You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository was archived by the owner on Jul 16, 2024. It is now read-only.
Copy file name to clipboardExpand all lines: source/docs/installation/sw_install/gloworm.rst
+1-1
Original file line number
Diff line number
Diff line change
@@ -18,7 +18,7 @@ Select the compute module. If it doesn't show up after 30s try using another USB
18
18
19
19
Hit flash. Wait for flashing to complete, then disconnect your USB C cable.
20
20
21
-
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Gloworm. Updating to the latest Balena Etcher will fix this issue.
21
+
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Gloworm. Updating to 1.18.11 will fix this issue.
Copy file name to clipboardExpand all lines: source/docs/installation/sw_install/orange-pi.rst
+1-1
Original file line number
Diff line number
Diff line change
@@ -16,7 +16,7 @@ Use the 1.18.11 version of `Balena Etcher <https://github.com/balena-io/etcher/r
16
16
17
17
For more detailed instructions on using Etcher, please see the `Etcher website <https://www.balena.io/etcher/>`_.
18
18
19
-
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Orange Pi. Updating to the latest Balena Etcher will fix this issue.
19
+
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Orange Pi. Updating to 1.18.11 will fix this issue.
20
20
21
21
.. note:: If you are working on Linux, "dd" can be used in the command line to flash an image.
Copy file name to clipboardExpand all lines: source/docs/installation/sw_install/raspberry-pi.rst
+1-1
Original file line number
Diff line number
Diff line change
@@ -16,7 +16,7 @@ Use the 1.18.11 version of `Balena Etcher <https://github.com/balena-io/etcher/r
16
16
17
17
For more detailed instructions on using Etcher, please see the `Etcher website <https://www.balena.io/etcher/>`_.
18
18
19
-
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Raspberry Pi. Updating to the latest Balena Etcher will fix this issue.
19
+
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Raspberry Pi. Updating to 1.18.11 will fix this issue.
20
20
21
21
If you are using a non-standard Pi Camera connected to the CSI port, :ref:`additional configuration may be required. <docs/hardware/picamconfig:Pi Camera Configuration>`
Copy file name to clipboardExpand all lines: source/docs/installation/sw_install/snakeyes.rst
+1-1
Original file line number
Diff line number
Diff line change
@@ -14,7 +14,7 @@ Use the 1.18.11 version of `Balena Etcher <https://github.com/balena-io/etcher/r
14
14
15
15
For more detailed instructions on using Etcher, please see the `Etcher website <https://www.balena.io/etcher/>`_.
16
16
17
-
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Raspberry Pi. Updating to the latest Balena Etcher will fix this issue.
17
+
.. warning:: Using a version of Balena Etcher older than 1.18.11 may cause bootlooping (the system will repeatedly boot and restart) when imaging your Raspberry Pi. Updating to 1.18.11 will fix this issue.
0 commit comments