I have trouble in reading Setup file

[imzhangzhao]

on ubuntu 18.04 64bit ,using QT5 and libqglviewer2.7 .it can run ,but have "1 Error for reading Setup file" ,could you give me some advice? thank you .

[KASUYASU]

Which "csim" file did you read? The existing file in the build folder ? or your original "csim" file ? Did you have any other error messages in the Debug field?

[imzhangzhao]

i chose KJ66_Diffuser_Top.csim ,
Gtk-Message: 13:06:30.654: GtkDialog mapped without a transient parent. This is discouraged.
readSetupFile error: 1
the screenshot is in my avatar

[imzhangzhao]

http://m.qpic.cn/psb?/V11lihOd3HtF31/J.4IK4ND1mQfYj87LSgq2vbR2*OJ2V4lVz8jlDtlbHo!/b/dL4AAAAAAAAA&bo=FQPEAgAAAAADF.I!&rf=viewer_4&t=5
http://m.qpic.cn/psb?/V11lihOd3HtF31/*1NQe7GO.5s0iLvHn36TZuRd5zBx25kOvrZCnApFQiI!/b/dLYAAAAAAAAA&bo=FQPEAgAAAAADF.I!&rf=viewer_4&t=5

[KASUYASU]

Maybe, after you read "machine.mspec" , " Tool_table.tbl" and "KJ66_Diffuser_Top.csim" file, you will get next outputs in your Debug field.

g2m: setting rs274 path: /home//cutsim-master/build/bin/rs274
Read Machine Spec. file: /home//cutsim-master/build/bin/machine.mspec
TRAVERSE_FEED_RATE 1500.0
HOLDER_RADIUS 15.0
SPINDLE_RADIUS 11.5
SCENE_RADIUS 100
Successflly read Machine Spec. file
g2m: setting tooltable /home//cutsim-master/build/bin/Tool_table.tbl
Slot No.1 Tool:CYLN Len. 30 Diam. 6 Flute len. 2 Neck Diam. 5.8 Reach len. 22 Shank Diam. 8
Slot No.2 Tool:BALL Len. 30 Diam. 2 Flute len. 3 Neck Diam. 1.8 Reach len. 20 Shank Diam. 4
Slot No.3 Tool:CYLN Len. 30 Diam. 4 Flute len. 5 Neck Diam. 3.9 Reach len. 20 Shank Diam. 6
Slot No.4 Tool:BALL Len. 30 Diam. 1 Flute len. 3 Neck Diam. 0.99 Reach len. 20 Shank Diam. 4
Slot No.5 Tool:BALL Len. 30 Diam. 4 Flute len. 5 Neck Diam. 3.9 Reach len. 20 Shank Diam. 6
Slot No.6 Tool:CYLN Len. 30 Diam. 8 Flute len. 3 Neck Diam. 4 Reach len. 20 Shank Diam. 8
Slot No.7 Tool:CYLN Len. 30 Diam. 10 Flute len. 18 Neck Diam. 10 Reach len. 25 Shank Diam. 10
Slot No.8 Tool:BULL Len. 30 Diam. 4 Flute len. 20 Reach len. 25 Shank Diam. 6 Bull Radius 0.5
Slot No.9 Tool:CONE Len. 30 Diam. 4 Flute len. 20 Reach len. 25 Shank Diam. 6 Tip Radius 1 Base Radius 3
Slot No.10 Tool:DRILL Len. 30 Diam. 4 Flute len. 20 Reach len. 25 Shank Diam. 6 Tip Angle 118
Slot No.32 Tool:?
Read Setup file: /home//cutsim-master/build/bin/KJ66_Diffuser_Top.csim
; KJ66 Diffuser Top Setup file.
OCTREE_CUBE_SIZE 150.02
OCTREE_MAX_DEPTH 9
OCTREE_CENTER 0.0, 0.0, 0.0 OK
USER_ORIGIN 0.0, 0.0, 20.3, 0.0, 0.0, 0.0 OK
INITIAL_POSITION 0.0, 0.0, 20.3, 0.0, 0.0, 0.0 OK
STEP_SIZE VARIABLE 0.05 OK
STOCK
RECTANGLE
WIDTH 150.0
LENGTH 150.0
HIGHT 20.3
CENTER 0.0, 0.0, 0.0
ROTATION 0.0, 0.0, 0.0
RCENTER 0.0, 0.0, 0.0
OPERATION SUM
END STOCK OK
;specific cutting force
SCF 900.0
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CORNER -112.0, -10.0, 20.0
ROTATION 0.0, 0.0, 45.0
RCENTER 0.0, 0.0, 0.0
OPERATION SUM
END PARTS OK
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CORNER -112.0, -10.0, 20.0
ROTATION 0.0, 0.0, -45.0
RCENTER 0.0, 0.0, 0.0
OPERATION SUM
END PARTS OK
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CENTER 63.0, -63.0, 20.0
ROTATION 0.0, 0.0, -35.0
RCENTER 63.0, -63.0, 0.0
OPERATION SUM
END PARTS OK
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CENTER 63.5, 63.5, 20.0
ROTATION 0.0, 0.0, 45.0
RCENTER 63.5, 63.5, 0.0
OPERATION SUM
END PARTS OK
; Open & Read Diffuser#1_Top_Rough_Water_to_Top_Outer_Cut.ngc, Diffuser#2... after this.
Successflly read Setup file

