First of all, this plugin is a must for anyone having Octoprint AND a home automation sysytem. Well done, thank you!!!
{
"external perimeters extrusion width": "0.45mm",
"perimeters extrusion width": "0.45mm",
"infill extrusion width": "0.45mm",
"solid infill extrusion width": "0.45mm",
"top infill extrusion width": "0.40mm",
"support material extrusion width": "0.35mm",
"first layer extrusion width": "0.80mm",
"max_layer_z": "21.5",
"objects_info": "{\"objects\":[{\"name\":\"enclosure-Top.stl id:0 copy 0\",\"polygon\":[[169.974,60.414],[170.713,60.525],[171.769,60.895],[172.417,61.269],[173.265,61.999],[173.731,62.583],[174.254,63.573],[174.544,64.655],[174.600,65.400],[174.600,144.600],[174.544,145.345],[174.254,146.427],[173.731,147.417],[173.001,148.265],[172.417,148.731],[171.427,149.254],[170.345,149.544],[169.600,149.600],[80.400,149.600],[79.287,149.475],[78.231,149.105],[77.583,148.731],[76.735,148.001],[76.269,147.417],[75.746,146.427],[75.456,145.345],[75.400,144.600],[75.400,65.400],[75.525,64.287],[75.895,63.231],[76.491,62.283],[76.999,61.735],[77.900,61.070],[78.573,60.746],[79.655,60.456],[80.400,60.400]]}]}",
"filament used [mm]": "12803.04",
"filament used [cm3]": "30.79",
"filament used [g]": "38.19",
"filament cost": "0.95",
"total filament used [g]": "38.19",
"total filament cost": "0.95",
"total filament used for wipe tower [g]": "0.00",
"estimated printing time (normal mode)": "2h 54m 3s",
"estimated printing time (silent mode)": "2h 55m 44s",
"estimated first layer printing time (normal mode)": "10m 17s",
"estimated first layer printing time (silent mode)": "10m 19s",
"prusaslicer_config": "end",
"arc_fitting": "disabled",
"autoemit_temperature_commands": "1",
"automatic_extrusion_widths": "0",
"automatic_infill_combination": "0",
"automatic_infill_combination_max_layer_height": "100%",
"avoid_crossing_curled_overhangs": "0",
"avoid_crossing_perimeters": "0",
"avoid_crossing_perimeters_max_detour": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_shape": "0x0,250x0,250x210,0x210",
"bed_temperature": "55",
"bed_temperature_extruder": "0",
"before_layer_gcode": ";BEFORE_LAYER_CHANGE\\nG92 E0.0\\n;[layer_z]\\n\\n",
"between_objects_gcode": "",
"binary_gcode": "0",
"bottom_fill_pattern": "monotonic",
"bottom_solid_layers": "4",
"bottom_solid_min_thickness": "0.5",
"bridge_acceleration": "1000",
"bridge_angle": "0",
"bridge_fan_speed": "100",
"bridge_flow_ratio": "0.95",
"bridge_speed": "30",
"brim_separation": "0.1",
"brim_type": "no_brim",
"brim_width": "0",
"chamber_minimal_temperature": "0",
"chamber_temperature": "0",
"color_change_gcode": "M600\\nG1 E0.3 F1500 ; prime after color change",
"colorprint_heights": "",
"compatible_printers_condition_cummulative": "\"printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4\";\"nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)\"",
"complete_objects": "0",
"cooling": "1",
"cooling_perimeter_transition_distance": "0",
"cooling_slowdown_logic": "uniform_cooling",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"custom_parameters_filament": "\"\"",
"custom_parameters_print": "",
"custom_parameters_printer": "",
"default_acceleration": "1000",
"default_filament_profile": "\"Prusament PLA\"",
"default_print_profile": "0.15mm QUALITY @MK3",
"deretract_speed": "0",
"disable_fan_first_layers": "1",
"dont_support_bridges": "1",
"draft_shield": "disabled",
"duplicate_distance": "6",
"elefant_foot_compensation": "0.2",
"enable_dynamic_fan_speeds": "0",
"enable_dynamic_overhang_speeds": "0",
"end_filament_gcode": "\"; Filament-specific end gcode\"",
"end_gcode": "{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\\nG1 X0 Y200 F3600 ; park\\n{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\\nG4 ; wait\\nM221 S100 ; reset flow\\nM900 K0 ; reset LA\\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heatbed\\nM107 ; turn off fan\\nM84 ; disable motors\\n; max_layer_z = [max_layer_z]",
"ensure_vertical_shell_thickness": "enabled",
"external_perimeter_acceleration": "0",
"external_perimeter_extrusion_width": "0.45",
