[Bug]: v0.34.0-d.3 Split Phase Circuit 1&3 randomly Relay Cycle

[ecammit]

What happened?

TL;DR: Linked split phase circuits in v0.34.0-d.3 will have momentary (a few millisecond) power cycling when the lower-numbered circuit in the pair is turned off using this integration. It can be fixed if the lower-numbered circuit is turned off, then turned back on again a few seconds later.

I have a split phase circuit for 1&3. The v0.34.0-d.3 is somehow turning the circuit off, then on a few milliseconds later. Turning the circuit off seems to prevent the cycling.

This shows the continual cycling, except where I turned it off:

Example activity log:

Here's the events for the logs (below) I captured:

Off - 10:29:30 PM
On - 10:29:33 PM

Here is a diagnostic capture that should include that:

config_entry-ef_ble-01KHMRH4D0Y45JR9PEV5P84CDS.json

I've tried restarting HA, reloading the integration, etc.

Only happens with Circuit 1&3.

What version of our software are you running?

v0.34.0-d.3

What device are you seeing the problem on?

SHP2

What bluetooth connection are you using?

USB dongle

Have you changed the integration settings?

Yes (Please write down the changed settings in the next step)

Integration settings (if you changed them)

Update period is 0

I also had Circuit 1 disabled of the Circuit 1&3 split config. I don't think that's an issue, but wanted to call it out. I'm re-testing with circuit 1 enabled now.

Relevant log output

Timing:

Off - 10:29:30 PM
On - 10:29:33 PM

2026-02-28 22:12:27.708 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c0080a5c3008013c400000000620c000000000000000000000000ad0100806544f201081cc8013ee40df73dc20c0a089bdd8ecd06108d946c12640a300000000000007242000000000000a4400000000000200243000000000000014300d0f143000000000080df4200000000123000000000a955503f00000000cf22103e00000000ba7a953f000000001369953f8b128e40000000003622853f00000000'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'a\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:27.725 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a1001c200d3a81608319da54c76c4b66d1afa85fd7ad1d23fb7046f343127d3e318ad120ad1afa25233486cfa3011d8ff606073357c72deb4f6010bd08432a1f56b92444705cce1190a7907b5ed96917a3e43813bbbab9a15ed10790ca69cf3a28b34141eed9280cf49b0197336862591fe733ce0c969eee426ff63e2b10602aacad4eba756a4fb0b8a98572cb711196119e0a43b63da132c739f44f2f0d51e3a655e4c58b6e902b19b4b5f0699790eadea441cfc0b6bf2f9c5b18178225b56f06a750386315e'
2026-02-28 22:12:28.543 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10014200b0300ffdca86f61438401e458e77d249f7e626f39e4cbb906fec9467a2b21b7e93501a54284a75c77c1f2e4d5ead33c52aa39725b7916aa52dbc0ff40c2429db85c1'
2026-02-28 22:12:28.546 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('bfcda590bf3734397ab1a727b6adab35b51db372b46cb6b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xb7\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:28.546 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('bfcda590bf3734397ab1a727b6adab35b51db372b46cb6b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7b7'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xb7\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:28.573 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 9b1a682e8d11a204924d06e4c2ba8f49)
2026-02-28 22:12:28.573 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 6c97360938d51ff76a215166448d21c1)
2026-02-28 22:12:28.573 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 147d92e4b371ebcb05a376abd6b90fb8)
2026-02-28 22:12:28.573 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 5559b400285a478999e0d488a6cea0f9)
2026-02-28 22:12:28.665 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a1001320088a23f1feec24770d5818ac1f1283c4164d5a6f1d4c8f519b58dbd9e7f32ae6526776f8fadfefb8b5a29a1f1856a752aaf84'
2026-02-28 22:12:28.667 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('ff0e31f70e2ecf0e0cdf0e2d'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'/`\xa4\x00', product_id=0x00)
2026-02-28 22:12:28.667 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('ff0e31f70e2ecf0e0cdf0e2d'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'/`\xa4\x00', product_id=0x00)
2026-02-28 22:12:28.744 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10013200739d3d1443e7df74b961b6265e87c7b303615bd6352692d4d727141fd1e7b884151431430640056d714e23d18da7f7294364'
2026-02-28 22:12:28.746 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205088a05054d9c1a1444c20c0b089cdd8ecd06109ffd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'b\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:28.746 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205088a05054d9c1a1444c20c0b089cdd8ecd06109ffd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'b\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:28.747 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
backup_incre_info {
  Energy2_info {
    output_power: 592.415771
  }
}

2026-02-28 22:12:28.748 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205088a05054d9c1a1444c20c0b089cdd8ecd06109ffd8602'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'b\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:28.752 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a10013200c2144e190e357fe72d28824dc94faca15bd2e52d109462e8e4cc81d01e90593f5dcb6a96d80fabb39c303bab78051704e649'
2026-02-28 22:12:29.464 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10012200663df1b8310b404c57155eecc84c50f59459790f095211a886570e6a8cee74db6e37'
2026-02-28 22:12:29.466 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('dc1534'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'4`\xa4\x00', product_id=0x00)
2026-02-28 22:12:29.466 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('dc1534'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'4`\xa4\x00', product_id=0x00)
2026-02-28 22:12:29.532 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10014200b890922ab1cecdf6761efe07c0f6f8e1a4b8552317984ce87de55419f42ba637346425db34a53d12c71b2091fa7e629b9d267691ec6d65ae695d577bbd369780515e'
2026-02-28 22:12:29.535 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('b6c4ac99b63e3d3073b8ae2ebfa4a23cbc14ba7bbd65bfbebebebebebebebebebebebebebebebebebebebe'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xbe\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:29.536 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('b6c4ac99b63e3d3073b8ae2ebfa4a23cbc14ba7bbd65bfbebebebebebebebebebebebebebebebebebebebe'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xbe\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:29.824 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10015200c265ca65672e98ab482fc2c892e08ea90d934857dc3b9e1bf882d539512e52817f518f43859526b37f66e536e651ec046dea79d4eba2907bfec8b1383a64f4cba0adffefcbbba06d72d5ebd9f0fbc2b4cc18'
2026-02-28 22:12:29.828 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089cdd8ecd06108e946c1a280a0cb8c0a5c3c10512c40000000010d807188303a2010708ffe40810d905aa010708ffe40810d807'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'c\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:29.828 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089cdd8ecd06108e946c1a280a0cb8c0a5c3c10512c40000000010d807188303a2010708ffe40810d905aa010708ffe40810d807'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'c\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:29.828 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoTime
backup_info {
  ch_watt: -331.505615
  ch_watt: -584.089905
  ch_watt: 0
  backup_discharge_time: 984
  energy_1 {
    charge_time: 143999
    discharge_time: 729
  }
  energy_2 {
    charge_time: 143999
    discharge_time: 984
  }
}

