Key for Poke6S needed

[pepperary]

After some user of poke6s updated the firmware of go6 I made, only half of the screen is coming out due to resolution mismatch.
I have firmware of poke6s, but I can't make update.zip because there is no key value.
If you want to get the key value of a device, it seems like you need to get some file information inside that device, right?
but the user's poke6s are in the firmware state of go6, so I don't know if this is possible.
I'd like to ask if you can help me.
Thanks.

[RenateUSB]

The upper right hand corner of the display is the origin.
The native orientation is landscape.
So that's why the upper right hand corner is correct and everything else overflows.

It's too bad that you didn't get libota_jni.so off your Poke6S before you overwrote it with the Go6 system.
So we have to wait until some owner of a Poke6S with original software responds.

[pepperary]

Thank you for your reply.
I guessed that there would be no immediate solution.
I'll have to wait for something good to happen.

[huongcl81]

Hi there I have both boox poke6s and go6. Do you need any help?

[pepperary]

Hi there I have both boox poke6s and go6. Do you need any help?

Oh, that sounds great.
Here manager RenateUSB said that libota_jni.so file is required.

could you do the adb work?
please find the file in the location below and upload it here. I need a poke6s file.
/system/lib/libota_jni.so or /system/lib64/libota_jni.so

If possible, it will be of great help to me and other user. Thank you.