Issue with TM1814

[morganm5665]

Hello, I'm new to Arduino and I'm trying to get TM1814 lights working with an Arduino Uno R3. I've installed the NeoPixelBus library and downloaded a fresh Arduino ide but when I run the following code I keep getting this initial error:

NeoPixelTest:28:35: error: 'NeoTm1814Method' was not declared in this scope
NeoPixelBus<NeoWrgbTm1814Feature, NeoTm1814Method> strip(PixelCount, PixelPin);

Could someone point out where I'm going wrong? Thanks!

code:

#include <NeoPixelBus.h>
#include <NeoPixelSegmentBus.h>
#include <NeoPixelAnimator.h>
#include <NeoPixelBrightnessBus.h>

const uint16_t PixelCount = 300;
const uint8_t PixelPin = 9;

#define colorSaturation 128

NeoPixelBus<NeoWrgbTm1814Feature, NeoTm1814Method> strip(PixelCount, PixelPin);

RgbColor red(colorSaturation, 0, 0);
RgbColor green(0, colorSaturation, 0);
RgbColor blue(0, 0, colorSaturation);
RgbColor white(colorSaturation);
RgbColor black(0);

HslColor hslRed(red);
HslColor hslGreen(green);
HslColor hslBlue(blue);
HslColor hslWhite(white);
HslColor hslBlack(black);

void setup()
{
Serial.begin(115200);
while (!Serial); // wait for serial attach

Serial.println();
Serial.println("Initializing...");
Serial.flush();

// this resets all the neopixels to an off state
strip.Begin();
strip.Show();


Serial.println();
Serial.println("Running...");

}

void loop()
{
delay(5000);

Serial.println("Colors R, G, B, W...");

// set the colors, 
// if they don't match in order, you need to use NeoGrbFeature feature
strip.SetPixelColor(0, red);
strip.SetPixelColor(1, green);
strip.SetPixelColor(2, blue);
strip.SetPixelColor(3, white);
// the following line demonstrates rgbw color support
// if the NeoPixels are rgbw types the following line will compile
// if the NeoPixels are anything else, the following line will give an error
//strip.SetPixelColor(3, RgbwColor(colorSaturation));
strip.Show();


delay(5000);

Serial.println("Off ...");

// turn off the pixels
strip.SetPixelColor(0, black);
strip.SetPixelColor(1, black);
strip.SetPixelColor(2, black);
strip.SetPixelColor(3, black);
strip.Show();

delay(5000);

Serial.println("HSL Colors R, G, B, W...");

// set the colors, 
// if they don't match in order, you may need to use NeoGrbFeature feature
strip.SetPixelColor(0, hslRed);
strip.SetPixelColor(1, hslGreen);
strip.SetPixelColor(2, hslBlue);
strip.SetPixelColor(3, hslWhite);
strip.Show();


delay(5000);

Serial.println("Off again...");

// turn off the pixels
strip.SetPixelColor(0, hslBlack);
strip.SetPixelColor(1, hslBlack);
strip.SetPixelColor(2, hslBlack);
strip.SetPixelColor(3, hslBlack);
strip.Show();

}

[Makuna]

Please search before asking.
This is answered in Discussion 546