ECC Fail Check

[stonerhash]

Hello I have the following error. Disabling ECC allows me to dump without noticeable issues? Any suggestions? Can the non ECC dump be trusted?

Found programmer device: WinChipHead (WCH) - CH341A
Device revision is 3.0.4
spi_nand_probe: mfr_id = 0xc2, dev_id = 0x12, dev_id_2 = 0xc2
Get Status Register 1: 0x38
Get Status Register 2: 0x10
Using Flash ECC.
Detected SPI NAND Flash: MXIC MX35LF1G, Flash Size: 128 MB
READ:
Read addr = 0x0000000000000000, len = 0x0000000008000000
[spinand_ecc_fail_check] : ECC cannot recover detected !, page = 0x0
spi_nand_read_page: Bad Block, ECC cannot recovery detecte, page = 0x0
Status: BAD(-1)

[McMCCRU]

#5 (comment)