This is a very simple receiver built with pre-assembled modules. The receiver is based on the si4732 chip
Bill Of Material:
- 1 x Arduino NANO
- 1 x OLED Display 128x64
- 1 x Module UVK5 IOTCU V5.0 4732
- 1 x Module TDA1308
- 6 x Push button
- 2 x 10k ohm resistor
- 1 x Encoder
VIDEO: https://www.youtube.com/shorts/QgDcTDn86s8
The firmware is a custom version of ATS_EX project by Goshante
You can use any ATS 20 firmware with few changes ( controls and connections )
Last Update: 16/03/2025 Giuseppe Callipo IK8YFW