USB not working after firmware upgrade

[Clyde92]

I'm flashing Marlin firmware on my spider v1.1, and the device is no longer recognised by the computer (windows 10) after firmware flashing with STM32CubeProgrammer. After loading, I'm taking the jumper off to ensure I'm not still in DFU mode and resetting the device.

Please find attached Configuration.h and Configuration_adv.h files.

Configuration_adv.h.txt
Configuration.h.txt

I'm compiling using Platformio as recommended and following the instructions. I've tried both FYSETC_S6 and FYSETC_S6_8000 adjusting bootloader address to 0x08010000 and 0x08008000 depending on the defualt_envs as per the instructions.