Install not working on Kali 2.0

[RomanFire1]

root@kali:/Desktop# git clone https://github.com/OpenSecurityResearch/hostapd-wpe
Cloning into 'hostapd-wpe'...
remote: Counting objects: 51, done.
remote: Total 51 (delta 0), reused 0 (delta 0), pack-reused 51
Unpacking objects: 100% (51/51), done.
root@kali:/Desktop# apt-get update
Get:1 http://mirrors.ocf.berkeley.edu/kali kali-rolling InRelease [30.5 kB]
Get:2 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 Packages [15.1 MB]
Get:3 http://mirrors.ocf.berkeley.edu/kali kali-rolling/non-free amd64 Packages [165 kB]
Get:4 http://mirrors.ocf.berkeley.edu/kali kali-rolling/contrib amd64 Packages [108 kB]
Fetched 15.4 MB in 19s (794 kB/s)
Reading package lists... Done
root@kali:~/Desktop# apt-get install libssl-dev libnl-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libnl-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'libnl-dev' has no installation candidate
root@kali:/Desktop# apt-get install libssl-dev libnl-genl-3-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
gdebi-core iproute libcrypto++6 libjavascriptcoregtk-1.0-0 libladr4
libnm-gtk-common libqt4-opengl libqtwebkit4 libvpx3 libwebkitgtk-1.0-0
prover9 python-cluster python-darts.lib.utils.lru python-esmre python-git
python-gitdb python-guess-language python-halberd python-ipaddr
python-ndg-httpsclient python-nltk python-pdfminer python-phply python-ply
python-psutil python-pybloomfiltermmap python-pyclamd python-pycryptopp
python-pygithub python-ruamel.ordereddict python-smmap python-tblib
python-vulndb python-webkit python-xdot w3af w3af-console
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
libnl-3-200 libnl-3-dev libnl-genl-3-200 libnl-route-3-200 libssl-doc
libssl1.1
The following NEW packages will be installed:
libnl-3-dev libnl-genl-3-dev libssl-dev libssl-doc libssl1.1
The following packages will be upgraded:
libnl-3-200 libnl-genl-3-200 libnl-route-3-200
3 upgraded, 5 newly installed, 0 to remove and 883 not upgraded.
Need to get 3,333 kB/4,674 kB of archives.
After this operation, 15.8 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 libnl-route-3-200 amd64 3.2.27-1+b1 [136 kB]
Get:2 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 libnl-genl-3-200 amd64 3.2.27-1+b1 [21.2 kB]
Get:3 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 libnl-3-200 amd64 3.2.27-1+b1 [61.6 kB]
Get:4 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 libnl-3-dev amd64 3.2.27-1+b1 [96.5 kB]
Get:5 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 libnl-genl-3-dev amd64 3.2.27-1+b1 [20.4 kB]
Get:6 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 libssl-dev amd64 1.1.0e-1 [1,572 kB]
Get:7 http://mirrors.ocf.berkeley.edu/kali kali-rolling/main amd64 libssl-doc all 1.1.0e-1 [1,425 kB]
Fetched 3,333 kB in 3s (882 kB/s)
Reading changelogs... Done
Preconfiguring packages ...
Selecting previously unselected package libssl1.1:amd64.
(Reading database ... 317973 files and directories currently installed.)
Preparing to unpack .../0-libssl1.1_1.1.0e-1_amd64.deb ...
Unpacking libssl1.1:amd64 (1.1.0e-1) ...
Preparing to unpack .../1-libnl-route-3-200_3.2.27-1+b1_amd64.deb ...
Unpacking libnl-route-3-200:amd64 (3.2.27-1+b1) over (3.2.27-1) ...
Preparing to unpack .../2-libnl-genl-3-200_3.2.27-1+b1_amd64.deb ...
Unpacking libnl-genl-3-200:amd64 (3.2.27-1+b1) over (3.2.27-1) ...
Preparing to unpack .../3-libnl-3-200_3.2.27-1+b1_amd64.deb ...
Unpacking libnl-3-200:amd64 (3.2.27-1+b1) over (3.2.27-1) ...
Selecting previously unselected package libnl-3-dev:amd64.
Preparing to unpack .../4-libnl-3-dev_3.2.27-1+b1_amd64.deb ...
Unpacking libnl-3-dev:amd64 (3.2.27-1+b1) ...
Selecting previously unselected package libnl-genl-3-dev:amd64.
Preparing to unpack .../5-libnl-genl-3-dev_3.2.27-1+b1_amd64.deb ...
Unpacking libnl-genl-3-dev:amd64 (3.2.27-1+b1) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../6-libssl-dev_1.1.0e-1_amd64.deb ...
Unpacking libssl-dev:amd64 (1.1.0e-1) ...
Selecting previously unselected package libssl-doc.
Preparing to unpack .../7-libssl-doc_1.1.0e-1_all.deb ...
Unpacking libssl-doc (1.1.0e-1) ...
Processing triggers for libc-bin (2.24-9) ...
Setting up libssl1.1:amd64 (1.1.0e-1) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up libssl-doc (1.1.0e-1) ...
Setting up libnl-3-200:amd64 (3.2.27-1+b1) ...
Setting up libssl-dev:amd64 (1.1.0e-1) ...
Setting up libnl-3-dev:amd64 (3.2.27-1+b1) ...
Setting up libnl-genl-3-200:amd64 (3.2.27-1+b1) ...
Setting up libnl-route-3-200:amd64 (3.2.27-1+b1) ...
Setting up libnl-genl-3-dev:amd64 (3.2.27-1+b1) ...
Processing triggers for libc-bin (2.24-9) ...
root@kali:/Desktop# git clone https://github.com/OpenSecurityResearch/hostapd-wpe
fatal: destination path 'hostapd-wpe' already exists and is not an empty directory.
root@kali:/Desktop# sudo git clone https://github.com/OpenSecurityResearch/hostapd-wpe
fatal: destination path 'hostapd-wpe' already exists and is not an empty directory.
root@kali:/Desktop# wget http://hostap.epitest.fi/releases/hostapd-2.2.tar.gz
--2017-03-29 14:33:15-- http://hostap.epitest.fi/releases/hostapd-2.2.tar.gz
Resolving hostap.epitest.fi (hostap.epitest.fi)... 212.71.239.96
Connecting to hostap.epitest.fi (hostap.epitest.fi)|212.71.239.96|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://w1.fi/releases/hostapd-2.2.tar.gz [following]
--2017-03-29 14:33:16-- http://w1.fi/releases/hostapd-2.2.tar.gz
Resolving w1.fi (w1.fi)... 212.71.239.96
Reusing existing connection to hostap.epitest.fi:80.