2026-02-28 22:12:29.828 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089cdd8ecd06108e946c1a280a0cb8c0a5c3c10512c40000000010d807188303a2010708ffe40810d905aa010708ffe40810d807'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'c\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:29.834 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a10015200466fe483f526ae929d4268da463f134959569554e2ceb9ac8a6860c2b12b3f8f0eabcbe8c5d7f502422ba7127b4d279556eb07ec3dfefdbc69c8f18acfb103e3a6a2baa0e7eab4f2d14a81444f2795473cf3'
2026-02-28 22:12:29.960 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10014200415e82b1cea8c46abb9e00c50718e704194717596f0bb8fe1cdc358053917516e11ce198a8c14a24b339e183db498ef806b83b90cd59d37f5a5eda644994f9278351'
2026-02-28 22:12:29.963 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('c20c0b089ddd8ecd0610a0fd86028a050d0a0bf2010328811dd205020800'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'd\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:29.963 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('c20c0b089ddd8ecd0610a0fd86028a050d0a0bf2010328811dd205020800'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'd\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:29.964 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
load_incre_info {
  hall1_incre_info {
    ch1_info {
      load_rly_cnt: 3713
    }
    ch1_sta {
      load_sta: LOAD_CH_POWER_OFF
    }
  }
}

2026-02-28 22:12:29.964 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('c20c0b089ddd8ecd0610a0fd86028a050d0a0bf2010328811dd205020800'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'd\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:29.968 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a10014200b990df9d9e541f6f0f9c1e3ba68058bd8d707c0b7857d773a693c806cc2ca11dffb72e28a6660ffb4a60cb6fe41e63eaf6020d4325d19ba89b423542f2ec8af77805'
2026-02-28 22:12:30.478 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a100142001701accf9a0011a42b984b4ded5e0f1cb0c1c3ef304082bedf0e14c233502715e2528aab766e7b89bf525d3f394ab548cc46a762b484ff280e853b1479934c0e1e5e5a5a1001620008c18635c72a8b15936ad0279e09e857eb8cef2d8d168d78cfdaac1ef9116c781ada769616d89fcc460725943a8f34de3c23c17c75dba6556ab271e62d37ee587b7fd962d6f2b099095b0ed1743269a0017b01f4c668d407d87b4205e647c56160ef'
2026-02-28 22:12:30.484 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('c20c0b089ddd8ecd0610a2fd86028a05130a11f2010328831d820203288913d205020801'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'e\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.485 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c0080a5c3000014c400000000620c000000000000000000000000ad0100002a44f20108ad25043e0043fa3dc20c0a089ddd8ecd06108f946c'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'f\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.485 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('c20c0b089ddd8ecd0610a2fd86028a05130a11f2010328831d820203288913d205020801'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'e\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.486 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
load_incre_info {
  hall1_incre_info {
    ch1_info {
      load_rly_cnt: 3715
    }
    ch3_info {
      load_rly_cnt: 2441
    }
    ch1_sta {
      load_sta: LOAD_CH_POWER_ON
    }
  }
}

2026-02-28 22:12:30.486 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c0080a5c3000014c400000000620c000000000000000000000000ad0100002a44f20108ad25043e0043fa3dc20c0a089ddd8ecd06108f946c'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'f\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.486 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoTime
watt_info {
  ch_watt: -331
  ch_watt: -592
  ch_watt: 0
  all_hall_watt: 680
}

2026-02-28 22:12:30.487 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('c20c0b089ddd8ecd0610a2fd86028a05130a11f2010328831d820203288913d205020801'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'e\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.492 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a1001420019ac3f9dda32c9c25213917a07521d5a6e2b68566171a8f287982a219f454d639b60b923134282102430bc037f105259dc060d1892347dc7f58c78ae6eceb0424bd2'
2026-02-28 22:12:30.493 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c0080a5c3000014c400000000620c000000000000000000000000ad0100002a44f20108ad25043e0043fa3dc20c0a089ddd8ecd06108f946c'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'f\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.499 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a100162007cb169bf5930a14eeb46ab712bdcccd80861165cb8ff6e36bbef2a3497dd216cdad51c94df2d9d738723107fd530576f10bc9c95581eaa5fe11d49ddf90e07b7ddaa6a74277b6f49f3ed969005a2d0a6f3fbd42961d5da56a8cac1ea81d0a8e05e8b'
2026-02-28 22:12:30.532 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10014200ecd7749adeb0afd01d40a5e57446ae2379ce6dc6c0030b50816f2c5b8e9484391391d254d4fc4595d41aa8ad813742fa2b0c16cd21f3001ebcad4569ea627145a172'
2026-02-28 22:12:30.536 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('ccbed6e3cc44474a09c2d454c5ded846c66ec001c71fc5c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xc4\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:30.536 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('ccbed6e3cc44474a09c2d454c5ded846c66ec001c71fc5c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4c4'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xc4\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:30.983 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '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'
2026-02-28 22:12:30.995 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('82055f8205054d17b840438a05054df4a3ab43a2062e5d0000f0416a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019b00101aa061b5d0000f0416a110802100118012801307f388080a00b4019b00101c20c0b089edd8ecd0610a6fd86028a05180a16f2010328851d820203288b13d205020800e205020800'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'g\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.995 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089edd8ecd061090946c12640a300000000000806e4200000000000080400000000000400143000000000020014300a07043000000000080ef4200000000123000000000438c4e3f0000000053740e3e000000003461963f000000002a96963f7fd906400000000013c18f3f00000000'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'h\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.995 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('82055f8205054d17b840438a05054df4a3ab43a2062e5d0000f0416a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019b00101aa061b5d0000f0416a110802100118012801307f388080a00b4019b00101c20c0b089edd8ecd0610a6fd86028a05180a16f2010328851d820203288b13d205020800e205020800'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'g\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.996 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
backup_incre_info {
  Energy1_info {
    output_power: 192.719101
  }
  Energy2_info {
    output_power: 343.280884
  }
}
load_incre_info {
  hall1_incre_info {
    ch1_info {
      load_rly_cnt: 3717
    }
    ch3_info {
      load_rly_cnt: 2443
    }
    ch1_sta {
      load_sta: LOAD_CH_POWER_OFF
    }
    ch3_sta {
      load_sta: LOAD_CH_POWER_OFF
    }
  }
}

