Sonoff TH16

[bachoo786]

Hi

Is your code compatible with Sonoff TH16? I have uploaded the correct code of yours but I am not registering any temperature and humidity. I have also installed DHT.h library to no joy.

Is there something I need to enable? am I missing anything?

Thanks.

[AnchorIT]

That is purely a copy of the original It definitely works with DTH22 for me, make sure you have the defines set in <7b0f96b> config_mc.h See his readme https://github.com/KmanOz/KmanSonoff/blob/master/README.md <https://github.com/KmanOz/KmanSonoff> KmanSonoff/ <https://github.com/KmanOz/KmanSonoff/tree/master/arduino> arduino/KmanSonoff_v1.00sc/ From: bachoo786 [mailto:notifications@github.com] Sent: Wednesday, 7 February 2018 12:58 PM To: KmanOz/KmanSonoff <KmanSonoff@noreply.github.com> Cc: Subscribed <subscribed@noreply.github.com> Subject: [KmanOz/KmanSonoff] Sonoff TH16 (#18) Hi Is your code compatible with Sonoff TH16? I have uploaded the correct code of yours but I am not registering any temperature and humidity. I have also installed DHT.h library to no joy. Is there something I need to enable? am I missing anything? Thanks. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#18> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AFHNvUvRZu77iCto47qIoDxns_7Cd6aQks5tSOcegaJpZM4R76-D> . <https://github.com/notifications/beacon/AFHNvbNpEAeVcKHhs14mlY5gEkKgRNqAks5tSOcegaJpZM4R76-D.gif>

[bachoo786]

Hi for the temperature sensor is it mc or school arduino file? I used sc as it contains the dht22 library and talks about temperature?

Thanks

[bachoo786]

I meant mc.h or sc.h?

[AnchorIT]

config_sc.h
change #define NONE to #define TEMP
#define DHTTYPE DHT22

[bachoo786]

right so I done the changes above and have subscribed to the topic as well but yet I cannot receive any temperature values. I can turn the switch on and off.

[bachoo786]

Quick question : does the temperature sensor only work when the sonoff is connected to the mains? Because I am m testing it out from a USB 3v supply

[mjoshd]

Yes. Try connecting it to the mains (after disconnecting from your programming cable of course). I had a similar issue, tried almost everything and thought I was losing my mind, but connecting to mains power solved it and the readings come through just fine now.

[bachoo786]

@mjoshd thanks for the reply.

quick question does this Kman’s code work with DS18B20? because i am not getting any readings with DS18B20 but getting readings with AM2301.

[mjoshd]

Pretty sure it only works with DHT11 & DHT22. I'd highly recommend using a DHT22.

…

On Feb 12, 2018 5:35 PM, "bachoo786" ***@***.***> wrote: @mjoshd <https://github.com/mjoshd> thanks for the reply. quick question does this Kman’s code work with DS18B20? because i am not getting any readings with DS18B20 but getting readings with AM2301. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#18 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AiH_xSaHT0D7wTkcvKLC0tv-BzLRnXoBks5tULyqgaJpZM4R76-D> .

[bachoo786]

yeah but sonoff do 2 types of temp sensors i.e. AM2301 and DS18B20 I think AM2301 is DHT22 because it works fine but DS18B20 is something else ...