rotaryw2

---

Rotary W 2 Click

Rotary W 2 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : Nenad Filipovic
• Date : Sep 2023.
• Type : SPI type

Software Support

Example Description

This library contains the API for the Rotary W 2 Click driver to control LEDs states and a rotary encoder position readings.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.RotaryW2

Example Key Functions

• rotaryw2_cfg_setup Config Object Initialization function.

void rotaryw2_cfg_setup ( rotaryw2_cfg_t *cfg );

• rotaryw2_init Initialization function.

err_t rotaryw2_init ( rotaryw2_t *ctx, rotaryw2_cfg_t *cfg );

• rotaryw2_default_cfg Click Default Configuration function.

err_t rotaryw2_default_cfg ( rotaryw2_t *ctx );

• rotaryw2_set_led_pos Rotary W 2 set LED position function.

err_t rotaryw2_set_led_pos ( rotaryw2_t *ctx, uint8_t led_pos );

• rotaryw2_set_led_data Rotary W 2 set LED data function.

err_t rotaryw2_set_led_data ( rotaryw2_t *ctx, uint16_t data_in );

• rotaryw2_get_state_switch Rotary W 2 get switch state function.

uint8_t rotaryw2_get_state_switch ( rotaryw2_t *ctx );

Application Init

Initialization of SPI module and log UART. After the driver init, the app executes a default configuration and turn off all LEDs.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    rotaryw2_cfg_t rotaryw2_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    rotaryw2_cfg_setup( &rotaryw2_cfg );
    ROTARYW2_MAP_MIKROBUS( rotaryw2_cfg, MIKROBUS_1 );
    if ( SPI_MASTER_ERROR == rotaryw2_init( &rotaryw2, &rotaryw2_cfg ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( ROTARYW2_ERROR == rotaryw2_default_cfg ( &rotaryw2 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

This example demonstrates the use of the Rotary W 2 Click board™. The demo example shows the functionality of a rotary encoder used to control LEDs.

void application_task ( void )
{
    if ( ROTARYW2_OK == rotaryw2_set_led_data( &rotaryw2, led_data ) )
    {
        rotaryw2_switch_detection( );
        rotaryw2_encoder_mechanism( );
    }
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---