Skip to content

Latest commit

 

History

History
75 lines (38 loc) · 3.46 KB

indoor-faq.md

File metadata and controls

75 lines (38 loc) · 3.46 KB

Indoor ROCK Pi Hotspot FAQs

What is the antenna connector on the Hotspot?

The indoor unit has a RP-SMA Female Connector on.

Can I add 4G connectivity to my Indoor Hotspot?

No, the indoor unit does not have the ability to have a 4G Modem added, you could use a solution like a MiFi or 4G to Ethernet module to achieve the same result.

How much internet data per month does the Hotspot use?

Currently we are roughly estimating 30-50GB per month.

The actual usage may be slightly less or more and will be something we up-date over time as we start measuring more units.

Once all hotspots become "light hotspots" this data usage will reduce.

What antenna is included with the Hotspot?

A 3dBi Omni-directional antenna is included with the Nebra Indoor Hotspot, specifications can be found on the overview page.

Upgraded antennas can be purchased separately from our website.

Can I use PoE with the Indoor Hotspot?

If you wish to use PoE with the Indoor Hotspot you will require an active PoE splitter that outputs 12V to the unit. Alternatively you can use passive PoE adapters as long as the power provided to the unit is between 9 and 16 Volts and can provide 15W of power.

How long does it take for my Hotspot to sync with the network?

This can vary depending on your internet connection speed. However, in our testing it takes approximately 24-48 hours for the initial synchronisation to be completed.

What is differnce between regular indoor hotspot and ROCK-Pi Indoor Hotspot?

ROCK Pi hotspot is new series of Nebra hotspot with more RAM, Inbuilt storage and improved performance.

I have an issue but not listed here?

If your issues cannot be resolved with information from this FAQs page or the troubleshooting page then please email [email protected] and include the following information:

  • Model of unit?
  • Mac address of the unit (Shown as ETH on sticker)?
  • Frequency of the unit (Shown as Freq on sticker)?
  • How are you connecting it to internet? (Ethernet, Wi-Fi, Cellular)?
  • How are you powering the unit? (included adaptor, PoE, third party adaptor)

If the issue relates to initial setup of the hotspot, please also include:

  • What make & model of phone are you using?
  • What version of the Helium App are you using?
  • Do you have any screenshots of any error codes?

Alternatively, you can get in touch using any of the methods listed on our support page and we'll work on resolving your issue.