Set the led state for shutdown cancellation in ShutdownButton and use this value

Author: topas-rec

components/gpio_control/GPIODevices/shutdown_button.py

@@ -54,11 +54,8 @@ def callbackFunctionHandler(self, *args):
                # leave it on for the moment, it will be off when the system is down
                self.when_pressed(*args)
            else:
-               # leave LED on if pressing was cancelled early (during flashing) and status led uses the same pin as shutdown led
-               if status_led.GPIO and (status_led.GPIO is self.led_pin):
-                  self.set_led(GPIO.HIGH)
-               else:
-                  self.set_led(GPIO.LOW)
+               # switch off LED if pressing was cancelled early (during flashing)
+               self.set_led(self.led_state_shutdown_cancelled)
 
 
     def __repr__(self):

components/gpio_control/gpio_control.py

@@ -125,6 +125,8 @@ def gpio_loop(self):
     gpio_controler = gpio_control(phoniebox_function_calls)
 
     devices = gpio_controler.get_all_devices(config)
+    # Sets the led value at the shutdown button that should be used in case of the shutdown
+    # sequence is cancelled if StatusLED and ShutdownLED use the sampe GPIO
     gpio_controler.checkDevicesDependencies()
     gpio_controler.print_all_devices()
     gpio_controler.gpio_loop()