HTTP request sent, awaiting response... 200 OK
Length: 1586482 (1.5M) [application/x-gzip]
Saving to: ‘hostapd-2.2.tar.gz’

hostapd-2.2.tar.gz 100%[===================>] 1.51M 321KB/s in 8.2s

2017-03-29 14:33:25 (188 KB/s) - ‘hostapd-2.2.tar.gz’ saved [1586482/1586482]

root@kali:/Desktop# tar -zxf hostapd-2.2.tar.gz
root@kali:/Desktop# cd hostapd-2.2
root@kali:/Desktop/hostapd-2.2# patch -p1 < ../hostapd-wpe/hostapd-wpe.patch
patching file hostapd/.config
patching file hostapd/config_file.c
patching file hostapd/hostapd-wpe.conf
patching file hostapd/hostapd-wpe.eap_user
patching file hostapd/main.c
patching file hostapd/Makefile
patching file src/ap/beacon.c
patching file src/ap/ieee802_11.c
patching file src/crypto/ms_funcs.c
patching file src/crypto/ms_funcs.h
patching file src/crypto/tls_openssl.c
patching file src/eap_server/eap_server.c
patching file src/eap_server/eap_server_mschapv2.c
patching file src/eap_server/eap_server_peap.c
patching file src/eap_server/eap_server_ttls.c
patching file src/Makefile
patching file src/utils/wpa_debug.c
patching file src/wpe/Makefile
patching file src/wpe/wpe.c
patching file src/wpe/wpe.h
root@kali:/Desktop/hostapd-2.2# cd hostapd
root@kali:/Desktop/hostapd-2.2/hostapd# ls
android.config hlr_auc_gw.milenage_db hostapd.wpa_psk
Android.mk hlr_auc_gw.txt hostapd-wpe.conf
ChangeLog hostapd.8 hostapd-wpe.eap_user
config_file.c hostapd.accept logwatch
config_file.h hostapd_cli.1 main.c
ctrl_iface.c hostapd_cli.c Makefile
ctrl_iface.h hostapd.conf nt_password_hash.c
defconfig hostapd.deny README
eap_register.c hostapd.eap_user README-WPS
eap_register.h hostapd.eap_user_sqlite wired.conf
eap_testing.txt hostapd.radius_clients wps-ap-nfc.py
hapd_module_tests.c hostapd.sim_db
hlr_auc_gw.c hostapd.vlan
root@kali:/Desktop/hostapd-2.2/hostapd# ls -a
. hapd_module_tests.c hostapd.vlan
.. hlr_auc_gw.c hostapd.wpa_psk
android.config hlr_auc_gw.milenage_db hostapd-wpe.conf
Android.mk hlr_auc_gw.txt hostapd-wpe.eap_user
ChangeLog hostapd.8 logwatch
.config hostapd.accept main.c
config_file.c hostapd_cli.1 Makefile
config_file.h hostapd_cli.c nt_password_hash.c
ctrl_iface.c hostapd.conf README
ctrl_iface.h hostapd.deny README-WPS
defconfig hostapd.eap_user wired.conf
eap_register.c hostapd.eap_user_sqlite wps-ap-nfc.py
eap_register.h hostapd.radius_clients
eap_testing.txt hostapd.sim_db
root@kali:/Desktop/hostapd-2.2/hostapd# vi .config
root@kali:/Desktop/hostapd-2.2/hostapd# make
CC main.c
CC config_file.c
CC ../src/ap/hostapd.c
CC ../src/ap/wpa_auth_glue.c
CC ../src/ap/drv_callbacks.c
CC ../src/ap/ap_drv_ops.c
CC ../src/ap/utils.c
CC ../src/ap/authsrv.c
CC ../src/ap/ieee802_1x.c
CC ../src/ap/ap_config.c
CC ../src/ap/eap_user_db.c
CC ../src/ap/ieee802_11_auth.c
CC ../src/ap/sta_info.c
CC ../src/ap/wpa_auth.c
CC ../src/ap/tkip_countermeasures.c
CC ../src/ap/ap_mlme.c
CC ../src/ap/wpa_auth_ie.c
CC ../src/ap/preauth_auth.c
CC ../src/ap/pmksa_cache_auth.c
CC ../src/ap/ieee802_11_shared.c
CC ../src/ap/beacon.c
../src/wpe/wpe.c: In function ‘wpe_hb_cb’:
../src/wpe/wpe.c:193:27: error: ‘TLS1_RT_HEARTBEAT’ undeclared (first use in this function)
if (v_content_type == TLS1_RT_HEARTBEAT) {
^~~~~~~~~~~~~~~~~
../src/wpe/wpe.c:193:27: note: each undeclared identifier is reported only once for each function it appears in
../src/wpe/wpe.c:195:14: error: dereferencing pointer to incomplete type ‘SSL {aka struct ssl_st}’
v_ssl->tlsext_hb_pending = 1;
^~
Makefile:892: recipe for target '../src/wpe/wpe.o' failed
make: *** [../src/wpe/wpe.o] Error 1
root@kali:/Desktop/hostapd-2.2/hostapd# cd ../../hostapd-wpe/certs
root@kali:/Desktop/hostapd-wpe/certs# ./bootstrap
openssl dhparam -out dh 1024
Generating DH parameters, 1024 bit long safe prime, generator 2
This is going to take a long time
.......................................+...+.............+.+............+............................+......................+....................................................................+....................+..........................................................+......+...................................................................+.................................................................+....+...................................................................................................................................................+..+...............................................................................................................+........................................+...........................................................................................................................+..+......................+.........................................................................................+......................+................................................+..............................................................................................+.................................................................................................................................................................................+................+..............................................+...............................+........................+...................................................+....................................................+...................................................................................................+......................+...+....................+.....+................+...........+..........+...................................................................................................................+...................+............................+............+....+............................................+.....+..................................++++++*
openssl req -new -out server.csr -keyout server.key -config ./server.cnf
Generating a 2048 bit RSA private key
.............................................................................................+++
.......................+++
writing new private key to 'server.key'

openssl req -new -x509 -keyout ca.key -out ca.pem
-days grep default_days ca.cnf | sed 's/.*=//;s/^ *//' -config ./ca.cnf
Generating a 2048 bit RSA private key
..........................+++
..................................................................................+++
writing new private key to 'ca.key'

openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr -key grep output_password ca.cnf | sed 's/.*=//;s/^ *//' -out server.crt -extensions xpserver_ext -extfile xpextensions -config ./server.cnf
Using configuration from ./server.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 1 (0x1)
Validity
Not Before: Mar 29 18:38:08 2017 GMT
Not After : Mar 29 18:38:08 2018 GMT
Subject:
countryName = FR
stateOrProvinceName = Radius
organizationName = Example Inc.