"external_perimeter_speed": "25",
"external_perimeters_first": "0",
"extra_loading_move": "-2",
"extra_perimeters": "0",
"extra_perimeters_on_overhangs": "0",
"extruder_clearance_height": "20",
"extruder_clearance_radius": "45",
"extruder_colour": "\"\"",
"extruder_offset": "0x0",
"extrusion_axis": "E",
"extrusion_multiplier": "1",
"extrusion_width": "0.45",
"fan_always_on": "1",
"fan_below_layer_time": "100",
"filament_abrasive": "0",
"filament_colour": "#FF8000",
"filament_cooling_final_speed": "3.4",
"filament_cooling_initial_speed": "2.2",
"filament_cooling_moves": "4",
"filament_cost": "25",
"filament_density": "1.24",
"filament_deretract_speed": "nil",
"filament_diameter": "1.75",
"filament_infill_max_crossing_speed": "0",
"filament_infill_max_speed": "0",
"filament_load_time": "0",
"filament_loading_speed": "28",
"filament_loading_speed_start": "3",
"filament_max_volumetric_speed": "15",
"filament_minimal_purge_on_wipe_tower": "15",
"filament_multitool_ramming": "0",
"filament_multitool_ramming_flow": "10",
"filament_multitool_ramming_volume": "10",
"filament_notes": "filament_type=Walami",
"filament_purge_multiplier": "100%",
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
"filament_retract_before_travel": "nil",
"filament_retract_before_wipe": "nil",
"filament_retract_layer_change": "nil",
"filament_retract_length": "nil",
"filament_retract_length_toolchange": "nil",
"filament_retract_lift": "nil",
"filament_retract_lift_above": "nil",
"filament_retract_lift_below": "nil",
"filament_retract_restart_extra": "nil",
"filament_retract_restart_extra_toolchange": "nil",
"filament_retract_speed": "nil",
"filament_seam_gap_distance": "nil",
"filament_settings_id": "\"PLA - Real, Creality\"",
"filament_shrinkage_compensation_xy": "0.2%",
"filament_shrinkage_compensation_z": "0.25%",
"filament_soluble": "0",
"filament_spool_weight": "210",
"filament_stamping_distance": "0",
"filament_stamping_loading_speed": "20",
"filament_toolchange_delay": "0",
"filament_travel_lift_before_obstacle": "nil",
"filament_travel_max_lift": "nil",
"filament_travel_ramping_lift": "nil",
"filament_travel_slope": "nil",
"filament_type": "PLA",
"filament_unload_time": "0",
"filament_unloading_speed": "90",
"filament_unloading_speed_start": "100",
"filament_vendor": "Generic",
"filament_wipe": "nil",
"fill_angle": "45",
"fill_density": "10%",
"fill_pattern": "gyroid",
"first_layer_acceleration": "1000",
"first_layer_acceleration_over_raft": "0",
"first_layer_bed_temperature": "60",
"first_layer_extrusion_width": "0.8",
"first_layer_height": "0.3",
"first_layer_infill_speed": "0",
"first_layer_speed": "30%",
"first_layer_speed_over_raft": "30",
"first_layer_temperature": "215",
"full_fan_speed_layer": "4",
"fuzzy_skin": "none",
"fuzzy_skin_point_dist": "0.8",
"fuzzy_skin_thickness": "0.3",
"gap_fill_enabled": "1",
"gap_fill_speed": "40",
"gcode_comments": "1",
"gcode_flavor": "marlin",
"gcode_label_objects": "octoprint",
"gcode_resolution": "0.0125",
"gcode_substitutions": "",
"high_current_on_filament_swap": "0",
"host_type": "prusalink",
"idle_temperature": "nil",
"infill_acceleration": "1000",
"infill_anchor": "2.5",
"infill_anchor_max": "12",
"infill_every_layers": "1",
"infill_extruder": "1",
"infill_extrusion_width": "0.45",
"infill_first": "0",
"infill_overlap": "25%",
"infill_speed": "80",
"inherits_cummulative": "\"0.20mm QUALITY @MK3\";\"Generic PLA\";\"Original Prusa i3 MK3S & MK3S+\"",
"interface_shells": "0",
"interlocking_beam": "0",
"interlocking_beam_layer_count": "2",
"interlocking_beam_width": "0.8",
"interlocking_boundary_avoidance": "2",
"interlocking_depth": "2",
"interlocking_orientation": "22.5",
"ironing": "0",
"ironing_flowrate": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"layer_gcode": ";AFTER_LAYER_CHANGE\\n;[layer_z]\\n\\n@SNAPSHOT",
"layer_height": "0.2",
"machine_limits_usage": "emit_to_gcode",
"machine_max_acceleration_e": "5000,5000",
"machine_max_acceleration_extruding": "1250,1250",
"machine_max_acceleration_retracting": "1250,1250",
