dev unlocked cvars dont work

[mefixxx]

Has anyone had any luck getting the unlocked dev cvars to work?
cmd's prefixed ones seem to be ok but most of the interesting debug features do not activate

[Lyall]

Which ones in particular are you trying to use?

[mefixxx]

Im trying to enable some of the debug info to see how the game logic works so mostly ai pathing/corrections/investigation radius:

for example:

• ai_botDebug
• ai_debugStealthHUD
• devgui
• ai_navdebug
• com_debughud
• nav_debug_mesh
• r_snow

There are also references to noclip commands but not the command itself, some mods enabled that already, and Im curious if its a simple as a console command.

Also there's listCvars - Help with explanations for each command, if you can dump that qconsole.log instead of simple cvars I believe it would be more easier to navigate

[devHazz]

Im trying to enable some of the debug info to see how the game logic works so mostly ai pathing/corrections/investigation radius:

for example:

• ai_botDebug

• ai_debugStealthHUD

• devgui

• ai_navdebug

• com_debughud

• nav_debug_mesh

• r_snow

There are also references to noclip commands but not the command itself, some mods enabled that already, and Im curious if its a simple as a console command.

Also there's listCvars - Help with explanations for each command, if you can dump that qconsole.log instead of simple cvars I believe it would be more easier to navigate

I've managed to hook into a Cvar which now displays a prompt for a dev menu on the main title screen but it hangs when pressed on. Will need to do a little further digging as no luck with devgui or devmenu just yet. I'll also dump the cvars with descriptions when I can to support with research aswell

[emoose]

Think there's still a restriction on some cvars being loaded from cfg files too, eg. is_poolCapacity has to be set before game loads, but adding to the .cfg file or .local file doesn't work, despite .local containing is_poolSize from the texture pool size setting, haven't had any luck with using launch args on gamepass ver neither...

E: ah seems those are meant to be set with command-line/launch args, adding this to the read-only cvar hook lets it work:

                    // Clear read-only flag (bit 15)
                    ctx.rax &= ~(1 << 15);
                    // Clear command-line only flag (bit 14)
                    ctx.rax &= ~(1 << 14);

[Lyall]

Also there's listCvars - Help with explanations for each command, if you can dump that qconsole.log instead of simple cvars I believe it would be more easier to navigate

I've updated the cvar dump to include the help descriptions.
https://github.com/Lyall/GreatCircleFix/blob/master/cvardump.txt

[dirtydanisreal]

Think there's still a restriction on some cvars being loaded from cfg files too, eg. is_poolCapacity has to be set before game loads, but adding to the .cfg file or .local file doesn't work, despite .local containing is_poolSize from the texture pool size setting, haven't had any luck with using launch args on gamepass ver neither...

E: ah seems those are meant to be set with command-line/launch args, adding this to the read-only cvar hook lets it work:

                    // Clear read-only flag (bit 15)
                    ctx.rax &= ~(1 << 15);
                    // Clear command-line only flag (bit 14)
                    ctx.rax &= ~(1 << 14);

i have gotten launch params to work on a steam version. Are there any cheat cvars? like where i can give indy book upgrades or specific weapons?

[dirtydanisreal]

Im trying to enable some of the debug info to see how the game logic works so mostly ai pathing/corrections/investigation radius:
for example:

• ai_botDebug
• ai_debugStealthHUD
• devgui
• ai_navdebug
• com_debughud
• nav_debug_mesh
• r_snow

There are also references to noclip commands but not the command itself, some mods enabled that already, and Im curious if its a simple as a console command.
Also there's listCvars - Help with explanations for each command, if you can dump that qconsole.log instead of simple cvars I believe it would be more easier to navigate

I've managed to hook into a Cvar which now displays a prompt for a dev menu on the main title screen but it hangs when pressed on. Will need to do a little further digging as no luck with devgui or devmenu just yet. I'll also dump the cvars with descriptions when I can to support with research aswell

there is a cvar that shows the dev menu option in the pause menu

[devHazz]

Im trying to enable some of the debug info to see how the game logic works so mostly ai pathing/corrections/investigation radius:

for example:

• ai_botDebug

• ai_debugStealthHUD

• devgui

• ai_navdebug

• com_debughud

• nav_debug_mesh

• r_snow

There are also references to noclip commands but not the command itself, some mods enabled that already, and Im curious if its a simple as a console command.

Also there's listCvars - Help with explanations for each command, if you can dump that qconsole.log instead of simple cvars I believe it would be more easier to navigate

I've managed to hook into a Cvar which now displays a prompt for a dev menu on the main title screen but it hangs when pressed on. Will need to do a little further digging as no luck with devgui or devmenu just yet. I'll also dump the cvars with descriptions when I can to support with research aswell

there is a cvar that shows the dev menu option in the pause menu

Still trying to work out how this works in terms of the dev menu in the pause screen. Nothing displays for any state changes in the console or debug logs

[illusionyy]

the imgui menus is constructed but nothing renders it. in idImGuiHostLocal[14] for its rendering but not sure how to restore it, maybe idstudio have some clues?