2026-02-28 22:12:30.997 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089edd8ecd061090946c12640a300000000000806e4200000000000080400000000000400143000000000020014300a07043000000000080ef4200000000123000000000438c4e3f0000000053740e3e000000003461963f000000002a96963f7fd906400000000013c18f3f00000000'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'h\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:30.997 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoTime
load_info {
  hall1_watt: 0
  hall1_watt: 59.625
  hall1_watt: 0
  hall1_watt: 4
  hall1_watt: 0
  hall1_watt: 129.25
  hall1_watt: 0
  hall1_watt: 129.125
  hall1_watt: 240.625
  hall1_watt: 0
  hall1_watt: 119.75
  hall1_watt: 0
  hall1_curr: 0
  hall1_curr: 0.806827724
  hall1_curr: 0
  hall1_curr: 0.139115617
  hall1_curr: 0
  hall1_curr: 1.1748414
  hall1_curr: 0
  hall1_curr: 1.17645764
  hall1_curr: 2.10702491
  hall1_curr: 0
  hall1_curr: 1.12307966
  hall1_curr: 0
}

2026-02-28 22:12:30.999 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('82055f8205054d17b840438a05054df4a3ab43a2062e5d0000f0416a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019b00101aa061b5d0000f0416a110802100118012801307f388080a00b4019b00101c20c0b089edd8ecd0610a6fd86028a05180a16f2010328851d820203288b13d205020800e205020800'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'g\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:31.015 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a1001a200449125c043089125b06eeb44842629b178dd0b76306df314000a5ebec7be69db168fee8da5e1000632b9ad6fbc12e141578079b82e54d45f837ad42abf4db6d32f5cdb0aa11cc18627cf4ce8d39482be629584ea5aaf18bb6500f84f0783c5083a5f82fe1dbdde7d7b10325cbd223f1e9d2b5f0f1601ad1c593ef2a2dbce06e9c37042e8547bca093529c42267c9bdf72f18cb320822c46a6c9f0f2f403aafcf8d38'
2026-02-28 22:12:31.023 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089edd8ecd061090946c12640a300000000000806e4200000000000080400000000000400143000000000020014300a07043000000000080ef4200000000123000000000438c4e3f0000000053740e3e000000003461963f000000002a96963f7fd906400000000013c18f3f00000000'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'h\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:31.032 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a1001920056419e38b6ff60e6df9ad888018c7a335bc444bc1115523fe74c1ee99c2b28d4ef0653d1033d1c2da41d34e066dbe7027517b9f5a30a1a71d988be97de57b22f3bd8afc27844d3ef6a02e74e17821eca22dd1efe91f98864e04c359e022a579f394bd1746be0ce0516743f99530654d9bdf0c5769f15f2f93e79a5b5cf5c4124265bfddcf9cf7cb17214e527f725f426509f'
2026-02-28 22:12:31.514 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a100142008ffee3212b625788b42d9898ad28e820a9dfca11483fb6d22c775b64e6d85ac1419639ff97c96e83c2d58fd52db6377999a78502a3bcbd918fd4b95de8d1a9309384'
2026-02-28 22:12:31.517 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('c4b6deebc44c4f4201cadc5ccdd6d04ece66c809cf17cdcccccccccccccccccccccccccccccccccccccccc'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xcc\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:31.517 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('c4b6deebc44c4f4201cadc5ccdd6d04ece66c809cf17cdcccccccccccccccccccccccccccccccccccccccc'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xcc\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:31.760 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a1001a200df615789cbced9d32c705f7486f18edd587e677e461ba34df288add0ea3a2915615a646a94d4d901c5403285ab7199bf81d4a9bbc5e1e3c73e2f58eefc9a24bafbd60a83b6ab944da4a75969d3ecd37e1b571819acfe4859ff07410b1ed29189178b2f72f481745b9872b59b147f51542c1833611caa11c3bdfcce45095f557ca36e0a2f060322c10c3e428c59b86a1ddf4faaa84221ccb2a9c71cf3ad72cc36cca9'
2026-02-28 22:12:31.767 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205548205054d308739438a05054d683ca543aa061372110802100118012801307f388080a00b4019b2062b5d0000f0416a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019c20c0b089fdd8ecd0610abfd86028a05180a16f2010328861d820203288c13d205020801e205020801'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'i\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:31.767 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205548205054d308739438a05054d683ca543aa061372110802100118012801307f388080a00b4019b2062b5d0000f0416a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019c20c0b089fdd8ecd0610abfd86028a05180a16f2010328861d820203288c13d205020801e205020801'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'i\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:31.768 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
backup_incre_info {
  Energy1_info {
    output_power: 185.528076
  }
  Energy2_info {
    output_power: 330.471924
  }
}
load_incre_info {
  hall1_incre_info {
    ch1_info {
      load_rly_cnt: 3718
    }
    ch3_info {
      load_rly_cnt: 2444
    }
    ch1_sta {
      load_sta: LOAD_CH_POWER_ON
    }
    ch3_sta {
      load_sta: LOAD_CH_POWER_ON
    }
  }
}