"machine_max_acceleration_travel": "1500,1250",
"machine_max_acceleration_x": "1000,960",
"machine_max_acceleration_y": "1000,960",
"machine_max_acceleration_z": "200,200",
"machine_max_feedrate_e": "120,120",
"machine_max_feedrate_x": "200,100",
"machine_max_feedrate_y": "200,100",
"machine_max_feedrate_z": "12,12",
"machine_max_jerk_e": "4.5,4.5",
"machine_max_jerk_x": "8,8",
"machine_max_jerk_y": "8,8",
"machine_max_jerk_z": "0.4,0.4",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"max_fan_speed": "100",
"max_layer_height": "0.25",
"max_print_height": "210",
"max_print_speed": "200",
"max_volumetric_extrusion_rate_slope_negative": "0",
"max_volumetric_extrusion_rate_slope_positive": "0",
"max_volumetric_speed": "0",
"min_bead_width": "85%",
"min_fan_speed": "100",
"min_feature_size": "25%",
"min_layer_height": "0.07",
"min_print_speed": "15",
"min_skirt_length": "4",
"mmu_segmented_region_interlocking_depth": "0",
"mmu_segmented_region_max_width": "0",
"multimaterial_purging": "140",
"notes": "",
"nozzle_diameter": "0.4",
"nozzle_high_flow": "0",
"only_one_perimeter_first_layer": "0",
"only_retract_when_crossing_perimeters": "0",
"ooze_prevention": "0",
"output_filename_format": "{input_filename_base}_{printing_filament_types}_{print_time}.gcode",
"over_bridge_speed": "0",
"overhang_fan_speed_0": "0",
"overhang_fan_speed_1": "0",
"overhang_fan_speed_2": "0",
"overhang_fan_speed_3": "0",
"overhang_speed_0": "15",
"overhang_speed_1": "15",
"overhang_speed_2": "20",
"overhang_speed_3": "25",
"overhangs": "1",
"parking_pos_retraction": "92",
"pause_print_gcode": "M601",
"perimeter_acceleration": "800",
"perimeter_extruder": "1",
"perimeter_extrusion_width": "0.45",
"perimeter_generator": "arachne",
"perimeter_speed": "45",
"perimeters": "2",
"physical_printer_settings_id": "",
"post_process": "",
"prefer_clockwise_movements": "0",
"print_settings_id": "0.20mm QUALITY 10% infill - PLA",
"printer_model": "MK3S",
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\\nPRINTER_VENDOR_PRUSA3D\\nPRINTER_MODEL_MK3\\n",
"printer_settings_id": "Original Prusa i3 MK3S & MK3S+ - defaults",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printer_vendor": "",
"raft_contact_distance": "0.1",
"raft_expansion": "1.5",
"raft_first_layer_density": "90%",
"raft_first_layer_expansion": "3",
"raft_layers": "0",
"remaining_times": "1",
"resolution": "0",
"retract_before_travel": "1",
"retract_before_wipe": "0%",
"retract_layer_change": "1",
"retract_length": "0.8",
"retract_length_toolchange": "4",
"retract_lift": "0.4",
"retract_lift_above": "0",
"retract_lift_below": "209",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_speed": "35",
"scarf_seam_entire_loop": "0",
"scarf_seam_length": "20",
"scarf_seam_max_segment_length": "1",
"scarf_seam_on_inner_perimeters": "0",
"scarf_seam_only_on_smooth": "1",
"scarf_seam_placement": "nowhere",
"scarf_seam_start_height": "0%",
"seam_gap_distance": "15%",
"seam_position": "random",
"silent_mode": "1",
"single_extruder_multi_material": "0",
"single_extruder_multi_material_priming": "0",
"skirt_distance": "2",
"skirt_height": "3",
"skirts": "1",
"slice_closing_radius": "0.049",
"slicing_mode": "regular",
"slowdown_below_layer_time": "12",
"small_perimeter_speed": "25",
"solid_infill_acceleration": "0",
"solid_infill_below_area": "0",
"solid_infill_every_layers": "0",
"solid_infill_extruder": "1",
"solid_infill_extrusion_width": "0.45",
"solid_infill_speed": "80",
"spiral_vase": "0",
"staggered_inner_seams": "0",
"standby_temperature_delta": "-5",
"start_filament_gcode": "\"{if printer_notes!~/.*(MK3.5|MINIIS).*/}\\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0\\n{endif}\\n\\n{if printer_notes=~/.*MINIIS.*/}\\nM572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.27{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}\\n{endif}\\n\\n{if printer_notes=~/.*MK3.5.*/}\\nM572 S{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\\n{endif}\"",
