The project description says I have to document the HAL. What is part of the HAL? If I write a function called void set_pin_input(gpio, pin) that sets a pin to be a specific input mode, is that part of the HAL?
- Finish Excerpts_STM32_Norris
and read the slides.
- 17/18th
Final versions of block diagram, flow charts, schedule and plan are expected
- 21st
Everything
This openocd -f interface/stlink.cfg -f target/stm32f3x.cfg works.
arm-none-eabi-gdb -q -ex "target remote :3333" $BINARY works.
Use load to flash the chip and continue to start it.
arm-none-eabi-gcc arm-none-eabi-gdb
https://docs.rust-embedded.org/discovery/f3discovery/05-led-roulette/debug-it.html