It compiles somehow, but does not start

[thima2017]

Here is my console log:
user@user:/tmp/tmp/auralization_engine_evertims-master/Builds/LinuxMakefile/build$ ./EvertSE
terminate called after throwing an instance of 'std::ios_base::failure[abi:cxx11]'
what(): Failed to open HRIR file: iostream error
Aborted
user@user:/tmp/tmp/auralization_engine_evertims-master/Builds/LinuxMakefile/build$

I've tried to put ClubFritz1_hrir.bin in the same dir with EvertSE file, but it did not help.
I've attached my last Makefile from JUCE:
Makefile.txt

[thima2017]

And I am using Ubuntu 17.10. It has libmysofa-dev 0.6 package and libeigen3-dev 3.3.4 too. Also it has juce-modules-source 4.3.0 package, but it was not adapted well and I've used juce modules (5.1.2) from official juce site. For editing Makefile I used juce-tools 4.3.0 from ubuntu repo.
Before it I used Ubuntu 16.04 LTS with same result.

[PyrApple]

I finally got my hands on a functional Ubuntu install, will check that

[thima2017]

I've ran 'make all test' in libmysofa's build dir and got this:

The following tests FAILED:
1 - CIPIC_subject_003_hrir_final (Failed)
2 - FHK_HRIR_L2354.sofa (Failed)
3 - LISTEN_1002_IRC_1002_C_HRIR.sofa (Failed)
4 - MIT_KEMAR_large_pinna.sofa (Failed)
5 - Pulse (Failed)
6 - Tester (Failed)
7 - TU-Berlin_QU_KEMAR_anechoic_radius_0.5_1_2_3_m.sofa (Failed)
8 - TU-Berlin_QU_KEMAR_anechoic_radius_0.5m.sofa (Failed)
Errors while running CTest

Maybe that is why the issue occurs. (I don't know how it all works, really)

[thima2017]

What distro should I use?
Should I install Linuxbrew?

[thima2017]

I've got how to use strace. EvertES tries to find files in root directory (/). But when I make links in /, the program shows many "Can not locate file" msgboxes anyway. But strace says nothing about it.

I've made following symlinks:
/ClubFritz1_hrir.bin
/hoa2bin_order2_IRC_1008_R_HRIR.bin
/omni.sofa

And I am attaching my last strace file.

strace6-EvertSE.txt

[meguia]

Had exactly the same issue in Ubuntu 17.10 with JUCE 5.2.0 (built from sources) and libmysofa-dev from repo (added -lmysofa in the Makefile).

[thima2017]

I could not compile GPL version of JUCE 5.2.0.
./libs/build_macos.sh with Linuxbrew builds libmysofa only

[thima2017]

Readme file in libmysofa says that they tests libmysofa compilation on Ubuntu 14.04.
Nodejs package is needed to pass libmysofa tests.

[thima2017]

I edited Source/Utils.h and it runs on the linux without errors, as far as I can see.
Utils.h.txt
(Rename it to Utils.h and place over original Utils.h in Source directory.)
Then I created ../data directory from the dir where EvertSE binary was placed. And then I putted all files from auralization_engine_evertims-master/data.
auralization_engine_evertims-master/Builds/LinuxMakefile/data$ ls
ClubFritz1_hrir.bin evertims_logo_512.png impulse.wav
directional.sofa hoa2bin_order2_IRC_1008_R_HRIR.bin omni.sofa
evertims_logo_256.png hoa2bin_order3_IRC_1008_R_HRIR.bin

[thima2017]

EvertSE.jucer.txt
Makefile.txt
(It compiles Debug version by default.)

[thima2017]

But seems it does not work. Just plays a sounds. And I don't know how to test it or tune. Blender shows nothing. There is no tracers or sound effects. What could be wrong?

[thima2017]

It works! And it's a wow program! Thank you very much for your huge work!
What did I use to compile:
Lubuntu 17.10
cmake-gui
https://packages.ubuntu.com/bionic/juce-modules-source
https://packages.ubuntu.com/bionic/juce-tools
galternatives (I added g++ group)
clang++ and clang (Version 4.0. For evertims and libevert. With g++-7 it segfaults on my system)
g++ for auralization_engine (EvertSE)

dev packages that I can remember:
libmysofa-dev
libpng-dev
libjpeg-dev
libeigen3-dev
libresample1-dev (linking to libresample.so gave bad quality. So I added libresample with eigen3 into pkg-config field in Makefile exporter in Projucer)

Also I added symlinks to libevert.so into /usr/lib and /usr/local/lib. Because I compiled and installed it in my userspace.

[thima2017]

Fixes: fix-files.7z.zip
EvertSE.jucer file and Makefile auralization_engine_evertims-master.7z.zip
64-bit binary with data dir: EvertSE.7z.zip

[meguia]

Thanks @thima2017 for the tips. I was able to run the embedded Evertse in Blender, but when I try to start the Raytracing client it says:
...
EVERTimsRaytracingClient._raytracing_process = subprocess.Popen(client_cmd.split(), stdout=subprocess.PIPE, stderr=subprocess.STDOUT, bufsize=1, close_fds=ON_POSIX)
..
PermissionError: [Errno 13] Permission denied.
This happens also with sudo. I suspect that is something related to my evertims installation, but it compiled just fine.

[thima2017]

Anyway, EvertSE segfaults in libc-2.26.so when I try to size up the room in blender. (dmesg message, for example: [ 2002.388871] Juce ALSA[3760]: segfault at 7f68451ebdf0 ip 00007f6879263536 sp 00007f68477fd578 error 4 in libc-2.26.so[7f68791b1000+1d6000])
It's not an evertims failure, definitely. It's something from Blender and/or EvertSE.
When I compile evertims, I do this steps (might be helpful):
I) I compile libevert:

1. I create libevert/build/linux dir
2. I open libevert/CMakeList.txt file by cmake-gui
3. In cmake-gui:
   I point:
   source code dir (evertims-master/libevert)
   build dir (libevert/build/linux)
   Then I press Configure button and point CMAKE_INSTALL_PREFIX, the dir where I'd like make install to. This dir should be on executable file system. For example my home dir is not executable due fstab settings.
   Then I press Configure button again and then Generate.
4. And then I do cd libevert/build/linux and make && make install
5. And then I make symlinks in /usr/lib to CMAKE_INSTALL_PREFIX/lib/libevert.so (probably I should run sudo ldconfig then, but seems it's not needed)

II) I compile evertims:

1. I create evertims/build/linux dir
2. I open evertims/CMakeList.txt file by cmake-gui
3. In cmake-gui:
   I point:
   source code dir (evertims-master/evertims)
   build dir (evertims/build/linux)
   Then I pressed Configure button and pointed CMAKE_INSTALL_PREFIX, the dir where I'd like make install to. This dir should be on executable file system too. And I point evert_DIR (libevert/build/linux).
   Then I press Configure button again and then Generate.
4. And then I do cd evertims/build/linux and make && make install

And after all of this I compile EvertSE. But I already could compile EvertSE after libevert's make && make install.
And when I start evertims I point to ims binary in CMAKE_INSTALL_PREFIX dir, materials.dat in evertims-master/evertims/resources dir and EvertSE binary in auralization_engine_evertims-master/Builds/LinuxMakefile/build directory.