6POS not incrementing correctly in Companion after model upload.

[sande005]

Is there an existing issue for this problem?

• I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Companion

Current Behavior

6POS switch registers pos 3 the same as pos 4 when uploaded from radio.

Expected Behavior

For basic setup, it should increment Mixer in steps of -100, -60, -20, 20, 60, 100

Steps To Reproduce

Create basic model in Companion, using a new radio profile.
Define 6POS as Source for a channel.
In Simulator, note that as switch is incremented, the values for the mixer/outputs change in steps of 40 for each position, as expected. (-100, -60, -20, 20, 60, 100)
Calibrate radio.
Download the model(s) to the radio (Horus X10S-E)
Upload the model(s) back to Companion.
Retest in the Simulator, and note that positions 3 and 4 both report a value of +20, +20, not -20, +20 as expected.

Version

2.11.3

Transmitter

FrSky X10 Express / X10S Express (ACCESS)

Operating System (OS)

Windows

OS Version

Win 11

Anything else?

Found in 2.11.2, still present after update to 2.11.4

6Pos always increments correctly in radio with either version.

Did not have another make/model radio to test with.
Did not test by modifying 6Pos as an Input, or with different weights/diff's

[sande005]

Forgot to note - in the Simulator, when hovering over the selected switch position, a value is reported. It does vary from position to position in equal amounts - so that appears to be correct. Something in how that value is translated to the output result seems to be the issue. Why only with uploaded models is the puzzle.