomalyRefYear = 1985
climo_years = "1985-1989", "1990-1995",
enso_years = "1985-1989", "1990-1995",
environment_commands = "source <INSERT PATH TO CONDA>/conda.sh; conda activate <INSERT ENV NAME>"
mesh = "IcoswISC30E3r5"
parallelTaskCount = 6
partition = "compute"
qos = "regular"
shortTermArchive = True
ts_years = "1985-1989", "1985-1995",
walltime = "00:30:00"

[global_time_series]
active = True
climo_years = "1985-1989", "1990-1995",
environment_commands = "source <INSERT PATH TO CONDA>/conda.sh; conda activate <INSERT ENV NAME>"
experiment_name = "v3.LR.historical_0051"
figstr = "v3.LR.historical_0051"
moc_file=mocTimeSeries_1985-1995.nc
plots_lnd = "FSH,RH2M,LAISHA,LAISUN,QINTR,QOVER,QRUNOFF,QSOIL,QVEGE,QVEGT,SOILWATER_10CM,TSA,H2OSNO,TOTLITC,CWDC,SOIL1C,SOIL2C,SOIL3C,SOIL4C,WOOD_HARVESTC,TOTVEGC,NBP,GPP,AR,HR"
ts_num_years = 5
ts_years = "1985-1989", "1985-1995",
walltime = "00:30:00"
years = "1985-1995",

[ilamb]
active = True
e3sm_to_cmip_atm_subsection = "atm_monthly_180x360_aave"
e3sm_to_cmip_land_subsection = "land_monthly"
ilamb_obs = "/lcrc/group/e3sm/diagnostics/ilamb_data"
nodes = 8
partition = "debug"
short_name = "v3.LR.historical_0051"
ts_atm_subsection = "atm_monthly_180x360_aave"
ts_land_subsection = "land_monthly"
ts_num_years = 2
walltime = "2:00:00"
years = "1985:1989:4"