commonName = Example Server Certificate
emailAddress = admin@example.com
X509v3 extensions:
X509v3 Extended Key Usage:
TLS Web Server Authentication
Certificate is to be certified until Mar 29 18:38:08 2018 GMT (365 days)

Write out database with 1 new entries
Data Base Updated
openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin pass:grep output_password server.cnf | sed 's/.*=//;s/^ *//' -passout pass:grep output_password server.cnf | sed 's/.*=//;s/^ *//'
openssl pkcs12 -in server.p12 -out server.pem -passin pass:grep output_password server.cnf | sed 's/.*=//;s/^ *//' -passout pass:grep output_password server.cnf | sed 's/.*=//;s/^ *//'
MAC verified OK
openssl verify -CAfile ca.pem server.pem
server.pem: OK
openssl x509 -inform PEM -outform DER -in ca.pem -out ca.der
root@kali:/Desktop/hostapd-wpe/certs# cd ../../hostapd-2.2/hostapd
root@kali:/Desktop/hostapd-2.2/hostapd# sudo ./hostapd-wpe hostapd-wpe.conf
sudo: ./hostapd-wpe: command not found
root@kali:/Desktop/hostapd-2.2/hostapd# ls
android.config hlr_auc_gw.c hostapd.wpa_psk
Android.mk hlr_auc_gw.milenage_db hostapd-wpe.conf
ChangeLog hlr_auc_gw.txt hostapd-wpe.eap_user
config_file.c hostapd.8 logwatch
config_file.d hostapd.accept main.c
config_file.h hostapd_cli.1 main.d
config_file.o hostapd_cli.c main.o
ctrl_iface.c hostapd.conf Makefile
ctrl_iface.h hostapd.deny nt_password_hash.c
defconfig hostapd.eap_user README
eap_register.c hostapd.eap_user_sqlite README-WPS
eap_register.h hostapd.radius_clients wired.conf
eap_testing.txt hostapd.sim_db wps-ap-nfc.py
hapd_module_tests.c hostapd.vlan
root@kali:/Desktop/hostapd-2.2/hostapd# man make
root@kali:/Desktop/hostapd-2.2/hostapd# make -B
CC main.c
CC config_file.c
CC ../src/ap/hostapd.c
CC ../src/ap/wpa_auth_glue.c
CC ../src/ap/drv_callbacks.c
CC ../src/ap/ap_drv_ops.c
CC ../src/ap/utils.c
CC ../src/ap/authsrv.c
CC ../src/ap/ieee802_1x.c
CC ../src/ap/ap_config.c
CC ../src/ap/eap_user_db.c
CC ../src/ap/ieee802_11_auth.c
CC ../src/ap/sta_info.c
CC ../src/ap/wpa_auth.c
CC ../src/ap/tkip_countermeasures.c
CC ../src/ap/ap_mlme.c
CC ../src/ap/wpa_auth_ie.c
CC ../src/ap/preauth_auth.c
CC ../src/ap/pmksa_cache_auth.c
CC ../src/ap/ieee802_11_shared.c
CC ../src/ap/beacon.c
../src/wpe/wpe.c: In function ‘wpe_hb_cb’:
../src/wpe/wpe.c:193:27: error: ‘TLS1_RT_HEARTBEAT’ undeclared (first use in this function)
if (v_content_type == TLS1_RT_HEARTBEAT) {
^~~~~~~~~~~~~~~~~
../src/wpe/wpe.c:193:27: note: each undeclared identifier is reported only once for each function it appears in
../src/wpe/wpe.c:195:14: error: dereferencing pointer to incomplete type ‘SSL {aka struct ssl_st}’
v_ssl->tlsext_hb_pending = 1;
^
Makefile:892: recipe for target '../src/wpe/wpe.o' failed
make: *** [../src/wpe/wpe.o] Error 1
root@kali:/Desktop/hostapd-2.2/hostapd# man make
root@kali:/Desktop/hostapd-2.2/hostapd# make -Bi
CC main.c
CC config_file.c
CC ../src/ap/hostapd.c
CC ../src/ap/wpa_auth_glue.c
CC ../src/ap/drv_callbacks.c
CC ../src/ap/ap_drv_ops.c
CC ../src/ap/utils.c
CC ../src/ap/authsrv.c
CC ../src/ap/ieee802_1x.c
CC ../src/ap/ap_config.c
CC ../src/ap/eap_user_db.c
CC ../src/ap/ieee802_11_auth.c
CC ../src/ap/sta_info.c
CC ../src/ap/wpa_auth.c
CC ../src/ap/tkip_countermeasures.c
CC ../src/ap/ap_mlme.c
CC ../src/ap/wpa_auth_ie.c
CC ../src/ap/preauth_auth.c
CC ../src/ap/pmksa_cache_auth.c
CC ../src/ap/ieee802_11_shared.c
CC ../src/ap/beacon.c
../src/wpe/wpe.c: In function ‘wpe_hb_cb’:
../src/wpe/wpe.c:193:27: error: ‘TLS1_RT_HEARTBEAT’ undeclared (first use in this function)
if (v_content_type == TLS1_RT_HEARTBEAT) {
^~~~~~~~~~~~~~~~~
../src/wpe/wpe.c:193:27: note: each undeclared identifier is reported only once for each function it appears in
../src/wpe/wpe.c:195:14: error: dereferencing pointer to incomplete type ‘SSL {aka struct ssl_st}’
v_ssl->tlsext_hb_pending = 1;
^~
Makefile:892: recipe for target '../src/wpe/wpe.o' failed
make: [../src/wpe/wpe.o] Error 1 (ignored)
CC ../src/wpe/wpe.c
CC ../src/drivers/drivers.c
CC ../src/utils/eloop.c
CC ../src/utils/common.c
CC ../src/utils/wpa_debug.c
CC ../src/utils/wpabuf.c
CC ../src/utils/os_unix.c
CC ../src/utils/ip_addr.c
CC ../src/common/ieee802_11_common.c
CC ../src/common/wpa_common.c
CC ../src/eapol_auth/eapol_auth_sm.c
CC ../src/eapol_auth/eapol_auth_dump.c
CC ../src/radius/radius.c
CC ../src/radius/radius_client.c
CC ../src/radius/radius_das.c
CC ../src/ap/vlan_init.c
CC ctrl_iface.c
CC ../src/ap/ctrl_iface_ap.c
CC ../src/crypto/md5.c
CC ../src/ap/iapp.c
CC ../src/ap/peerkey_auth.c
CC ../src/drivers/driver_hostap.c
CC ../src/drivers/driver_wired.c
CC ../src/drivers/driver_nl80211.c
CC ../src/utils/radiotap.c
CC ../src/drivers/netlink.c
CC ../src/drivers/linux_ioctl.c
CC ../src/drivers/rfkill.c
CC ../src/l2_packet/l2_packet_linux.c
CC ../src/eap_server/eap_server_md5.c
