[device-port] [halium-9] [albus] Moto Z2 Play

[jash-maester]

Tree:

• Create manifest Add Motorola Moto Z2 Play [Albus] Manifest halium-devices#302
• Boot image and system image build successfully
• Fixup Mountpoints fixup-mountpoints: Add Moto Z2 Play (Albus) hybris-boot#94
• Device boots into rootfs, usb: Manufacturer: GNU/Linux Device appears in dmesg on host.
• LXC container starts and does not crash
• Apparmor
• libhybris tests
  • test_gps
  • test_hwcomposer
  • test_lights
  • test_vibrator
  • test_wifi
  • test_sensors
  • test_audio
  • test_camera
  • test_input
  • test_nfc
  • test_recorder

I will post further updates as I make further progress.

Fixup Mountpoints:

    "albus")
        sed -i \
            -e 's /dev/block/bootdevice/by-name/fsg /dev/block/mmcblk0p29 ' \
            -e 's /dev/block/bootdevice/by-name/modem /dev/block/mmcblk0p19 ' \
            -e 's /dev/block/bootdevice/by-name/dsp /dev/block/mmcblk0p22 ' \
            -e 's /dev/block/bootdevice/by-name/persist /dev/block/mmcblk0p30 ' \
            -e 's /dev/block/bootdevice/by-name/cache /dev/block/mmcblk0p52 ' \
            -e 's /dev/block/bootdevice/by-name/userdata /dev/block/mmcblk0p54 ' \
            "$@"
        ;;

Procedure:

• Using lineage-16.0-20201209-UNOFFICIAL-albus.zip as the base system. (Downloaded from XDA Developers)
• Format data -> Factory Reset -> Reboot back to TWRP Recovery
• Flash the Lineage 16.0 zip via TWRP -> Format Data -> Reboot Back to TWRP Recovery.
• Flash the halium-boot.img on the boot partition from TWRP Install -> Install Image.
• Flash the Latest Ubports Ubuntu-Touch GSI (As of today V10 from https://mirrors.lolinet.com/firmware/halium/GSI/ )
• Reboot system while phone is connected via USB to PC.
• Check dmesg sudo dmesg -w for rndis .
• ssh into your phone ssh phablet@10.15.19.82.
• DEFAULT Password is phablet.
• The system should boot in a minute with Ubuntu loading screen.

If anything goes wrong:

• Try Telnet into the Phone while its connected via USB to PC. telnet 192.168.2.15
• Try ssh-ing into the device by connecting it to PC via USB cable the ssh phablet@10.15.19.82
• Check the dmesg from inside the phone from the ssh terminal.
• Very long dmesg sometimes result in crash of ssh environment so use sudo dmesg > dmesg.log then less dmesg.log
• If lxc-container is not booting up, then check with sudo lxc-info -n android.
• Root partition will be mounted as Read-Only as per security and safety reasons. If any modification in the root partition is required, it needs to be mounted as Read-Write Partition with sudo mount -o remount,rw /
• You can't install any application using apt-get on the system by default, at least not outside Libertine container. And you shouldn't install using apt or apt-get.

[jash-maester]

Audio Via Bluetooth headset works perfectly fine. But Audio through Speakers and/or headphone jack doesn't work yet.

[jash-maester]

FlashLight works Proximity sensor works. Auto display brightness works (Not as perfectly as Android)

[jash-maester]

4G LTE Works. SMS Works. Calls go out but can't hear audio due to Audio issue.

[nothingneko]

Hey does this still work?