本文档主要描述了如何使用 test_client 和 test_server 进行测试。
在运行 test_server 之前，需要先生成证书：
cd build
keyfile=server.key
certfile=server.crt
openssl req -newkey rsa:2048 -x509 -nodes -keyout "$keyfile" -new -out "$certfile" -subj /CN=test.xquic.com运行 test_client 和 test_server：
./test_server -l d > /dev/null &
./test_client -a 127.0.0.1 -p 8443 -s 1024000 -E注意：不同的服务端之间， session ticket 、传输参数、 token 可能是不兼容的。在使用 test_client 连接到一种服务端之后，需要连接到另外一种服务端，则需要删除 test_client 本地保存的 test_session 、 tp_localhost 、 xqc_token 文件，否则可能造成连接失败。 此外，同一个服务端上的不同域名，可能配置了不同的证书。因此，如果要使用 test_client 先后以不同域名连接到同一个服务端，也需要注意本地保存的 test_session 文件可能会造成连接失败。
以下参数都可以在 tests/test_client.c 和 tests/test_server.c 的 usage() 中找到对应说明，如本文档有更新滞后的情况，请以最新代码为准。
| Option | Usage |
|---|---|
| -a | Server addr. |
| -p | Server port. |
| -P | Number of Parallel requests per single connection. Default 1. |
| -n | Total number of requests to send. Defaults 1. |
| -c | Congestion Control Algorithm. r:reno b:bbr c:cubic B:bbr2 bbr+ bbr2+ P:copa |
| -C | Pacing on. |
| -t | Connection timeout. Default 3 seconds. |
| -T | Transport layer. No HTTP3. |
| -1 | Force 1RTT. |
| -s | Body size to send. |
| -F | Abs_timeout to close conn. >=0. |
| -w | Write received body to file. |
| -r | Read sending body from file. priority s > r |
| -l | Log level. e:error d:debug. |
| -E | Echo check on. Compare sent data with received data. |
| -d | Drop rate ‰. |
| -u | Url. default https://test.xquic.com/path/resource |
| -H | Header. eg. key:value |
| -h | Host & sni. eg. test.xquic.com |
| -G | GET on. Default is POST |
| -x | Test case ID |
| -N | No encryption |
| -6 | IPv6 |
| -M | Enable multi-path on. |
| -i | Multi-path interface. e.g. -i interface1 -i interface2. |
| -R | Enable reinjection. Default is 0, no reinjection |
| -V | Force cert verification. 0: don't allow self-signed cert. 1: allow self-signed cert. |
| -q | name-value pair num of request header, default and larger than 6 |
| -o | Output log file path, default ./clog |
| -f | Debug endless loop. |
| -e | Epoch, default is 0. |
| -D | Process num. default is 2. |
| -b | Create connection per second. default is 100. |
| -B | Max connection num. default is 1000. |
| -J | Random CID. default is 0. |
| -Q | Multipath backup path standby, set backup_mode on(1). default backup_mode is 0(off). |
| -A | Multipath request accelerate on. default is 0(off). |
| Option | Usage |
|---|---|
| -a | Server addr. |
| -p | Server port. |
| -e | Echo. Send received body. |
| -c | Congestion Control Algorithm. r:reno b:bbr c:cubic B:bbr2 bbr+ bbr2+ P:copa |
| -C | Pacing on. |
| -L | Endless_sending on. default is off. |
| -s | Body size to send. |
| -w | Write received body to file. |
| -r | Read sending body from file. priority e > s > r |
| -l | Log level. e:error d:debug. |
| -u | Url. default https://test.xquic.com/path/resource |
| -x | Test case ID |
| -6 | IPv6 |
| -b | batch |
| -S | server sid |
| -M | Enable multi-path on. |
| -R | Enable reinjection. Default is 0, no reinjection |
| -E | load balance id encryption on |
| -K | load balance id encryption key |
| -o | Output log file path, default ./slog |
| -m | Set mpshell on |
| -Q | Multipath backup path standby, set backup_mode on(1). default backup_mode is 0(off). |