Arduino control

[vkaram]

The HV sources as well as the gate need to be controlled by a MCU.

To Do :

• Small script to get the high voltage value, disable when too much current drawn, ...
• PWM to control 4kV source (optocoupleur)
• Try to get the gate working with a small divider

[vkaram]

• Small script to get the high voltage value, disable when too much current drawn, ...

• PWM to control 4kV source (optocoupleur)

• Try to get the gate working with a small divider

[vkaram]

Divider to read HV2 : minimum 3M ohms => need a buffer