2026-02-28 22:12:31.769 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205548205054d308739438a05054d683ca543aa061372110802100118012801307f388080a00b4019b2062b5d0000f0416a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019c20c0b089fdd8ecd0610abfd86028a05180a16f2010328861d820203288c13d205020801e205020801'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'i\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:31.783 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a1001a2003a00a308deaa7c163b62f560ed6b6eb4c57e18cd26fd33981e0b2fe9cdd14efda08059c3422b799d28fde2a9147f6ce80def5a3a5346887bf24702c8365d5aae725e6ca67d695b92873b506a418dc238f7da4ad578591fb1eec9269d4b282ae35564803afb034a3e92eb464392c39ad9edcdb2e4f5a071cf48904d905be3fc7a22fbc48517aca13b0578c85807cf47713aacb6da15744c3a2f05454b930ca935e309'
2026-02-28 22:12:32.008 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a1001320061ede38a2ac12f536077014314d7d56e4ec4341268b9475580c9929a5a15e6a90f86d99fedd901f081094c75d4872428a7c5'
2026-02-28 22:12:32.010 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('996857916848a9686ab9684b'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'I`\xa4\x00', product_id=0x00)
2026-02-28 22:12:32.011 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('996857916848a9686ab9684b'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'I`\xa4\x00', product_id=0x00)
2026-02-28 22:12:32.524 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10014200770440b6b5f98a1523f3b432d6895bd1f24350df922a13b3de73c195f12b9783697178d14f3cab22aeb60b8bff87b2826db0c841acccfd5de7bbc14b8952d45f68f8'
2026-02-28 22:12:32.527 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('daa8c0f5da52515c1fd4c242d3c8ce50d078d617d10ed3d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xd2\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:32.527 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('daa8c0f5da52515c1fd4c242d3c8ce50d078d617d10ed3d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2d2'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xd2\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:32.659 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a100122007a5d825687540bcb91a403861a03672f805c896c5bf3ce30dfb1983e9783045dcfd2'
2026-02-28 22:12:32.661 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('a36a4b'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'K`\xa4\x00', product_id=0x00)
2026-02-28 22:12:32.661 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('a36a4b'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'K`\xa4\x00', product_id=0x00)
2026-02-28 22:12:32.794 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10015200f511dd0dd71bfbd5cac10eb198837d4fff77d27a097e6643257e8b46ffe8f030628dea5efacf0a35f07571006e8571e5ae86d4efe272f77f80d2f8c06d676b68c0905f7915cf378a03f7b5a45313113d6d3b'
2026-02-28 22:12:32.797 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089fdd8ecd061091946c1a280a0c17b840c3f4a3abc30000000010c70d188303a2010708ffe40810d905aa010708ffe40810c70d'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'j\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:32.797 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089fdd8ecd061091946c1a280a0c17b840c3f4a3abc30000000010c70d188303a2010708ffe40810d905aa010708ffe40810c70d'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'j\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:32.798 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoTime
backup_info {
  ch_watt: -192.719101
  ch_watt: -343.280884
  ch_watt: 0
  backup_discharge_time: 1735
  energy_1 {
    charge_time: 143999
    discharge_time: 729
  }
  energy_2 {
    charge_time: 143999
    discharge_time: 1735
  }
}

2026-02-28 22:12:32.798 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a089fdd8ecd061091946c1a280a0c17b840c3f4a3abc30000000010c70d188303a2010708ffe40810d905aa010708ffe40810c70d'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'j\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:32.804 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a10015200c18607c5789c20132b5f0755134aaa0257d2082794f4b8dc037f6647afea45c0e3b0f26b977ab534bf4001c6603e595509941f53ccbc939ecd9b4c3c9cf07a4138d2c4845cd205aa4a205be4098884ba88a6'
2026-02-28 22:12:33.526 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a100142007a2f86d07da3c86581e3803439f2f5a012ded1a238d6a2aaa53552ee923af007953844d5db664499a1fa5e52ecf8df6177aa39291964d68e4869951fdf8492d0dbc4'
2026-02-28 22:12:33.530 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('d0a2caffd0585b5615dec848d9c2c45ada72dc1ddb04d9d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xd8\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:33.530 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('d0a2caffd0585b5615dec848d9c2c45ada72dc1ddb04d9d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8d8'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xd8\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:33.548 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a1001620018a3c11b28083b1da7edd491b1a554bb38bb0016569f0f4a062c36c75679fc13b37d1c155e927323de68be036e2b2c0d8a1ff148c0d35c902850b0c0ca76c7e4b400e6edc290b77957a22e72ac170f88f39e5fe0181b9c02804a051eb23a1ef3b1ff'
2026-02-28 22:12:33.552 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c000039c30000a5c300000000620c000000000000000000000000ad0100400144f201082c97053e6b22f73dc20c0a08a0dd8ecd061092946c'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'k\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:33.552 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c000039c30000a5c300000000620c000000000000000000000000ad0100400144f201082c97053e6b22f73dc20c0a08a0dd8ecd061092946c'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'k\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:33.552 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoTime
watt_info {
  ch_watt: -185
  ch_watt: -330
  ch_watt: 0
  all_hall_watt: 517
}