CC ../src/eap_server/eap_server_tls.c
CC ../src/eap_server/eap_server_peap.c
CC ../src/eap_common/eap_peap_common.c
CC ../src/eap_server/eap_server_ttls.c
CC ../src/eap_server/eap_server_mschapv2.c
CC ../src/eap_server/eap_server_gtc.c
CC ../src/eap_server/eap_server_sim.c
CC ../src/eap_server/eap_server_aka.c
CC ../src/eap_common/eap_sim_common.c
CC ../src/eap_server/eap_sim_db.c
CC ../src/eap_server/eap_server_pax.c
CC ../src/eap_common/eap_pax_common.c
CC ../src/eap_server/eap_server_psk.c
CC ../src/eap_common/eap_psk_common.c
CC ../src/eap_server/eap_server_sake.c
CC ../src/eap_common/eap_sake_common.c
CC ../src/eap_server/eap_server_gpsk.c
CC ../src/eap_common/eap_gpsk_common.c
CC ../src/eap_server/eap_server_pwd.c
CC ../src/eap_common/eap_pwd_common.c
CC ../src/eap_server/eap_server_eke.c
CC ../src/eap_common/eap_eke_common.c
CC ../src/eap_server/eap_server_fast.c
CC ../src/eap_common/eap_fast_common.c
CC ../src/eap_server/eap_server_ikev2.c
CC ../src/eap_server/ikev2.c
CC ../src/eap_common/eap_ikev2_common.c
CC ../src/eap_common/ikev2_common.c
CC ../src/eap_server/eap_server_tnc.c
CC ../src/eap_server/tncs.c
CC eap_register.c
CC ../src/eap_server/eap_server.c
CC ../src/eap_common/eap_common.c
CC ../src/eap_server/eap_server_methods.c
CC ../src/eap_server/eap_server_identity.c
CC ../src/crypto/ms_funcs.c
CC ../src/eap_common/chap.c
CC ../src/eap_server/eap_server_tls_common.c
../src/crypto/tls_openssl.c: In function ‘tls_init’:
../src/crypto/tls_openssl.c:805:2: warning: ‘TLSv1_method’ is deprecated [-Wdeprecated-declarations]
ssl = SSL_CTX_new(TLSv1_method());
^~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/ssl.h:1596:1: note: declared here
DEPRECATEDIN_1_1_0(__owur const SSL_METHOD TLSv1_method(void)) / TLSv1.0 /
^
../src/crypto/tls_openssl.c: In function ‘tls_deinit’:
../src/crypto/tls_openssl.c:861:3: warning: ‘ERR_remove_state’ is deprecated [-Wdeprecated-declarations]
ERR_remove_state(0);
^~~~~~~~~~~~~~~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/err.h:247:1: note: declared here
DEPRECATEDIN_1_0_0(void ERR_remove_state(unsigned long pid))
^
../src/crypto/tls_openssl.c: In function ‘tls_load_ca_der’:
../src/crypto/tls_openssl.c:1530:40: error: dereferencing pointer to incomplete type ‘SSL_CTX {aka struct ssl_ctx_st}’
lookup = X509_STORE_add_lookup(ssl_ctx->cert_store,
^~
../src/crypto/tls_openssl.c: In function ‘tls_connection_get_keys’:
../src/crypto/tls_openssl.c:2522:24: error: dereferencing pointer to incomplete type ‘SSL {aka struct ssl_st}’
if (ssl == NULL || ssl->s3 == NULL || ssl->session == NULL)
^~
../src/crypto/tls_openssl.c: In function ‘tls_connection_encrypt’:
../src/crypto/tls_openssl.c:2755:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (wpe_conf.wpe_enable_cupid && wpe_conf.wpe_hb_send_before_appdata)
^~
../src/crypto/tls_openssl.c:2758:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
res = SSL_write(conn->ssl, wpabuf_head(in_data), wpabuf_len(in_data));
^~~
../src/crypto/tls_openssl.c:2765:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (wpe_conf.wpe_enable_cupid && wpe_conf.wpe_hb_send_after_appdata)
^~
../src/crypto/tls_openssl.c:2770:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
buf = wpabuf_alloc(wpabuf_len(in_data) + 300);
^~~
../src/crypto/tls_openssl.c: In function ‘tls_connection_set_session_ticket_cb’:
../src/crypto/tls_openssl.c:3547:44: warning: passing argument 2 of ‘SSL_set_session_secret_cb’ from incompatible pointer type [-Wincompatible-pointer-types]
if (SSL_set_session_secret_cb(conn->ssl, tls_sess_sec_cb,
^~~~~~~~~~~~~~~
In file included from ../src/crypto/tls_openssl.c:19:0:
/usr/include/openssl/ssl.h:1801:12: note: expected ‘tls_session_secret_cb_fn {aka int ()(struct ssl_st *, void *, int *, struct stack_st_SSL_CIPHER *, const struct ssl_cipher_st **, void )}’ but argument is of type ‘int ()(SSL *, void *, int *, struct stack_st_SSL_CIPHER *, SSL_CIPHER **, void ) {aka int ()(struct ssl_st *, void *, int *, struct stack_st_SSL_CIPHER *, struct ssl_cipher_st **, void *)}’
__owur int SSL_set_session_secret_cb(SSL *s,
^~~~~~~~~~~~~~~~~~~~~~~~~
../src/crypto/tls_openssl.c: In function ‘wpe_hb_enc’:
../src/crypto/tls_openssl.c:3595:39: error: ‘SSL_TLSEXT_HB_ENABLED’ undeclared (first use in this function)
if(!conn->ssl->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED ||
^~~~~~~~~~~~~~~~~~~~~
../src/crypto/tls_openssl.c:3595:39: note: each undeclared identifier is reported only once for each function it appears in
../src/crypto/tls_openssl.c:3596:43: error: ‘SSL_TLSEXT_HB_DONT_SEND_REQUESTS’ undeclared (first use in this function)
conn->ssl->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_SEND_REQUESTS) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/crypto/tls_openssl.c:32:0:
/root/Desktop/hostapd-2.2/src/wpe/wpe.h:42:56: warning: left-hand operand of comma expression has no effect [-Wunused-value]
#define s2n(s,c) ((c[0]=(unsigned char)(((s)>> 8)&0xff),
^
../src/crypto/tls_openssl.c:3623:5: note: in expansion of macro ‘s2n’
s2n(conn->ssl->tlsext_hb_seq, p);
^~~
/root/Desktop/hostapd-2.2/src/wpe/wpe.h:43:46: warning: left-hand operand of comma expression has no effect [-Wunused-value]
c[1]=(unsigned char)(((s) )&0xff)),c+=2)
^
../src/crypto/tls_openssl.c:3623:5: note: in expansion of macro ‘s2n’
s2n(conn->ssl->tlsext_hb_seq, p);
^~~
../src/crypto/tls_openssl.c:3625:5: warning: ‘RAND_pseudo_bytes’ is deprecated [-Wdeprecated-declarations]
RAND_pseudo_bytes(p, 16);
^~~~~~~~~~~~~~~~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/rand.h:47:1: note: declared here
DEPRECATEDIN_1_1_0(int RAND_pseudo_bytes(unsigned char *buf, int num))
^
../src/crypto/tls_openssl.c:3629:5: warning: ‘RAND_pseudo_bytes’ is deprecated [-Wdeprecated-declarations]
RAND_pseudo_bytes(p, padding);
^~~~~~~~~~~~~~~~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/rand.h:47:1: note: declared here
DEPRECATEDIN_1_1_0(int RAND_pseudo_bytes(unsigned char *buf, int num))
^
../src/crypto/tls_openssl.c:3636:38: error: dereferencing pointer to incomplete type ‘SSL_METHOD {aka const struct ssl_method_st}’
if (SSL_get_ssl_method(conn->ssl)->ssl_write_bytes(conn->ssl, TLS1_RT_HEARTBEAT,
^~
../src/crypto/tls_openssl.c:3636:67: error: ‘TLS1_RT_HEARTBEAT’ undeclared (first use in this function)
if (SSL_get_ssl_method(conn->ssl)->ssl_write_bytes(conn->ssl, TLS1_RT_HEARTBEAT,
^~~~~~~~~~~~~~~~~
../src/crypto/tls_openssl.c: In function ‘tls_connection_resumed’:
../src/crypto/tls_openssl.c:2838:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Makefile:892: recipe for target '../src/crypto/tls_openssl.o' failed
make: [../src/crypto/tls_openssl.o] Error 1 (ignored)
CC ../src/crypto/tls_openssl.c
../src/crypto/crypto_openssl.c: In function ‘openssl_digest_vector’:
../src/crypto/crypto_openssl.c:84:13: error: storage size of ‘ctx’ isn’t known
EVP_MD_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:84:13: warning: unused variable ‘ctx’ [-Wunused-variable]
../src/crypto/crypto_openssl.c: In function ‘rc4_skip’:
../src/crypto/crypto_openssl.c:145:17: error: storage size of ‘ctx’ isn’t known
EVP_CIPHER_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:145:17: warning: unused variable ‘ctx’ [-Wunused-variable]
In file included from /root/Desktop/hostapd-2.2/src/utils/common.h:12:0,
from ../src/crypto/crypto_openssl.c:26:
../src/crypto/crypto_openssl.c: In function ‘aes_encrypt_init’:
../src/crypto/crypto_openssl.c:221:25: error: dereferencing pointer to incomplete type ‘EVP_CIPHER_CTX {aka struct evp_cipher_ctx_st}’
ctx = os_malloc(sizeof(*ctx));
^~
/root/Desktop/hostapd-2.2/src/utils/os.h:478:30: note: in definition of macro ‘os_malloc’
#define os_malloc(s) malloc((s))
^
../src/crypto/crypto_openssl.c: At top level:
../src/crypto/crypto_openssl.c:353:17: error: field ‘enc’ has incomplete type
EVP_CIPHER_CTX enc;
^~~
../src/crypto/crypto_openssl.c:354:17: error: field ‘dec’ has incomplete type
EVP_CIPHER_CTX dec;
^~~
../src/crypto/crypto_openssl.c: In function ‘dh5_init’:
../src/crypto/crypto_openssl.c:478:4: error: dereferencing pointer to incomplete type ‘DH {aka struct dh_st}’
dh->g = BN_new();
^~
../src/crypto/crypto_openssl.c: At top level:
../src/crypto/crypto_openssl.c:596:11: error: field ‘ctx’ has incomplete type
HMAC_CTX ctx;
^~~
../src/crypto/crypto_openssl.c: In function ‘crypto_hash_init’:
../src/crypto/crypto_openssl.c:631:2: warning: implicit declaration of function ‘HMAC_CTX_init’ [-Wimplicit-function-declaration]
HMAC_CTX_init(&ctx->ctx);
^~~~~~~~~~~~~
../src/crypto/crypto_openssl.c: In function ‘crypto_hash_finish’:
../src/crypto/crypto_openssl.c:674:2: warning: implicit declaration of function ‘HMAC_CTX_cleanup’ [-Wimplicit-function-declaration]
HMAC_CTX_cleanup(&ctx->ctx);
^~~~~~~~~~~~~~~~
../src/crypto/crypto_openssl.c: In function ‘hmac_sha1_vector’:
../src/crypto/crypto_openssl.c:706:11: error: storage size of ‘ctx’ isn’t known
HMAC_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:706:11: warning: unused variable ‘ctx’ [-Wunused-variable]
../src/crypto/crypto_openssl.c: In function ‘hmac_sha256_vector’:
../src/crypto/crypto_openssl.c:747:11: error: storage size of ‘ctx’ isn’t known
HMAC_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:747:11: warning: unused variable ‘ctx’ [-Wunused-variable]
Makefile:892: recipe for target '../src/crypto/crypto_openssl.o' failed
make: [../src/crypto/crypto_openssl.o] Error 1 (ignored)
CC ../src/crypto/crypto_openssl.c
CC ../src/crypto/fips_prf_openssl.c
CC ../src/crypto/aes-wrap.c
CC ../src/crypto/aes-eax.c
CC ../src/crypto/aes-ctr.c
CC ../src/crypto/aes-encblock.c
CC ../src/crypto/aes-omac1.c
CC ../src/crypto/aes-unwrap.c