"start_gcode": "M862.3 P \"[printer_model]\" ; printer model check\\nM862.1 P[nozzle_diameter] ; nozzle diameter check\\nM115 U3.14.1 ; tell printer latest fw version\\nG90 ; use absolute coordinates\\nM83 ; extruder relative mode\\nM104 S[first_layer_temperature] ; set extruder temp\\nM140 S[first_layer_bed_temperature] ; set bed temp\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG28 W ; home all without mesh bed level\\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\\nG1 Z0.3 F720\\nG1 Y-3 F1000 ; go outside print area\\nG92 E0\\nG1 X60 E9 F1000 ; intro line\\nG1 X100 E9 F1000 ; intro line\\n{else}\\nG1 Z0.2 F720\\nG1 Y-3 F1000 ; go outside print area\\nG92 E0\\nG1 X60 E9 F1000 ; intro line\\nG1 X100 E12.5 F1000 ; intro line\\n{endif}\\nG92 E0\\nM221 S{if layer_height<0.075}100{else}95{endif}\\n\\n; Don't change E values below. Excessive value can damage the printer.\\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}",
"support_material": "1",
"support_material_angle": "0",
"support_material_auto": "0",
"support_material_bottom_contact_distance": "0",
"support_material_bottom_interface_layers": "-1",
"support_material_buildplate_only": "0",
"support_material_closing_radius": "2",
"support_material_contact_distance": "0.1",
"support_material_enforce_layers": "0",
"support_material_extruder": "0",
"support_material_extrusion_width": "0.35",
"support_material_interface_contact_loops": "0",
"support_material_interface_extruder": "0",
"support_material_interface_layers": "2",
"support_material_interface_pattern": "rectilinear",
"support_material_interface_spacing": "0.2",
"support_material_interface_speed": "80%",
"support_material_pattern": "rectilinear",
"support_material_spacing": "2",
"support_material_speed": "50",
"support_material_style": "grid",
"support_material_synchronize_layers": "0",
"support_material_threshold": "55",
"support_material_with_sheath": "0",
"support_material_xy_spacing": "50%",
"support_tree_angle": "40",
"support_tree_angle_slow": "25",
"support_tree_branch_diameter": "2",
"support_tree_branch_diameter_angle": "5",
"support_tree_branch_diameter_double_wall": "3",
"support_tree_branch_distance": "1",
"support_tree_tip_diameter": "0.8",
"support_tree_top_rate": "15%",
"temperature": "210",
"template_custom_gcode": "",
"thick_bridges": "1",
"thin_walls": "0",
"thumbnails": "160x120/PNG, 16x16/PNG, 200x200/PNG, 640x480/PNG, 800x600/PNG",
"thumbnails_format": "PNG",
"toolchange_gcode": "",
"top_fill_pattern": "monotonic",
"top_infill_extrusion_width": "0.4",
"top_one_perimeter_type": "none",
"top_solid_infill_acceleration": "0",
"top_solid_infill_speed": "40",
"top_solid_layers": "5",
"top_solid_min_thickness": "0.7",
"travel_acceleration": "0",
"travel_lift_before_obstacle": "0",
"travel_max_lift": "0",
"travel_ramping_lift": "0",
"travel_short_distance_acceleration": "0",
"travel_slope": "0",
"travel_speed": "180",
"travel_speed_z": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"use_volumetric_e": "0",
"variable_layer_height": "1",
"wall_distribution_count": "1",
"wall_transition_angle": "10",
"wall_transition_filter_deviation": "25%",
"wall_transition_length": "100%",
"wipe": "1",
"wipe_into_infill": "0",
"wipe_into_objects": "0",
"wipe_tower": "1",
"wipe_tower_acceleration": "0",
"wipe_tower_bridging": "10",
"wipe_tower_brim_width": "2",
"wipe_tower_cone_angle": "0",
"wipe_tower_extra_flow": "100%",
"wipe_tower_extra_spacing": "100%",
"wipe_tower_extruder": "0",
"wipe_tower_no_sparse_layers": "0",
"wipe_tower_width": "60",
"wiping_volumes_matrix": "0",
"wiping_volumes_use_custom_matrix": "0",
"xy_size_compensation": "0",
"z_offset": "0"
}It is correct, I can parse it in HA, all is good.
However, when the printing is finished/cancelled, another message gets sent to the same topic, which seems to be empty. I'm not sure the message is empty, because it does something to my MQTT broker, that I haven't ever seen before: it not only removes the topic (from MQTT Explorer, for example) - which I would expect from a retained message, but it also prevent HA to pick up the next published message when the next print starts.
