Moved deprecation notice

Author: joespallMS

windows-driver-docs-pr/spb/audio-playback-fidelity-tests-in-mitt.md

@@ -5,13 +5,13 @@ ms.date: 02/27/2026
 ms.topic: how-to
 ---
 
-> [!CAUTION]
-> The following tests are deprecated and are not included in MITT software package versions after 9.0.0.
-
 # Audio playback fidelity tests in MITT
 
 The audio module on the MITT board is used to detect errors that occur at the transport level of the audio device by detecting sine wave frequency accuracy (at zero cross) and counting instances where the frequency or offset is incorrect. Lack of a signal or missed packets results in a shifted waveform that is audible and detectable automatically via this mechanism.
 
+> [!CAUTION]
+> The following tests are deprecated and are not included in MITT software package versions after 9.0.0.
+
 ## Before you begin
 
 - Get a MITT board and an audio adapter. See [Buy hardware for using MITT](./multi-interface-test-tool--mitt--.md).

windows-driver-docs-pr/spb/capacitive-touch-tests-in-mitt.md

@@ -5,9 +5,6 @@ ms.date: 02/27/2026
 ms.topic: concept-article
 ---
 
-> [!CAUTION]
-> The following tests are deprecated and are not included in MITT software package versions after 9.0.0.
-
 # Capacitive touch tests in MITT
 
 Capacitive touch tests in the MITT software package require MCATT (Microsoft Capacitive Applications Test Tool). It's an automation tool for validating capacitive based touch hardware (touchpads and touchscreens). MCATT includes a simple interface for programming the MCATT device and automated tests. You can use the tests to detect ghost points or determine the time table for the first touch input to propagate after system wake.
@@ -18,6 +15,9 @@ You can use MCATT for these test cases:
 - Targeted latency measurements
 - SimpleIo/Device Fundamentals scenarios such as power transitions while performing input on the pad.
 
+> [!CAUTION]
+> The following tests are deprecated and are not included in MITT software package versions after 9.0.0.
+
 ## Before you begin
 
 - Get a MITT board. See [Buy hardware for using MITT](./multi-interface-test-tool--mitt--.md).

windows-driver-docs-pr/spb/gpio-tests-in-mitt.md

@@ -5,13 +5,13 @@ ms.date: 02/27/2026
 ms.topic: how-to
 ---
 
-> [!CAUTION]
-> The following tests are deprecated and are not included in MITT software package versions after 9.0.0.
-
 # GPIO tests in MITT
 
 GPIO test modules that are included in the MITT software package can be used to test the following buttons volume up, volume down, power, and rotation lock. You can use these tests to detect issues with the GPIO drivers and microcontrollers and determine if the systems response to a short or long push is the desired response. The lines attached to the buttons are physically pulled low by the MITT board.
 
+> [!CAUTION]
+> The following tests are deprecated and are not included in MITT software package versions after 9.0.0.
+
 ## Before you begin
 
 - Get a MITT board and a GPIO adapter board. See [Buy hardware for using MITT](./multi-interface-test-tool--mitt--.md).