2026-02-28 22:12:33.553 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c000039c30000a5c300000000620c000000000000000000000000ad0100400144f201082c97053e6b22f73dc20c0a08a0dd8ecd061092946c'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'k\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:33.559 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a100162003b053de572627a67ac60a9602dde3716437f07493d4aaa454f53828ef7c452e8a14aa8ee4ab4df21be3621a0d45dda85858938959fdcbefabe7996f4309b4a7765a31fbaa89f64acf3666152123489060d685c33227f521c11355ecf3a9709b7646f'
2026-02-28 22:12:33.575 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 9b1a682e8d11a204924d06e4c2ba8f49)
2026-02-28 22:12:33.576 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 6c97360938d51ff76a215166448d21c1)
2026-02-28 22:12:33.576 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 147d92e4b371ebcb05a376abd6b90fb8)
2026-02-28 22:12:33.576 WARNING (MainThread) [custom_components.device_tools] [Peter Panel BLE] Removing unknown entity (id: 5559b400285a478999e0d488a6cea0f9)
2026-02-28 22:12:34.549 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10014200c876fddefb4f29f8298cbf374831ebdd3560191a27d0b921e053a48617d2b69de1a172c8899f66d064ae52a26ce347ff8cefc2231b9c5033510fd7449588bac42b7a'
2026-02-28 22:12:34.552 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('d6a4ccf9d65e5d5013d8ce4edfc4c25cdc74da1bdd02dfdededededededededededededededededededede'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xde\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:34.552 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('d6a4ccf9d65e5d5013d8ce4edfc4c25cdc74da1bdd02dfdededededededededededededededededededede'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xde\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:34.629 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10019200701fb50409ebe63bc2db372ba7c3499584c093a7b9cc0e97d8dcc7ffa69782adcf04f4e6e4d03d1276d198357ad6637d81e69009440f6ff5836ca19b02e9efb9bb7b09c3d8a3bdf6e4ecae62cf509ffe5394dc74248aecb115e443be8afffbd41c6fe0be27ad0d2ea272d9366a4c7c53ce87044d915e05f0d4810897b508ceede109040bf01a3c357c8bf43662745d6318d1'
2026-02-28 22:12:34.634 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a08a1dd8ecd061093946c12640a300000000000006b4200000000000026410000000000800143000000000000014300809842000000000000e64200000000123000000000c1364d3f00000000cd22103e000000009263943f000000007834953fc7e79f3f000000006bfa893f00000000'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'l\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:34.634 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a08a1dd8ecd061093946c12640a300000000000006b4200000000000026410000000000800143000000000000014300809842000000000000e64200000000123000000000c1364d3f00000000cd22103e000000009263943f000000007834953fc7e79f3f000000006bfa893f00000000'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'l\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:34.635 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoTime
load_info {
  hall1_watt: 0
  hall1_watt: 58.75
  hall1_watt: 0
  hall1_watt: 10.375
  hall1_watt: 0
  hall1_watt: 129.5
  hall1_watt: 0
  hall1_watt: 129
  hall1_watt: 76.25
  hall1_watt: 0
  hall1_watt: 115
  hall1_watt: 0
  hall1_curr: 0
  hall1_curr: 0.801616728
  hall1_curr: 0
  hall1_curr: 0.140757754
  hall1_curr: 0
  hall1_curr: 1.15928864
  hall1_curr: 0
  hall1_curr: 1.16566372
  hall1_curr: 1.24926078
  hall1_curr: 0
  hall1_curr: 1.07795465
  hall1_curr: 0
}

2026-02-28 22:12:34.636 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a08a1dd8ecd061093946c12640a300000000000006b4200000000000026410000000000800143000000000000014300809842000000000000e64200000000123000000000c1364d3f00000000cd22103e000000009263943f000000007834953fc7e79f3f000000006bfa893f00000000'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'l\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:34.648 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a100192003de4785139a8453495a8db0ae52916e20886cd28ca54222b1729dd3d36390e791162aeabd361c34352f3212f6b607b68532a349aae53534a7abebbd63c9361a2ed18b60706da16cf66ff8dc5882b9196c3414cad085451c842c1a3144f7db112ec0c0dd5e4616388298271c8437ca535a15d113c56e33bdb62674ba7f370f796bd4ba4bc64298d7bab33efb64485f27669db'
2026-02-28 22:12:35.079 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a100132006e18771cdd7b4b9141e16d2f40296245e6bf97ca38e77bbe3983061faaa89485155ff60fa99f45bbc91f187f08543860303a'
2026-02-28 22:12:35.081 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('85744b8d7454b57476a57457'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'U`\xa4\x00', product_id=0x00)
2026-02-28 22:12:35.082 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('85744b8d7454b57476a57457'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'U`\xa4\x00', product_id=0x00)
2026-02-28 22:12:35.360 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a1001520088a826b1b2ed9fa793465de2071c54eb7b7d74f22f0801394af5402b907f1172b2eee060930097b4abbce3ce0bc343bfd34cbe60b4ce41f5f2b2e7c08cd4fdb06ab37f2e8a1f97af8af94b58d610b6f5c3ff'
2026-02-28 22:12:35.363 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a08a2dd8ecd061094946c1a280a0c308739c3683ca5c30000000010c70d188303a2010708ffe40810a206aa010708ffe40810c70d'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'm\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:35.364 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a08a2dd8ecd061094946c1a280a0c308739c3683ca5c30000000010c70d188303a2010708ffe40810a206aa010708ffe40810c70d'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'm\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:35.364 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoTime
backup_info {
  ch_watt: -185.528076
  ch_watt: -330.471924
  ch_watt: 0
  backup_discharge_time: 1735
  energy_1 {
    charge_time: 143999
    discharge_time: 802
  }
  energy_2 {
    charge_time: 143999
    discharge_time: 1735
  }
}

