"Set Value" dialogue does not cover full range of new dB controllers

[MWstudios]

System Information

Windows 11 25H2

LMMS Version(s)

1.3.0-alpha.1.926+2db75bd

Most Recent Working Version

1.3.0-alpha.1.102+g89fc6c960

Bug Summary

When double clicking the volume controllers recently changed to the logarithmic scale, in "Set Value", the value is clamped to [-96, 6] and does not allow the full range supported by the controller. Throughout normal 0%-200% controllers, this bug is not so apparent, but in AudioFileProcessor, the full range is (-∞, 13.98] (500% in linear scale), which is impossible to type in the dialogue.

Expected Behaviour

The "Set Value" dialogue should clamp the min/max values according to the controller.

Steps To Reproduce

1. Add an AudioFileProcessor instrument.
2. Set gain to 500%/13.98 dB (the controller above the waveform).
3. Double click the gain controller. The value gets clamped to 6 dB.

Logs

No response

Screenshots / Minimum Reproducible Project

No response

Please search the issue tracker for existing bug reports before submitting your own.

• I have searched all existing issues and confirmed that this is not a duplicate.

[regulus79]

I can reproduce this issue. It appears to be hard coded into these sorts of volume knobs. However, the faders in the mixer do not exhibit this issue, since they use their own code. I've made a very quick PR to fix it, but it could be refactored more. #8189