This has the effect of HA never displaying the correct material type. If a print is ongoing and I restart HA, the retained message gets picked up normally, and it displays the filament type correctly.
Here is my sensor for reference only, as I don't think the problem lies there:
I've spent my last week end on investigating this, but this is all I came up with.
Any idea, what that message could be? Maybe a way of disabling that message at the end of printing?
First of all, this plugin is a must for anyone having Octoprint AND a home automation sysytem. Well done, thank you!!!
I only have one issue that i found while setting it up:
I have the Additional Metadata section in Settings filled out as follows:
This message, as expected, does get sent when the printing starts. It looks like something like this:
{ "external perimeters extrusion width": "0.45mm", "perimeters extrusion width": "0.45mm", "infill extrusion width": "0.45mm", "solid infill extrusion width": "0.45mm", "top infill extrusion width": "0.40mm", "support material extrusion width": "0.35mm", "first layer extrusion width": "0.80mm", "max_layer_z": "21.5", "objects_info": "{\"objects\":[{\"name\":\"enclosure-Top.stl id:0 copy 0\",\"polygon\":[[169.974,60.414],[170.713,60.525],[171.769,60.895],[172.417,61.269],[173.265,61.999],[173.731,62.583],[174.254,63.573],[174.544,64.655],[174.600,65.400],[174.600,144.600],[174.544,145.345],[174.254,146.427],[173.731,147.417],[173.001,148.265],[172.417,148.731],[171.427,149.254],[170.345,149.544],[169.600,149.600],[80.400,149.600],[79.287,149.475],[78.231,149.105],[77.583,148.731],[76.735,148.001],[76.269,147.417],[75.746,146.427],[75.456,145.345],[75.400,144.600],[75.400,65.400],[75.525,64.287],[75.895,63.231],[76.491,62.283],[76.999,61.735],[77.900,61.070],[78.573,60.746],[79.655,60.456],[80.400,60.400]]}]}", "filament used [mm]": "12803.04", "filament used [cm3]": "30.79", "filament used [g]": "38.19", "filament cost": "0.95", "total filament used [g]": "38.19", "total filament cost": "0.95", "total filament used for wipe tower [g]": "0.00", "estimated printing time (normal mode)": "2h 54m 3s", "estimated printing time (silent mode)": "2h 55m 44s", "estimated first layer printing time (normal mode)": "10m 17s", "estimated first layer printing time (silent mode)": "10m 19s", "prusaslicer_config": "end", "arc_fitting": "disabled", "autoemit_temperature_commands": "1", "automatic_extrusion_widths": "0", "automatic_infill_combination": "0", "automatic_infill_combination_max_layer_height": "100%", "avoid_crossing_curled_overhangs": "0", "avoid_crossing_perimeters": "0", "avoid_crossing_perimeters_max_detour": "0", "bed_custom_model": "", "bed_custom_texture": "", "bed_shape": "0x0,250x0,250x210,0x210", "bed_temperature": "55", "bed_temperature_extruder": "0", "before_layer_gcode": ";BEFORE_LAYER_CHANGE\\nG92 E0.0\\n;[layer_z]\\n\\n", "between_objects_gcode": "", "binary_gcode": "0", "bottom_fill_pattern": "monotonic", "bottom_solid_layers": "4", "bottom_solid_min_thickness": "0.5", "bridge_acceleration": "1000", "bridge_angle": "0", "bridge_fan_speed": "100", "bridge_flow_ratio": "0.95", "bridge_speed": "30", "brim_separation": "0.1", "brim_type": "no_brim", "brim_width": "0", "chamber_minimal_temperature": "0", "chamber_temperature": "0", "color_change_gcode": "M600\\nG1 E0.3 F1500 ; prime after color change", "colorprint_heights": "", "compatible_printers_condition_cummulative": "\"printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4\";\"nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)\"", "complete_objects": "0", "cooling": "1", "cooling_perimeter_transition_distance": "0", "cooling_slowdown_logic": "uniform_cooling", "cooling_tube_length": "5", "cooling_tube_retraction": "91.5", "custom_parameters_filament": "\"\"", "custom_parameters_print": "", "custom_parameters_printer": "", "default_acceleration": "1000", "default_filament_profile": "\"Prusament PLA\"", "default_print_profile": "0.15mm QUALITY @MK3", "deretract_speed": "0", "disable_fan_first_layers": "1", "dont_support_bridges": "1", "draft_shield": "disabled", "duplicate_distance": "6", "elefant_foot_compensation": "0.2", "enable_dynamic_fan_speeds": "0", "enable_dynamic_overhang_speeds": "0", "end_filament_gcode": "\"; Filament-specific end