2026-02-28 22:12:35.365 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('c20c0a08a2dd8ecd061094946c1a280a0c308739c3683ca5c30000000010c70d188303a2010708ffe40810a206aa010708ffe40810c70d'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'm\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:35.370 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a100152006ce945b5091057f212869efe8c87378f4771df206ea65397971587228cc6db207d80ce8a0f84fcfb5f62cf9df67ac72e8a4d331d7dafdecae374c0abe8863f05b7e993f37cf728efca8675b523fdbb8d57d6'
2026-02-28 22:12:35.539 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10014200f659b1f49939574a318d033f05f0973942f94954e8845f8ddaaded34a6c3c057c9495de162055f4c2daf14695786e3fe5d731886229d55fee2f155d7714693683844'
2026-02-28 22:12:35.542 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('eb99f1c4eb63606d2ee5f373e2f9ff61e149e726e03fe2e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xe3\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:35.542 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('eb99f1c4eb63606d2ee5f373e2f9ff61e149e726e03fe2e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3e3'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xe3\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:35.865 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10012200054ec5dc9e73f5be2dd1c14e6efe27bf6683e392c2bdf109e17986cbbbeedf8bf0f3'
2026-02-28 22:12:35.868 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('b17859'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'Y`\xa4\x00', product_id=0x00)
2026-02-28 22:12:35.868 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0B, dst=0x21, cmd_set=0xFE, cmd_id=0x15, payload=bytes.fromhex('b17859'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'Y`\xa4\x00', product_id=0x00)
2026-02-28 22:12:35.945 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10017200c64aa482f6095f13ac97072839a59ec5cc17b6ab62fe989bcc20f3a8161132fdfcb7a4a32207391668f17e9caf47fb079dcc470f18405e82fcee2529f8c07524208986f6553e8255ca8f1368271a3603e6a95683e3cb0abdc7adf02274b98028a006dfa375ddd316fa11d6f47bdbb80d3ff0'
2026-02-28 22:12:35.950 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('820547a20644080010001a002000280030003d0000000045000000004d000000005d0000f04165000000006a110802100118012801307f388080a00b4019a00100a80100b00101b80100c20c0b08a3dd8ecd0610acfd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'n\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:35.950 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('820547a20644080010001a002000280030003d0000000045000000004d000000005d0000f04165000000006a110802100118012801307f388080a00b4019a00100a80100b00101b80100c20c0b08a3dd8ecd0610acfd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'n\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:35.951 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
backup_incre_info {
}

2026-02-28 22:12:35.951 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('820547a20644080010001a002000280030003d0000000045000000004d000000005d0000f04165000000006a110802100118012801307f388080a00b4019a00100a80100b00101b80100c20c0b08a3dd8ecd0610acfd8602'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'n\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:35.961 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a10017200b2a80b12de6c31ddfd80b805f7526ee6bbec959b3d371055a3827b46b6381631e72fe4a4b0c610ae9d0dec5a8cceec8228867d1e2d36c05e93361344acb119576fecf923b677284d38568aab2c2030800aa7f6af054d9b1e7db871eea4219cb407a4eca829ca24b0798dcfef67bd1133f3a0'
2026-02-28 22:12:36.496 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a10018200c449e047f1e4647388be823c3357578e54157a0251acc5be77a8a04e5e01f9d40d80e68e287b83a448509c0e535870f3ed1de0a73748ab4189b46afd764cb4041aedd290cccb60f198f6dcacab904c5c23ae6a1012863474951a3702799988dbd730c79f1d0930e9a0abf0c445c10b60c2d46c68d85506305b08f6c42d5e9956266b'
2026-02-28 22:12:36.501 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('82054ba2061672110802100118012801307f388080a00b4019c00100aa06296a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019c00100b20603c00100c20c0b08a3dd8ecd0610b1fd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'o\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:36.501 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('82054ba2061672110802100118012801307f388080a00b4019c00100aa06296a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019c00100b20603c00100c20c0b08a3dd8ecd0610b1fd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'o\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:36.502 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
backup_incre_info {
}

2026-02-28 22:12:36.502 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending packet: Packet(src=0x21, dst=0x0B, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('82054ba2061672110802100118012801307f388080a00b4019c00100aa06296a110802100118012801307f388080a00b401972110802100118012801307f388080a00b4019c00100b20603c00100c20c0b08a3dd8ecd0610b1fd8602'), dsrc=0x01, ddst=0x01, version=0x13, seq=b'o\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:36.512 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Sending: '5a5a100182008d9e51c1d63209fc420c9fa8700fea1ebb283b7a0510d88b5dee33005a8162b0e4cf09bec97eb3ea2523183fa885f5d46465c692a075343c5960cf733b47992b823b7f4135a915d5f01589fe80d32d526194df3d22861f6c75e350fbcb10a992ffb0f3a01a19aa6f3c5a77e4f167dc4b1d317371950916e71427f6a5b184ebfee7c0'
2026-02-28 22:12:36.573 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '5a5a1001420049ec77b65a3d7d710391922e3bcf10f633f81eba7ae8b397eb4d042026af73dec89914b3b1c6fc6576c34115ee3707d3c4ece8f6d9b44d70b935f1018b2ea4bb30d8'
2026-02-28 22:12:36.576 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('e391f9cce36b686526edfb7beaf1f769e941ef2ee837eaebebebebebebebebebebebebebebebebebebebeb'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xeb\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:36.576 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] listenForDataHandler: Packet(src=0x0C, dst=0x21, cmd_set=0xFE, cmd_id=0x20, payload=bytes.fromhex('e391f9cce36b686526edfb7beaf1f769e941ef2ee837eaebebebebebebebebebebebebebebebebebebebeb'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'\xeb\xa9\xf5\x00', product_id=0x00)
2026-02-28 22:12:37.005 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] parseEncPackets: Data: '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'
2026-02-28 22:12:37.013 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205108205054d5ef73a438a05054d5084a643c20c0b08a4dd8ecd0610b5fd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'p\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:37.013 DEBUG (MainThread) [custom_components.ef_ble.eflib.connection - 8C:4F:**:**:**] Parsed packet: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x01, payload=bytes.fromhex('222d5a0c000039c30000a5c300000000620c000000000000000000000000ad010080ff43f20108fb95033e80d1f83dc20c0a08a4dd8ecd061096946c12640a3000000000008067420000000000002c4100000000008001430000000000a0014300408e420000000000c0f6420000000012300000000048f44a3f000000008b3a133e00000000d32e943f00000000cc38963f08b89d3f0000000020ca973f00000000'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'q\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:37.014 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] 8C:4F:**:**:**: EF-HD30646: Parsed data: Packet(src=0x0B, dst=0x21, cmd_set=0x0C, cmd_id=0x20, payload=bytes.fromhex('8205108205054d5ef73a438a05054d5084a643c20c0b08a4dd8ecd0610b5fd8602'), dsrc=0x01, ddst=0x00, version=0x13, seq=b'p\x02\x00\x00', product_id=0x00)
2026-02-28 22:12:37.014 DEBUG (MainThread) [custom_components.ef_ble.eflib.devices.shp2 - 8C:4F:**:**:**] Message from Smart Home Panel 2, type: pd303.ProtoPushAndSet
backup_incre_info {
  Energy1_info {
    output_power: 186.966278
  }
  Energy2_info {
    output_power: 333.033691
  }
}