CC ../src/crypto/aes-cbc.c
CC ../src/crypto/sha1-prf.c
CC ../src/crypto/sha1-tprf.c
CC ../src/crypto/sha1-tlsprf.c
CC ../src/crypto/sha256-prf.c
CC ../src/crypto/dh_groups.c
CC ../src/crypto/random.c
CC ../src/radius/radius_server.c
CC ../src/utils/base64.c
CC ../src/ap/wmm.c
CC ../src/ap/ap_list.c
CC ../src/ap/ieee802_11.c
CC ../src/ap/hw_features.c
CC ../src/ap/dfs.c
CC ../src/drivers/driver_common.c
cc: error: ../src/wpe/wpe.o: No such file or directory
cc: error: ../src/crypto/tls_openssl.o: No such file or directory
cc: error: ../src/crypto/crypto_openssl.o: No such file or directory
Makefile:918: recipe for target 'hostapd-wpe' failed
make: [hostapd-wpe] Error 1 (ignored)
LD hostapd-wpe
CC hostapd_cli.c
CC ../src/common/wpa_ctrl.c
CC ../src/utils/edit_simple.c
LD hostapd-wpe_cli
root@kali:/Desktop/hostapd-2.2/hostapd# sudo ./hostapd-wpe hostapd-wpe.conf
sudo: ./hostapd-wpe: command not found
root@kali:/Desktop/hostapd-2.2/hostapd# ls
android.config eap_testing.txt hostapd.sim_db
Android.mk hapd_module_tests.c hostapd.vlan
ChangeLog hlr_auc_gw.c hostapd.wpa_psk
config_file.c hlr_auc_gw.milenage_db hostapd-wpe_cli
config_file.d hlr_auc_gw.txt hostapd-wpe.conf
config_file.h hostapd.8 hostapd-wpe.eap_user
config_file.o hostapd.accept logwatch
ctrl_iface.c hostapd_cli.1 main.c
ctrl_iface.d hostapd_cli.c main.d
ctrl_iface.h hostapd_cli.d main.o
ctrl_iface.o hostapd_cli.o Makefile
defconfig hostapd.conf nt_password_hash.c
eap_register.c hostapd.deny README
eap_register.d hostapd.eap_user README-WPS
eap_register.h hostapd.eap_user_sqlite wired.conf
eap_register.o hostapd.radius_clients wps-ap-nfc.py
root@kali:/Desktop/hostapd-2.2/hostapd# sudo ./hostapd-wpe_cli hostapd-wpe.conf
Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
root@kali:/Desktop/hostapd-2.2/hostapd# make -Bi
CC main.c
CC config_file.c
CC ../src/ap/hostapd.c
CC ../src/ap/wpa_auth_glue.c
CC ../src/ap/drv_callbacks.c
CC ../src/ap/ap_drv_ops.c
CC ../src/ap/utils.c
CC ../src/ap/authsrv.c
CC ../src/ap/ieee802_1x.c
CC ../src/ap/ap_config.c
CC ../src/ap/eap_user_db.c
CC ../src/ap/ieee802_11_auth.c
CC ../src/ap/sta_info.c
CC ../src/ap/wpa_auth.c
CC ../src/ap/tkip_countermeasures.c
CC ../src/ap/ap_mlme.c
CC ../src/ap/wpa_auth_ie.c
CC ../src/ap/preauth_auth.c
CC ../src/ap/pmksa_cache_auth.c
CC ../src/ap/ieee802_11_shared.c
CC ../src/ap/beacon.c
../src/wpe/wpe.c: In function ‘wpe_hb_cb’:
../src/wpe/wpe.c:193:27: error: ‘TLS1_RT_HEARTBEAT’ undeclared (first use in this function)
if (v_content_type == TLS1_RT_HEARTBEAT) {
^~~~~~~~~~~~~~~~~
../src/wpe/wpe.c:193:27: note: each undeclared identifier is reported only once for each function it appears in
../src/wpe/wpe.c:195:14: error: dereferencing pointer to incomplete type ‘SSL {aka struct ssl_st}’
v_ssl->tlsext_hb_pending = 1;
^~
Makefile:892: recipe for target '../src/wpe/wpe.o' failed
make: [../src/wpe/wpe.o] Error 1 (ignored)
CC ../src/wpe/wpe.c
CC ../src/drivers/drivers.c
CC ../src/utils/eloop.c
CC ../src/utils/common.c
CC ../src/utils/wpa_debug.c
CC ../src/utils/wpabuf.c
CC ../src/utils/os_unix.c
CC ../src/utils/ip_addr.c
CC ../src/common/ieee802_11_common.c
CC ../src/common/wpa_common.c
CC ../src/eapol_auth/eapol_auth_sm.c
CC ../src/eapol_auth/eapol_auth_dump.c
CC ../src/radius/radius.c
CC ../src/radius/radius_client.c
CC ../src/radius/radius_das.c
CC ../src/ap/vlan_init.c
CC ctrl_iface.c
CC ../src/ap/ctrl_iface_ap.c
CC ../src/crypto/md5.c
CC ../src/ap/iapp.c
CC ../src/ap/peerkey_auth.c
CC ../src/drivers/driver_hostap.c
CC ../src/drivers/driver_wired.c
CC ../src/drivers/driver_nl80211.c
CC ../src/utils/radiotap.c
CC ../src/drivers/netlink.c
CC ../src/drivers/linux_ioctl.c
CC ../src/drivers/rfkill.c
CC ../src/l2_packet/l2_packet_linux.c
CC ../src/eap_server/eap_server_md5.c
CC ../src/eap_server/eap_server_tls.c
CC ../src/eap_server/eap_server_peap.c
CC ../src/eap_common/eap_peap_common.c
CC ../src/eap_server/eap_server_ttls.c
CC ../src/eap_server/eap_server_mschapv2.c
CC ../src/eap_server/eap_server_gtc.c
CC ../src/eap_server/eap_server_sim.c
CC ../src/eap_server/eap_server_aka.c
CC ../src/eap_common/eap_sim_common.c
CC ../src/eap_server/eap_sim_db.c
CC ../src/eap_server/eap_server_pax.c
CC ../src/eap_common/eap_pax_common.c
CC ../src/eap_server/eap_server_psk.c
CC ../src/eap_common/eap_psk_common.c
CC ../src/eap_server/eap_server_sake.c
CC ../src/eap_common/eap_sake_common.c
CC ../src/eap_server/eap_server_gpsk.c
CC ../src/eap_common/eap_gpsk_common.c
CC ../src/eap_server/eap_server_pwd.c
CC ../src/eap_common/eap_pwd_common.c
CC ../src/eap_server/eap_server_eke.c
CC ../src/eap_common/eap_eke_common.c
CC ../src/eap_server/eap_server_fast.c
CC ../src/eap_common/eap_fast_common.c
CC ../src/eap_server/eap_server_ikev2.c
CC ../src/eap_server/ikev2.c
CC ../src/eap_common/eap_ikev2_common.c