gcode\"", "end_gcode": "{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\\nG1 X0 Y200 F3600 ; park\\n{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\\nG4 ; wait\\nM221 S100 ; reset flow\\nM900 K0 ; reset LA\\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heatbed\\nM107 ; turn off fan\\nM84 ; disable motors\\n; max_layer_z = [max_layer_z]", "ensure_vertical_shell_thickness": "enabled", "external_perimeter_acceleration": "0", "external_perimeter_extrusion_width": "0.45", "external_perimeter_speed": "25", "external_perimeters_first": "0", "extra_loading_move": "-2", "extra_perimeters": "0", "extra_perimeters_on_overhangs": "0", "extruder_clearance_height": "20", "extruder_clearance_radius": "45", "extruder_colour": "\"\"", "extruder_offset": "0x0", "extrusion_axis": "E", "extrusion_multiplier": "1", "extrusion_width": "0.45", "fan_always_on": "1", "fan_below_layer_time": "100", "filament_abrasive": "0", "filament_colour": "#FF8000", "filament_cooling_final_speed": "3.4", "filament_cooling_initial_speed": "2.2", "filament_cooling_moves": "4", "filament_cost": "25", "filament_density": "1.24", "filament_deretract_speed": "nil", "filament_diameter": "1.75", "filament_infill_max_crossing_speed": "0", "filament_infill_max_speed": "0", "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": "15", "filament_minimal_purge_on_wipe_tower": "15", "filament_multitool_ramming": "0", "filament_multitool_ramming_flow": "10", "filament_multitool_ramming_volume": "10", "filament_notes": "filament_type=Walami", "filament_purge_multiplier": "100%", "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", "filament_retract_before_travel": "nil", "filament_retract_before_wipe": "nil", "filament_retract_layer_change": "nil", "filament_retract_length": "nil", "filament_retract_length_toolchange": "nil", "filament_retract_lift": "nil", "filament_retract_lift_above": "nil", "filament_retract_lift_below": "nil", "filament_retract_restart_extra": "nil", "filament_retract_restart_extra_toolchange": "nil", "filament_retract_speed": "nil", "filament_seam_gap_distance": "nil", "filament_settings_id": "\"PLA - Real, Creality\"", "filament_shrinkage_compensation_xy": "0.2%", "filament_shrinkage_compensation_z": "0.25%", "filament_soluble": "0", "filament_spool_weight": "210", "filament_stamping_distance": "0", "filament_stamping_loading_speed": "20", "filament_toolchange_delay": "0", "filament_travel_lift_before_obstacle": "nil", "filament_travel_max_lift": "nil", "filament_travel_ramping_lift": "nil", "filament_travel_slope": "nil", "filament_type": "PLA", "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": "Generic", "filament_wipe": "nil", "fill_angle": "45", "fill_density": "10%", "fill_pattern": "gyroid", "first_layer_acceleration": "1000", "first_layer_acceleration_over_raft": "0", "first_layer_bed_temperature": "60", "first_layer_extrusion_width": "0.8", "first_layer_height": "0.3", "first_layer_infill_speed": "0", "first_layer_speed": "30%", "first_layer_speed_over_raft": "30", "first_layer_temperature": "215", "full_fan_speed_layer": "4", "fuzzy_skin": "none", "fuzzy_skin_point_dist": "0.8", "fuzzy_skin_thickness": "0.3", "gap_fill_enabled": "1", "gap_fill_speed": "40", "gcode_comments": "1", "gcode_flavor": "marlin", "gcode_label_objects": "octoprint", "gcode_resolution": "0.0125", "gcode_substitutions": "", "high_current_on_filament_swap": "0", "host_type": "prusalink", "idle_temperature": "nil", "infill_acceleration": "1000", "infill_anchor": "2.5", "infill_anchor_max": "12", "infill_every_layers": "1", "infill_extruder": "1", "infill_extrusion_width": "0.45", "infill_first": "0", "infill_overlap": "25%", "infill_speed": "80", "inherits_cummulative": "\"0.20mm QUALITY @MK3\";\"Generic PLA\";\"Original Prusa i3 MK3S & MK3S+\"", "interface_shells": "0", "interlocking_beam": "0", "interlocking_beam_layer_count": "2", "interlocking_beam_width": "0.8", "interlocking_boundary_avoidance": "2", "interlocking_depth": "2", "interlocking_orientation": "22.5", "ironing": "0", "ironing_flowrate": "15%", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "top", "layer_gcode": ";AFTER_LAYER_CHANGE\\n;[layer_z]\\n\\n@SNAPSHOT", "layer_height": "0.2", "machine_limits_usage": "emit_to_gcode", "machine_max_acceleration_e": "5000,5000", "machine_max_acceleration_extruding": "1250,1250", "machine_max_acceleration_retracting": "1250,1250", "machine_max_acceleration_travel": "1500,1250", "machine_max_acceleration_x": "1000,960", "machine_max_acceleration_y": "1000,960", "machine_max_acceleration_z": "200,200", "machine_max_feedrate_e": "120,120", "machine_max_feedrate_x": "200,100", "machine_max_feedrate_y": "200,100", "machine_max_feedrate_z": "12,12", "machine_max_jerk_e": "4.5,4.5", "machine_max_jerk_x": "8,8", "machine_max_jerk_y": "8,8", "machine_max_jerk_z": "0.4,0.4", "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "max_fan_speed": "100", "max_layer_height": "0.25", "max_print_height": "210", "max_print_speed": "200", "max_volumetric_extrusion_rate_slope_negative": "0", "max_volumetric_extrusion_rate_slope_positive": "0", "max_volumetric_speed": "0", "min_bead_width": "85%", "min_fan_speed": "100", "min_feature_size": "25%", "min_layer_height": "0.07", "min_print_speed": "15", "min_skirt_length": "4", "mmu_segmented_region_interlocking_depth": "0", "mmu_segmented_region_max_width": "0", "multimaterial_purging": "140", "notes": "", "nozzle_diameter": "0.4", "nozzle_high_flow": "0", "only_one_perimeter_first_layer": "0", "only_retract_when_crossing_perimeters": "0", "ooze_prevention": "0", "output_filename_format": "{input_filename_base}_{printing_filament_types}_{print_time}.gcode", "over_bridge_speed": "0", "overhang_fan_speed_0": "0", "overhang_fan_speed_1": "0", "overhang_fan_speed_2": "0", "overhang_fan_speed_3": "0", "overhang_speed_0": "15", "overhang_speed_1": "15", "overhang_speed_2": "20", "overhang_speed_3": "25", "overhangs": "1", "parking_pos_retraction": "92", "pause_print_gcode": "M601", "perimeter_acceleration": "800", "perimeter_extruder": "1", "perimeter_extrusion_width": "0.45", "perimeter_generator": "arachne", "perimeter_speed": "45", "perimeters": "2", "physical_printer_settings_id": "", "post_process": "", "prefer_clockwise_movements": "0", "print_settings_id": "0.20mm QUALITY 10% infill - PLA", "printer_model": "MK3S", "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\\nPRINTER_VENDOR_PRUSA3D\\nPRINTER_MODEL_MK3\\n", "printer_settings_id": "Original Prusa i3 MK3S & MK3S+ - defaults", "printer_technology": "FFF", "printer_variant": "0.4", "printer_vendor": "", "raft_contact_distance": "0.1", "raft_expansion": "1.5", "raft_first_layer_density": "90%", "raft_first_layer_expansion": "3", "raft_layers": "0", "remaining_times": "1", "resolution": "0", "retract_before_travel": "1", "retract_before_wipe": "0%", "retract_layer_change": "1", "retract_length": "0.8", "retract_length_toolchange": "4", "retract_lift": "0.4", "retract_lift_above": "0", "retract_lift_below": "209", "retract_restart_extra": "0", "retract_restart_extra_toolchange": "0", "retract_speed": "35", "scarf_seam_entire_loop": "0", "scarf_seam_length": "20", "scarf_seam_max_segment_length": "1", "scarf_seam_on_inner_perimeters": "0", "scarf_seam_only_on_smooth": "1", "scarf_seam_placement": "nowhere", "scarf_seam_start_height": "0%", "seam_gap_distance": "15%", "seam_position": "random", "silent_mode": "1", "single_extruder_multi_material": "0", "single_extruder_multi_material_priming": "0", "skirt_distance": "2", "skirt_height": "3", "skirts": "1", "slice_closing_radius": "0.049", "slicing_mode": "regular", "slowdown_below_layer_time": "12", "small_perimeter_speed": "25", "solid_infill_acceleration": "0", "solid_infill_below_area": "0", "solid_infill_every_layers": "0", "solid_infill_extruder": "1", "solid_infill_extrusion_width": "0.45", "solid_infill_speed": "80", "spiral_vase": "0", "staggered_inner_seams": "0", "standby_temperature_delta": "-5", "start_filament_gcode": "\"{if printer_notes!~/.*(MK3.5|MINIIS).*/}\\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0\\n{endif}\\n\\n{if printer_notes=~/.*MINIIS.*/}\\nM572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.27{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}\\n{endif}\\n\\n{if printer_notes=~/.*MK3.5.