[ecammit]

I mainly just wanted to get this on the radar in case it's a legit issue with how v0.34.0-d.3 is sending commands. Short cycling relays could lead to hardware failure. It's entirely possible I have defective hardware that's been doing this but I hadn't noticed until now.

My next steps are:

• Determine if Circuit 1 is enabled changes anything (unlikely).
• Disable this BLE integration entirely and see if it stops the relay cycling by listening for clicking from the panel (may take some time)

At least I captured logs of it happening in case there is anything to be found from that.

I definitely do not have any automations or triggers that would be causing this. After all, I just added this integration... specifically v0.34.0-d.3, so nothing should be targeting the new circuit switch entities.

[GnoX]

Wait, is it actually switching those circuits or is it just a display bug? In the logs you posted, there are no circuit control commands actually being sent, it's only sending ping replies to keep the comms going.

I didn't actually implement anything related to shp2, it's all work by rabits and those circuit controls was also not my work, I only took it over to clean it up from another MR. It'll check if the implementation is the same as in the app.

[ecammit]

It was switching those circuits.

After doing some testing this morning, I think it may be an issue with my SHP2's relay. I did a full power cycle on the panel just to see.

Looking at the logs I posted, the relay counts on the circuits are:

    ch1_info {
      load_rly_cnt: 3718
    }
    ch3_info {
      load_rly_cnt: 2444
    }

So I'm going to guess it's an issue with circuit 1 on the panel and that because I tied it together with circuit 3 later it started cycling them both. There's no way anyone's relay count for their circuits should be in the multiple thousands.

I'll close this comment. It was doing it regardless of this integration being used. Thanks for looking at the packets, however.

[ecammit]

I unlinked circuits 1 & 3 so they are no longer split-phase. Once I did that, I noticed that the state of circuit 1 was off, but circuit 3 was on. I'm monitoring now to see if either circuit cycles, but so far nothing.

I think that perhaps the split-phase circuits are sensitive to the states of the individual circuits in that are linked. I know while testing, I had toggled circuit 1 off at some point. But as I noted during testing, split circuits only turn on and off based upon the state of the higher-numbered circuit (with 1&3 linked, circuit 3 controls the state). Circuit 1 then "does nothing" while toggling it. However, I suspect that's not really true anymore.

Sending the command to disable circuit 1 is possibly putting the panel into a state where the panel is confused because circuit 1 is set to off and circuit 3 is set to on. So there is code fighting in the panel that causes the circuit's relay to turn off and back on again within a few milliseconds (a brown-out condition).

I'd like to re-open this issue for now (if you could @GnoX , I don't have permission) only because if this turns out to be reproducible, then the v0.34.0-d.3 release should not be introduced until it becomes aware of linked split-phase circuits and disallows sending an on/off command to the lower-numbered circuit in the linkage. Otherwise people using this integration will end up short-cycling their circuits and either damaging the devices on those circuits of burn out the relays on the panel.

[ecammit]

Confirmed. I was able to get this to happen with another linked split-phase on 5 & 7 by turning off circuit 5. Eventually packets from the panel cause the integration to report the state of circuit 5 as "on" again, so you don't actually know there's an issue unless you hear the relays clicking in the panel and check the circuit logs in HA. Manually turning off circuit 5, waiting a few seconds, then turning circuit 5 back on again fixes the relay cycling since the integration is sending the command to get circuit 5 back in-sync.

Circuit 5:

Circuit 7:

So I would highly caution against releasing this until split-phase circuits can be identified and added to this integration. Or we could add a giant disclaimer about split-phase circuits (that no one will read).

The other thing I'm wondering about is how the official EcoFlow app actually handles the commands for enabling and disabling split-phase circuits. Perhaps the app sends a command to turn off or turn on both circuits. I'll see if I can get an answer on that from some playing around. My other concern here is that while turning off the higher-numbered circuit may work to turn off the appliance, it may still be keeping the phase of the lower-numbered circuit active. This could mean one current-carrying conductor is still hot and could electrocute someone expecting the whole circuit to be off. It could also cause the circuit to be "half on" in the case a neutral is still used (like another subpanel) such that half the circuits are still on. I'll test this with a multimeter.

[ecammit]

Turning off the higher-numbered circuit DOES disable the power on both circuits... as verified by a multimeter.

[GnoX]

Okay so quickfix could be that for linked circuits, all circuits will go unavailable except the highest number one?

[ecammit]

Okay so quickfix could be that for linked circuits, all circuits will go unavailable except the highest number one?

Yes, that would do it. Unsure if linked circuit info is available through bluetooth or if that info needs to come from Ecoflow servers.

[ecammit]

Correction: I think it's more than that. I think the on/off commands for the linked circuits need to send the command for BOTH circuits. I just caught the circuit cycling off -> on -> off with the higher numbered circuit turned off and the lower-numbered circuit unchanged.

I'm recalling now that when I added split circuits to the cloud integration, I had sent the on and off commands with both circuits specified in the command. There was some problem when not doing both. It wasn't this same issue, but there definitely was one... I just don't recall what.

So I think if we can send both circuits in a single command, that'd be ideal. Otherwise we need two separate commands.

[GnoX]

Yeah, I'm looking through the app at the moment and noticing that we need to send a specific message to request linked circuit info and also found the command to switch circuits that does always switch both of the linked circuits. I'll release another version to send that request command and see if it responds with linked circuit info.