It's all right?

[imzhangzhao]

g2m: setting rs274 path: /home/zhang/cutsim/build/bin/rs274
Read Machine Spec. file: /home/zhang/cutsim/build/bin/machine.mspec
TRAVERSE_FEED_RATE 1500.0
HOLDER_RADIUS 15.0
SPINDLE_RADIUS 11.5
SCENE_RADIUS 100
Successflly read Machine Spec. file
g2m: setting tooltable /home/zhang/cutsim/build/bin/Tool_table.tbl
Slot No.1 Tool:CYLN Len. 30 Diam. 6 Flute len. 2 Neck Diam. 5.8 Reach len. 22 Shank Diam. 8
Slot No.2 Tool:BALL Len. 30 Diam. 2 Flute len. 3 Neck Diam. 1.8 Reach len. 20 Shank Diam. 4
Slot No.3 Tool:CYLN Len. 30 Diam. 4 Flute len. 5 Neck Diam. 3.9 Reach len. 20 Shank Diam. 6
Slot No.4 Tool:BALL Len. 30 Diam. 1 Flute len. 3 Neck Diam. 0.99 Reach len. 20 Shank Diam. 4
Slot No.5 Tool:BALL Len. 30 Diam. 4 Flute len. 5 Neck Diam. 3.9 Reach len. 20 Shank Diam. 6
Slot No.6 Tool:CYLN Len. 30 Diam. 8 Flute len. 3 Neck Diam. 4 Reach len. 20 Shank Diam. 8
Slot No.7 Tool:CYLN Len. 30 Diam. 10 Flute len. 18 Neck Diam. 10 Reach len. 25 Shank Diam. 10
Slot No.8 Tool:CYLN Len. 30 Diam. 4 Flute len. 20 Reach len. 25 Shank Diam. 6
Slot No.32 Tool:?
Read Setup file: /home/zhang/cutsim/build/bin/KJ66_Diffuser_Top.csim
; KJ66 Diffuser Top Setup file.
OCTREE_CUBE_SIZE 150.02
OCTREE_MAX_DEPTH 9
OCTREE_CENTER 0.0, 0.0, 0.0 OK
USER_ORIGIN 0.0, 0.0, 20.3, 0.0, 0.0, 0.0 OK
INITIAL_POSITION 0.0, 0.0, 20.3, 0.0, 0.0, 0.0 OK
STEP_SIZE VARIABLE 0.05 OK
STOCK
RECTANGLE
WIDTH 150.0
LENGTH 150.0
HIGHT 20.3
CENTER 0.0, 0.0, 0.0
ROTATION 0.0, 0.0, 0.0
RCENTER 0.0, 0.0, 0.0
OPERATION SUM
END STOCK OK
;specific cutting force
SCF 900.0
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CORNER -112.0, -10.0, 20.0
ROTATION 0.0, 0.0, 45.0
RCENTER 0.0, 0.0, 0.0
OPERATION SUM
END PARTS OK
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CORNER -112.0, -10.0, 20.0
ROTATION 0.0, 0.0, -45.0
RCENTER 0.0, 0.0, 0.0
OPERATION SUM
END PARTS OK
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CENTER 63.0, -63.0, 20.0
ROTATION 0.0, 0.0, 35.0
RCENTER 63.0, -63.0, 0.0
OPERATION SUM
END PARTS OK
PARTS
RECTANGLE
WIDTH 45.0
LENGTH 20.0
HIGHT 10.0
CENTER 63.5, 63.5, 20.0
ROTATION 0.0, 0.0, -45.0
RCENTER 63.5, 63.5, 0.0
OPERATION SUM
END PARTS OK
; Open & Read Diffuser#1_Top_Rough_Water_to_Top_Outer_Cut.ngc, Diffuser#2... after this.
1 Error for reading Setup file