*/}\\nM572 S{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\\n{endif}\"", "start_gcode": "M862.3 P \"[printer_model]\" ; printer model check\\nM862.1 P[nozzle_diameter] ; nozzle diameter check\\nM115 U3.14.1 ; tell printer latest fw version\\nG90 ; use absolute coordinates\\nM83 ; extruder relative mode\\nM104 S[first_layer_temperature] ; set extruder temp\\nM140 S[first_layer_bed_temperature] ; set bed temp\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG28 W ; home all without mesh bed level\\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\\nG1 Z0.3 F720\\nG1 Y-3 F1000 ; go outside print area\\nG92 E0\\nG1 X60 E9 F1000 ; intro line\\nG1 X100 E9 F1000 ; intro line\\n{else}\\nG1 Z0.2 F720\\nG1 Y-3 F1000 ; go outside print area\\nG92 E0\\nG1 X60 E9 F1000 ; intro line\\nG1 X100 E12.5 F1000 ; intro line\\n{endif}\\nG92 E0\\nM221 S{if layer_height<0.075}100{else}95{endif}\\n\\n; Don't change E values below. Excessive value can damage the printer.\\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}", "support_material": "1", "support_material_angle": "0", "support_material_auto": "0", "support_material_bottom_contact_distance": "0", "support_material_bottom_interface_layers": "-1", "support_material_buildplate_only": "0", "support_material_closing_radius": "2", "support_material_contact_distance": "0.1", "support_material_enforce_layers": "0", "support_material_extruder": "0", "support_material_extrusion_width": "0.35", "support_material_interface_contact_loops": "0", "support_material_interface_extruder": "0", "support_material_interface_layers": "2", "support_material_interface_pattern": "rectilinear", "support_material_interface_spacing": "0.2", "support_material_interface_speed": "80%", "support_material_pattern": "rectilinear", "support_material_spacing": "2", "support_material_speed": "50", "support_material_style": "grid", "support_material_synchronize_layers": "0", "support_material_threshold": "55", "support_material_with_sheath": "0", "support_material_xy_spacing": "50%", "support_tree_angle": "40", "support_tree_angle_slow": "25", "support_tree_branch_diameter": "2", "support_tree_branch_diameter_angle": "5", "support_tree_branch_diameter_double_wall": "3", "support_tree_branch_distance": "1", "support_tree_tip_diameter": "0.8", "support_tree_top_rate": "15%", "temperature": "210", "template_custom_gcode": "", "thick_bridges": "1", "thin_walls": "0", "thumbnails": "160x120/PNG, 16x16/PNG, 200x200/PNG, 640x480/PNG, 800x600/PNG", "thumbnails_format": "PNG", "toolchange_gcode": "", "top_fill_pattern": "monotonic", "top_infill_extrusion_width": "0.4", "top_one_perimeter_type": "none", "top_solid_infill_acceleration": "0", "top_solid_infill_speed": "40", "top_solid_layers": "5", "top_solid_min_thickness": "0.7", "travel_acceleration": "0", "travel_lift_before_obstacle": "0", "travel_max_lift": "0", "travel_ramping_lift": "0", "travel_short_distance_acceleration": "0", "travel_slope": "0", "travel_speed": "180", "travel_speed_z": "0", "use_firmware_retraction": "0", "use_relative_e_distances": "1", "use_volumetric_e": "0", "variable_layer_height": "1", "wall_distribution_count": "1", "wall_transition_angle": "10", "wall_transition_filter_deviation": "25%", "wall_transition_length": "100%", "wipe": "1", "wipe_into_infill": "0", "wipe_into_objects": "0", "wipe_tower": "1", "wipe_tower_acceleration": "0", "wipe_tower_bridging": "10", "wipe_tower_brim_width": "2", "wipe_tower_cone_angle": "0", "wipe_tower_extra_flow": "100%", "wipe_tower_extra_spacing": "100%", "wipe_tower_extruder": "0", "wipe_tower_no_sparse_layers": "0", "wipe_tower_width": "60", "wiping_volumes_matrix": "0", "wiping_volumes_use_custom_matrix": "0", "xy_size_compensation": "0", "z_offset": "0" }It is correct, I can parse it in HA, all is good.
However, when the printing is finished/cancelled, another message gets sent to the same topic, which seems to be empty. I'm not sure the message is empty, because it does something to my MQTT broker, that I haven't ever seen before: it not only removes the topic (from MQTT Explorer, for example) - which I would expect from a retained message, but it also prevent HA to pick up the next published message when the next print starts.
This has the effect of HA never displaying the correct material type. If a print is ongoing and I restart HA, the retained message gets picked up normally, and it displays the filament type correctly.
Here is my sensor for reference only, as I don't think the problem lies there:
I've spent my last week end on investigating this, but this is all I came up with.
Any idea, what that message could be? Maybe a way of disabling that message at the end of printing?