I'm just surprised that they are not doing this at a firmware level but on an application level.

[ecammit]

If for some reason that linked circuit info doesn't work, the LoadStrategyCfg section of the pd303.ProtoPushAndSet lists out all the circuits and the linked circuits all have the same load_priority number. While this is less ideal and the assumption could break in the future, it could be used to determine what is linked. For example, here is my output:

grid_vol: 120
grid_freq: 60
foce_charge_hight: 100
charge_watt_power: 800
master_cur: 100
oil_engine_watt: 500
has_config_done: true
area: "XXXXXXXXXXXXXXXXX"
LoadStrategyCfg {
  is_cfg: 1
  mid_priority_ch_discharge_low: 50
  hall1_ch_info {
    load_is_enable: true
    load_priority: 15
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 4
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 15
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 1
  }
  hall1_ch_info {
    load_priority: 25
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 17
  }
  hall1_ch_info {
    load_priority: 25
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 17
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 2
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 13
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 2
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 13
  }
}
smart_backup_mode: 2
backup_reserve_enable: 1
backup_reserve_soc: 20
solar_backup_reserve_soc: 69
oil_max_output_watt: 3000
backup_incre_info {
  Delta_pro1_info {
    output_power: 0
    ems_bat_temp: 0
    lcd_input_watts: 0
    pv_insert_state: 0
    pv_low_charge_watts: 0
    charge_time: 0
    discharge_time: 0
  }
  Delta_pro2_info {
    model_info {
    }
    is_connect: 0
    battery_soc: 0
    full_cap: 0
    rate_power: 0
    is_ac_open: 0
    output_power: 0
    ems_bat_temp: 0
    lcd_input_watts: 0
    pv_insert_state: 0
    pv_low_charge_watts: 0
    charge_time: 0
    discharge_time: 0
  }
}
rly1_real_sta: 1
rly2_real_sta: 1
rly3_real_sta: 1
rly4_real_sta: 1
phase_sub_value: 180

The section:

LoadStrategyCfg {
  is_cfg: 1
  mid_priority_ch_discharge_low: 50
  hall1_ch_info {
    load_is_enable: true
    load_priority: 15
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 4
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 15
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 1
  }
  hall1_ch_info {
    load_priority: 25
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 17
  }
  hall1_ch_info {
    load_priority: 25
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 17
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 2
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 13
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 2
  }
  hall1_ch_info {
    load_is_enable: true
    load_priority: 13
  }
}

I have linked circuits for 1&3, 5&7, 6&8, 9&11, 10&12. Only 2 and 4 are single circuits. The load_priority values from above reflect that.

[ecammit]

I do also see this in one of the packets:

load_incre_info {
  hall1_incre_info {
    ch1_info {
      splitphase {
        link_mark: true
        link_ch: 3
      }
      set_amp: 30
      icon_num: 4
      ch_name: "Dryer"
      load_rly_cnt: 4120
    }
    ch2_info {
      splitphase {
        link_mark: false
        link_ch: 0
      }
      set_amp: 20
      icon_num: 13
      ch_name: "Toaster Oven, Kegerator, Eva"
      load_rly_cnt: 11
    }
  }
}

And this:

load_incre_info {
  hall1_incre_info {
    ch3_info {
      splitphase {
        link_mark: true
        link_ch: 1
      }
      set_amp: 30
      icon_num: 25
      ch_name: "Front Lights, LR Fr"
      load_rly_cnt: 2712
    }
    ch4_info {
      splitphase {
        link_mark: false
        link_ch: 0
      }
      set_amp: 20
      icon_num: 6
      ch_name: "Refrigerator, Microwave"
      load_rly_cnt: 11
    }
    ch5_info {
      splitphase {
        link_mark: true
        link_ch: 7
      }
      set_amp: 30
      icon_num: 15
      ch_name: "Sunroom Heater"
      load_rly_cnt: 172
    }
    ch6_info {
      splitphase {
        link_mark: true
        link_ch: 8
      }
      set_amp: 30
      icon_num: 3
      ch_name: "Water Heater"
      load_rly_cnt: 29
    }
    ch7_info {
      splitphase {
        link_mark: true
        link_ch: 5
      }
      set_amp: 30
      icon_num: 12
      ch_name: "Heating"
      load_rly_cnt: 140
    }
    ch8_info {
      splitphase {
        link_mark: true
        link_ch: 6
      }
      set_amp: 30
      icon_num: 2
      ch_name: "Hot Water Heater"
      load_rly_cnt: 39
    }
    ch9_info {
      splitphase {
        link_mark: true
        link_ch: 11
      }
      set_amp: 60
      icon_num: 1
      ch_name: "Subpanel"
      load_rly_cnt: 13
    }
    ch10_info {
      splitphase {
        link_mark: true
        link_ch: 12
      }
      set_amp: 30
      icon_num: 2
      ch_name: "Air conditioner"
      load_rly_cnt: 60
    }
    ch11_info {
      splitphase {
        link_mark: true
        link_ch: 9
      }
      set_amp: 60
      icon_num: 1
      ch_name: "Circuit 11"
      load_rly_cnt: 13
    }
    ch12_info {
      splitphase {
        link_mark: true
        link_ch: 10
      }
      set_amp: 30
      icon_num: 1
      ch_name: "Circuit 12"
      load_rly_cnt: 62
    }
    ch1_sta {
      load_sta: LOAD_CH_POWER_ON
      ctrl_mode: RLY_HAND_CTRL_MODE
      notice_set_time: 0
      notice_enble: false
      notice_action: 0
      load_ch_switch_cause: 0
    }
    ch2_sta {
      load_sta: LOAD_CH_POWER_ON
      ctrl_mode: RLY_HAND_CTRL_MODE
    }
  }
}

Definitely has split-phase config info. But also has the circuit names too. It would be great to import those names and use those instead of generic "Circuit ${x}". That's something I can work on if you'd like.