CC ../src/eap_common/ikev2_common.c
CC ../src/eap_server/eap_server_tnc.c
CC ../src/eap_server/tncs.c
CC eap_register.c
CC ../src/eap_server/eap_server.c
CC ../src/eap_common/eap_common.c
CC ../src/eap_server/eap_server_methods.c
CC ../src/eap_server/eap_server_identity.c
CC ../src/crypto/ms_funcs.c
CC ../src/eap_common/chap.c
CC ../src/eap_server/eap_server_tls_common.c
../src/crypto/tls_openssl.c: In function ‘tls_init’:
../src/crypto/tls_openssl.c:805:2: warning: ‘TLSv1_method’ is deprecated [-Wdeprecated-declarations]
ssl = SSL_CTX_new(TLSv1_method());
^~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/ssl.h:1596:1: note: declared here
DEPRECATEDIN_1_1_0(__owur const SSL_METHOD TLSv1_method(void)) / TLSv1.0 /
^
../src/crypto/tls_openssl.c: In function ‘tls_deinit’:
../src/crypto/tls_openssl.c:861:3: warning: ‘ERR_remove_state’ is deprecated [-Wdeprecated-declarations]
ERR_remove_state(0);
^~~~~~~~~~~~~~~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/err.h:247:1: note: declared here
DEPRECATEDIN_1_0_0(void ERR_remove_state(unsigned long pid))
^
../src/crypto/tls_openssl.c: In function ‘tls_load_ca_der’:
../src/crypto/tls_openssl.c:1530:40: error: dereferencing pointer to incomplete type ‘SSL_CTX {aka struct ssl_ctx_st}’
lookup = X509_STORE_add_lookup(ssl_ctx->cert_store,
^~
../src/crypto/tls_openssl.c: In function ‘tls_connection_get_keys’:
../src/crypto/tls_openssl.c:2522:24: error: dereferencing pointer to incomplete type ‘SSL {aka struct ssl_st}’
if (ssl == NULL || ssl->s3 == NULL || ssl->session == NULL)
^~
../src/crypto/tls_openssl.c: In function ‘tls_connection_encrypt’:
../src/crypto/tls_openssl.c:2755:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (wpe_conf.wpe_enable_cupid && wpe_conf.wpe_hb_send_before_appdata)
^~
../src/crypto/tls_openssl.c:2758:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
res = SSL_write(conn->ssl, wpabuf_head(in_data), wpabuf_len(in_data));
^~~
../src/crypto/tls_openssl.c:2765:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (wpe_conf.wpe_enable_cupid && wpe_conf.wpe_hb_send_after_appdata)
^~
../src/crypto/tls_openssl.c:2770:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
buf = wpabuf_alloc(wpabuf_len(in_data) + 300);
^~~
../src/crypto/tls_openssl.c: In function ‘tls_connection_set_session_ticket_cb’:
../src/crypto/tls_openssl.c:3547:44: warning: passing argument 2 of ‘SSL_set_session_secret_cb’ from incompatible pointer type [-Wincompatible-pointer-types]
if (SSL_set_session_secret_cb(conn->ssl, tls_sess_sec_cb,
^~~~~~~~~~~~~~~
In file included from ../src/crypto/tls_openssl.c:19:0:
/usr/include/openssl/ssl.h:1801:12: note: expected ‘tls_session_secret_cb_fn {aka int ()(struct ssl_st *, void *, int *, struct stack_st_SSL_CIPHER *, const struct ssl_cipher_st **, void )}’ but argument is of type ‘int ()(SSL *, void *, int *, struct stack_st_SSL_CIPHER *, SSL_CIPHER **, void ) {aka int ()(struct ssl_st *, void *, int *, struct stack_st_SSL_CIPHER *, struct ssl_cipher_st **, void *)}’
__owur int SSL_set_session_secret_cb(SSL *s,
^~~~~~~~~~~~~~~~~~~~~~~~~
../src/crypto/tls_openssl.c: In function ‘wpe_hb_enc’:
../src/crypto/tls_openssl.c:3595:39: error: ‘SSL_TLSEXT_HB_ENABLED’ undeclared (first use in this function)
if(!conn->ssl->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED ||
^~~~~~~~~~~~~~~~~~~~~
../src/crypto/tls_openssl.c:3595:39: note: each undeclared identifier is reported only once for each function it appears in
../src/crypto/tls_openssl.c:3596:43: error: ‘SSL_TLSEXT_HB_DONT_SEND_REQUESTS’ undeclared (first use in this function)
conn->ssl->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_SEND_REQUESTS) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/crypto/tls_openssl.c:32:0:
/root/Desktop/hostapd-2.2/src/wpe/wpe.h:42:56: warning: left-hand operand of comma expression has no effect [-Wunused-value]
#define s2n(s,c) ((c[0]=(unsigned char)(((s)>> 8)&0xff),
^
../src/crypto/tls_openssl.c:3623:5: note: in expansion of macro ‘s2n’
s2n(conn->ssl->tlsext_hb_seq, p);
^~~
/root/Desktop/hostapd-2.2/src/wpe/wpe.h:43:46: warning: left-hand operand of comma expression has no effect [-Wunused-value]
c[1]=(unsigned char)(((s) )&0xff)),c+=2)
^
../src/crypto/tls_openssl.c:3623:5: note: in expansion of macro ‘s2n’
s2n(conn->ssl->tlsext_hb_seq, p);
^~~
../src/crypto/tls_openssl.c:3625:5: warning: ‘RAND_pseudo_bytes’ is deprecated [-Wdeprecated-declarations]
RAND_pseudo_bytes(p, 16);
^~~~~~~~~~~~~~~~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/rand.h:47:1: note: declared here
DEPRECATEDIN_1_1_0(int RAND_pseudo_bytes(unsigned char *buf, int num))
^
../src/crypto/tls_openssl.c:3629:5: warning: ‘RAND_pseudo_bytes’ is deprecated [-Wdeprecated-declarations]
RAND_pseudo_bytes(p, padding);
^~~~~~~~~~~~~~~~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from ../src/crypto/tls_openssl.c:19:
/usr/include/openssl/rand.h:47:1: note: declared here
DEPRECATEDIN_1_1_0(int RAND_pseudo_bytes(unsigned char *buf, int num))
^
../src/crypto/tls_openssl.c:3636:38: error: dereferencing pointer to incomplete type ‘SSL_METHOD {aka const struct ssl_method_st}’
if (SSL_get_ssl_method(conn->ssl)->ssl_write_bytes(conn->ssl, TLS1_RT_HEARTBEAT,
^~
../src/crypto/tls_openssl.c:3636:67: error: ‘TLS1_RT_HEARTBEAT’ undeclared (first use in this function)
if (SSL_get_ssl_method(conn->ssl)->ssl_write_bytes(conn->ssl, TLS1_RT_HEARTBEAT,
^~~~~~~~~~~~~~~~~
../src/crypto/tls_openssl.c: In function ‘tls_connection_resumed’:
../src/crypto/tls_openssl.c:2838:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Makefile:892: recipe for target '../src/crypto/tls_openssl.o' failed
make: [../src/crypto/tls_openssl.o] Error 1 (ignored)
CC ../src/crypto/tls_openssl.c
../src/crypto/crypto_openssl.c: In function ‘openssl_digest_vector’:
../src/crypto/crypto_openssl.c:84:13: error: storage size of ‘ctx’ isn’t known
EVP_MD_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:84:13: warning: unused variable ‘ctx’ [-Wunused-variable]
../src/crypto/crypto_openssl.c: In function ‘rc4_skip’:
../src/crypto/crypto_openssl.c:145:17: error: storage size of ‘ctx’ isn’t known
EVP_CIPHER_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:145:17: warning: unused variable ‘ctx’ [-Wunused-variable]
In file included from /root/Desktop/hostapd-2.2/src/utils/common.h:12:0,
from ../src/crypto/crypto_openssl.c:26:
../src/crypto/crypto_openssl.c: In function ‘aes_encrypt_init’:
../src/crypto/crypto_openssl.c:221:25: error: dereferencing pointer to incomplete type ‘EVP_CIPHER_CTX {aka struct evp_cipher_ctx_st}’
ctx = os_malloc(sizeof(*ctx));
^~
/root/Desktop/hostapd-2.2/src/utils/os.h:478:30: note: in definition of macro ‘os_malloc’
#define os_malloc(s) malloc((s))
^
../src/crypto/crypto_openssl.c: At top level:
../src/crypto/crypto_openssl.c:353:17: error: field ‘enc’ has incomplete type
EVP_CIPHER_CTX enc;
^~~
../src/crypto/crypto_openssl.c:354:17: error: field ‘dec’ has incomplete type
EVP_CIPHER_CTX dec;
^~~
../src/crypto/crypto_openssl.c: In function ‘dh5_init’:
../src/crypto/crypto_openssl.c:478:4: error: dereferencing pointer to incomplete type ‘DH {aka struct dh_st}’
dh->g = BN_new();
^~
../src/crypto/crypto_openssl.c: At top level:
../src/crypto/crypto_openssl.c:596:11: error: field ‘ctx’ has incomplete type
HMAC_CTX ctx;
^~~
../src/crypto/crypto_openssl.c: In function ‘crypto_hash_init’:
../src/crypto/crypto_openssl.c:631:2: warning: implicit declaration of function ‘HMAC_CTX_init’ [-Wimplicit-function-declaration]
HMAC_CTX_init(&ctx->ctx);
^~~~~~~~~~~~~
../src/crypto/crypto_openssl.c: In function ‘crypto_hash_finish’:
../src/crypto/crypto_openssl.c:674:2: warning: implicit declaration of function ‘HMAC_CTX_cleanup’ [-Wimplicit-function-declaration]
HMAC_CTX_cleanup(&ctx->ctx);
^~~~~~~~~~~~~~~~
../src/crypto/crypto_openssl.c: In function ‘hmac_sha1_vector’:
../src/crypto/crypto_openssl.c:706:11: error: storage size of ‘ctx’ isn’t known
HMAC_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:706:11: warning: unused variable ‘ctx’ [-Wunused-variable]
../src/crypto/crypto_openssl.c: In function ‘hmac_sha256_vector’:
../src/crypto/crypto_openssl.c:747:11: error: storage size of ‘ctx’ isn’t known
HMAC_CTX ctx;
^~~
../src/crypto/crypto_openssl.c:747:11: warning: unused variable ‘ctx’ [-Wunused-variable]
Makefile:892: recipe for target '../src/crypto/crypto_openssl.o' failed
make: [../src/crypto/crypto_openssl.o] Error 1 (ignored)
CC ../src/crypto/crypto_openssl.c
CC ../src/crypto/fips_prf_openssl.c
CC ../src/crypto/aes-wrap.c
CC ../src/crypto/aes-eax.c
CC ../src/crypto/aes-ctr.c
CC ../src/crypto/aes-encblock.c
CC ../src/crypto/aes-omac1.c
CC ../src/crypto/aes-unwrap.c
CC ../src/crypto/aes-cbc.c
CC ../src/crypto/sha1-prf.c
CC ../src/crypto/sha1-tprf.c
CC ../src/crypto/sha1-tlsprf.c
CC ../src/crypto/sha256-prf.c
CC ../src/crypto/dh_groups.c
CC ../src/crypto/random.c
CC ../src/radius/radius_server.c
CC ../src/utils/base64.c
CC ../src/ap/wmm.c
CC ../src/ap/ap_list.c
CC ../src/ap/ieee802_11.c
CC ../src/ap/hw_features.c
CC ../src/ap/dfs.c
CC ../src/drivers/driver_common.c
cc: error: ../src/wpe/wpe.o: No such file or directory
cc: error: ../src/crypto/tls_openssl.o: No such file or directory
cc: error: ../src/crypto/crypto_openssl.o: No such file or directory
Makefile:918: recipe for target 'hostapd-wpe' failed
make: [hostapd-wpe] Error 1 (ignored)
LD hostapd-wpe
CC hostapd_cli.c
CC ../src/common/wpa_ctrl.c
CC ../src/utils/edit_simple.c
LD hostapd-wpe_cli
root@kali:~/Desktop/hostapd-2.2/hostapd#

[lanrat]

I resolved this issue as per #1 (comment) :

apt-get install libssl1.0-dev

[ricardojoserf]

@lanrat i love you mighty rat man!