[KASUYASU]

Maybe, you have some trouble when you port this program to ubuntu 18.04 64bit, using QT5. And also note that you must port the g-code interpreter "rs274" to 64bit system. Later I will upload the revised version of my "cutsim" for Qt Creator 4.8.0(Based on Qt 5.12.0 (GCC 5.3.1 20160406 (Red Hat 5.3.1-6), 64 bit). So, please wait for a while.

[imzhangzhao]

Thanks,i think the problem should be the rs274 interpreter.When I read the .canon file, the program works.
How shoud i compile the rs274 for ubuntu 18.04? I canot make the execute file .

[KASUYASU]

The source code of "rs274" is here.

https://code.google.com/archive/p/rs274ngc/source/default/source

And you must compile these with -DAA and -DCC, but under the C++11 situations, you need to rewrite the function 'gets' because this function is no longer supported.

[imzhangzhao]

I replaced gets with fgets

[KASUYASU]

Please refer to my new repo. 'cutsim-q5'.

[imzhangzhao]

It is so sad ,i still have problem in "rs274".
Successflly read Setup file
g2m: setting file /home/zhang/下载/cutsim-q5-master/build/Test_5Axis.ngc
g2m: interpreting /home/zhang/下载/cutsim-q5-master/build/Test_5Axis.ngc
Interpreter died. Bad tool table?
g2m: Total time to process that file: 36.3411 ms
GPlayer: play

[KASUYASU]

Once, execute your 'rs274' alone. Do you have the following message?

~/cutsim-master-q5/build$ ./rs274
enter a number:
1 = start interpreting
2 = choose parameter file ...
3 = read tool file ...
4 = turn block delete switch ON
5 = adjust error handling...
enter choice =>

You also have my executable 'rs274' file in the folder of "cutsim-q5/build''. It depends on the next libraries.

~/cutsim-master-q5/build$ ldd ./rs274
linux-vdso.so.1 (0x00007ffcb9734000)
libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f59428f6000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f5942505000)
/lib64/ld-linux-x86-64.so.2 (0x00007f5942ecb000)

[imzhangzhao]

./rs274 not work,but ldd ./rs274 show all libraries like yours.

[KASUYASU]

./rs274 not work,but ldd ./rs274 show all libraries like yours.

You mean that not only your 'rs274' but also my pre-compiled one will not work on your PC?

[imzhangzhao]

My compiled rs274 can work,but your rs274 in cutsim-qt5/build cannot work.