t480 and t480s added to sealed pictures

Author: alexgithublab

source/components/nitropad-nitropc/images/T480_sealed.jpg

@@ -7,49 +7,64 @@ If you ordered your NitroPad or NitroPC with sealed screws and in a sealed bag,
 
 The bag and all screws on the bottom of the device have been sealed. For the bag and each of these screws you have received a photo by e-mail. The orientation of the photos is such that the battery is on top.
 
+
+
 1. Check each screw individually to see if its individual appearance
    matches the photo. It is best to use a magnifying glass or macro lens
    for this purpose. The screws are numbered as follows.
-   
-   Nitropad NV41:
-   
-   .. figure:: /components/nitropad-nitropc/images/nv41_sealed.jpg
-      :alt: NV41
 
-   Nitropad NS50:
+2. If the bag or the screws do not match the photos sent, an
+   unauthorized opening of your NitroPad or NitroPC cannot be excluded. In this
+   case please contact us to arrange further action.
 
-   .. figure:: /components/nitropad-nitropc/images/ns50_sealed.jpg
-      :alt: NS50
+This example shows a sealed screw whose glitter represents an
+individual pattern.
 
-   Nitropad V54:
+.. figure:: /components/nitropad-nitropc/images/Schraube.jpg
+   :alt: img
 
-   .. figure:: /components/nitropad-nitropc/images/V54_sealed.jpg
-      :alt: V54
 
-   NitroPad X230:
+Nitropad NV41
+*************
+ 
+.. figure:: /components/nitropad-nitropc/images/nv41_sealed.jpg
+   :alt: NV41
 
-   .. figure:: /components/nitropad-nitropc/images/SchraubenmarkierungX230.jpg
-      :alt: X230
+Nitropad NS50
+*************
+.. figure:: /components/nitropad-nitropc/images/ns50_sealed.jpg
+   :alt: NS50
 
-   NitroPad T430:
+Nitropad V54
+************
+.. figure:: /components/nitropad-nitropc/images/V54_sealed.jpg
+   :alt: V54
 
-   .. figure:: /components/nitropad-nitropc/images/SchraubenmarkierungT430.jpg
-      :alt: T430
-   
-   NitroPC Pro 2:
+NitroPad X230
+*************
+.. figure:: /components/nitropad-nitropc/images/SchraubenmarkierungX230.jpg
+   :alt: X230
 
-      For the NitroPC Pro 2 we use tamper evident tape on the casing.
-      After receiving your computer check that no tape have been removed.
-      Then you can remove the tape and use rubbing alcohol to remove the tamper marks.
+NitroPad T430
+*************
+.. figure:: /components/nitropad-nitropc/images/SchraubenmarkierungT430.jpg
+   :alt: T430
+ 
+NitroPC Pro 2
+*************
 
+For the NitroPC Pro 2 we use tamper evident tape on the casing.
+After receiving your computer check that no tape have been removed.
+Then you can remove the tape and use rubbing alcohol to remove the tamper marks.
 
-   This example shows a sealed screw whose glitter represents an
-   individual pattern.
+NitroPad T480
+*************
 
-   .. figure:: /components/nitropad-nitropc/images/Schraube.jpg
-      :alt: img
+.. figure:: /components/nitropad-nitropc/images/T480_sealed.jpg
+    :alt: T480
 
+NitroPad T480s
+**************
 
-2. If the bag or the screws do not match the photos sent, an
-   unauthorized opening of your NitroPad or NitroPC cannot be excluded. In this
-   case please contact us to arrange further action.
+.. figure:: /components/nitropad-nitropc/images/T480s_sealed.jpg
+    :alt: T480