[Alcoholock]

Think there's still a restriction on some cvars being loaded from cfg files too, eg. is_poolCapacity has to be set before game loads, but adding to the .cfg file or .local file doesn't work, despite .local containing is_poolSize from the texture pool size setting, haven't had any luck with using launch args on gamepass ver neither...
E: ah seems those are meant to be set with command-line/launch args, adding this to the read-only cvar hook lets it work:

                    // Clear read-only flag (bit 15)
                    ctx.rax &= ~(1 << 15);
                    // Clear command-line only flag (bit 14)
                    ctx.rax &= ~(1 << 14);

i have gotten launch params to work on a steam version. Are there any cheat cvars? like where i can give indy book upgrades or specific weapons?

hello,

I was wondering being the owner of most likely the fastest volt modded XYZ in the world ( it had voltage mod and has eenhas seen 1000w) I would really love to figure out what you mean by all this.. I see the bitwise code... and..I see you're changing the bit or flag... but I've tried to put this code in the console....the local file... everything... and no matter what... even with r_allowpathtracingnonnvidia 1 in the exe shortcut....as launch string.. it isn't on when I log in...can you explain in detail what I'd have to exactly do to get this to work on the patch 1 steam versions ..because even when I charade the path tracing on and it says it's on... and I enable the rt version and blah blah..no loss of fps... no change in picture.... ND I just have no idea by what you mean hooking the read only cat with that code you posted ...

soooo...please I'm new so use little words... but I've been on this for 3 days straight now...and I saw h1468 or w.e his face did post a vid of it working...so please please help a poor soul who just wants to prove to ppl..team red can path trace fine.. team green paid them off to give us far and frame gen late so avoid seeing 4070s getting dunked on and easily holding par with 4080s.....I can't actually believe they put effort into actually making this hard to do past enabling in console......but yeah I'd really love to do this ...and now I've been up so long ... I even found the string in ida... tried to reverse it after editing it ...and it was lame. lol

this CTX is currently beating every 4080 super in speedway, port royal and the lightrtt Vulcan solar bat right now.. in 3fmatk the by far most popular bench took period.... And I'm just so interested to see if it could hold up where ppl have told me I'd only get single fps...I disagree...so please shoot me a msg....I'm willing to do whatever to get this on and working... so we can see the truth...either way . ty ty tu

[sean8102]

Im trying to enable some of the debug info to see how the game logic works so mostly ai pathing/corrections/investigation radius:

for example:

• ai_botDebug
• ai_debugStealthHUD
• devgui
• ai_navdebug
• com_debughud
• nav_debug_mesh
• r_snow

There are also references to noclip commands but not the command itself, some mods enabled that already, and Im curious if its a simple as a console command.

Also there's listCvars - Help with explanations for each command, if you can dump that qconsole.log instead of simple cvars I believe it would be more easier to navigate

Yeah I was playing around in the game last night, was most interested in the debug stuff like this (mainly just love looking "behind the curtian" and getting a better idea of how things work. But none of these commands seemed to do anything for me either. The console didn't give any errors and seemed to be changing the values though. My guess is maybe machinegames took out the UI for the devgui?

I also tried some sound debug stuff. I remember in Doom 3 / BFG edition etc their is sound debug function that shows how sound travels in the game and a bunch of other cool stuff. Would love to see it in this game. The audio engine (wwise) is obv more advanced than the sound system in Doom 3. You can tell from looking at different console commands, like how many bounces for the sound it calculates, it uses the Havok Physics middleware to help process sound (like occlusion). Would love for the debug stuff on that to work.

I also got the "Dev Menu" to appear in the main menu. But as others have said, selecting it just takes you to a black screen. Only way I found to get out was to open the console and type "Restart". I'm wondering if they stripped the UI for that menu out in the release builds.

Regardless thank you to the developer of this. Love having full dev console access. Again I just have a bad feeling these aren't working because the UI for them was stripped out of shipping builds, but that's just a guess. I could be totally wrong.

One question if it's ok. I've messed with a lot of the variables in the console. Basically just trying out different debug commands. Is there a easy way to reset everything to the values they are supposed to be? Like if I remove this "mod" and launch the game will the things I changed in the console you normally can't go back to normal? If a full re-install is required that's fine. Beat the game a few weeks ago.

[emoose]

Seems there's still something blocking r_dofAfterTAAMode from being set inside .cfg file, wasn't able to set it via .cfg/.local at least, but console does work with the fix applied, wonder if it's some code blocking it, or maybe some .cfg in the game files is always forcing it back to 0.

(DLSS-RR has a lot of noise issues during cutscenes without that enabled, the value 2 even mentions 2 = Automatic (on when DLSS-RR is used), but they've left it default to 0 for some reason so it goes unused :/ - maybe worth adding a seperate INI fix just to force this if there's no way to get it reading from .cfg)

[dmg2u]

Hi. I tried to use (steam command, *.cfg in game dir) resourceStorage_checkDataCheckSum "0" for testing my localization patch, but game always forcing it back to 1. How I can forcing this to 0?