tests: add test to verify exist/non-exist config in 'show run'

Signed-off-by: Krishnasamy <[email protected]>

Author: krishna-samy

tests/topotests/bgp_peer_group/test_bgp_peer-group.py

@@ -286,6 +286,89 @@ def _check_route_advertisement():
     )
 
 
+def test_bgp_advertise_map_peer_group_config():
+    """
+    Test that advertise-map configurations show correctly in running config
+    when a peer is part of a peer group. Tests both exist-map and non-exist-map.
+    """
+    tgen = get_topogen()
+
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    r1 = tgen.gears["r1"]
+
+    # Create route-maps
+    r1.vtysh_cmd(
+        """
+        configure terminal
+          route-map EXIST-MAP permit 10
+          route-map ADV-MAP permit 10
+        """
+    )
+
+    # First verify the peer is part of a peer group
+    output = r1.vtysh_cmd("show bgp neighbor 192.168.252.2 json")
+    json_output = json.loads(output)
+    assert (
+            "peerGroup" in json_output["192.168.252.2"]
+    ), "Peer is not part of a peer group"
+
+    # Test 1: Configure advertise-map with exist-map
+    r1.vtysh_cmd(
+        """
+        configure terminal
+          router bgp 65001
+            address-family ipv4 unicast
+              neighbor 192.168.252.2 advertise-map ADV-MAP exist-map EXIST-MAP
+        """
+    )
+
+    output = r1.vtysh_cmd("show running-config")
+    exist_map_config = (
+            "neighbor 192.168.252.2 advertise-map ADV-MAP exist-map EXIST-MAP"
+    )
+
+    assert exist_map_config in output, (
+        f"Exist-map configuration not found or incorrect in running config. "
+        f"Expected: '{exist_map_config}'"
+    )
+
+    # Test 2: Configure advertise-map with non-exist-map
+    r1.vtysh_cmd(
+        """
+        configure terminal
+          router bgp 65001
+            address-family ipv4 unicast
+              neighbor 192.168.252.2 advertise-map ADV-MAP non-exist-map EXIST-MAP
+        """
+    )
+
+    output = r1.vtysh_cmd("show running-config")
+    non_exist_map_config = (
+        "neighbor 192.168.252.2 advertise-map ADV-MAP non-exist-map EXIST-MAP"
+    )
+
+    assert non_exist_map_config in output, (
+        f"Non-exist-map configuration not found or incorrect in running config. "
+        f"Expected: '{non_exist_map_config}'"
+    )
+
+    logger.info("exist/non-exist-map configuration correctly shown in running config")
+
+    # cleanup
+    r1.vtysh_cmd(
+        """
+        configure terminal
+          router bgp 65001
+            address-family ipv4 unicast
+              no neighbor 192.168.252.2 advertise-map ADV-MAP non-exist-map EXIST-MAP
+          no route-map EXIST-MAP permit 10
+          no route-map ADV-MAP permit 10
+        """
+    )
+
+
 if __name__ == "__main__":
     args = ["-s"] + sys.argv[1:]
     sys.exit(pytest.main(args))