cec-client as command only redirect to hdmi 1 #656
Description
as (activatesource) do not accept parameters so always activate hdmi1
$ sudo cec-client
No device type given. Using 'recording device'
CEC Parser created - libCEC version 6.0.2
no serial port given. trying autodetect:
path: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6
com port: /dev/ttyACM0
opening a connection to the CEC adapter...
DEBUG: [ 12] Broadcast (F): osd name set to 'Broadcast'
DEBUG: [ 12] connection opened, clearing any previous input and waiting for active transmissions to end before starting
DEBUG: [ 18] communication thread started
DEBUG: [ 129] usbcec: enabling controlled mode
NOTICE: [ 300] connection opened
DEBUG: [ 301] << Broadcast (F) -> TV (0): POLL
DEBUG: [ 301] processor thread started
TRAFFIC: [ 301] << f0
DEBUG: [ 301] usbcec: updating line timeout: 3
DEBUG: [ 442] >> POLL sent
DEBUG: [ 442] TV (0): device status changed into 'present'
DEBUG: [ 442] << requesting vendor ID of 'TV' (0)
TRAFFIC: [ 442] << f0:8c
TRAFFIC: [ 690] >> 0f:87:00:00:f0
DEBUG: [ 690] TV (0): vendor = Samsung (0000f0)
DEBUG: [ 690] expected response received (87: device vendor id)
DEBUG: [ 690] >> TV (0) -> Broadcast (F): device vendor id (87)
DEBUG: [ 690] replacing the command handler for device 'TV' (0)
DEBUG: [ 690] registering new CEC client - v6.0.2
DEBUG: [ 745] usbcec: autonomous mode = disabled
DEBUG: [ 801] usbcec: logical address = Recorder 1
DEBUG: [ 856] usbcec: device type = recording device
DEBUG: [ 861] usbcec: logical address mask = 206
DEBUG: [ 932] usbcec: physical address = 1000
DEBUG: [ 987] usbcec: auto power on = disabled
DEBUG: [ 987] SetClientVersion - using client version '6.0.2'
NOTICE: [ 987] setting HDMI port to 1 on device TV (0)
DEBUG: [ 987] SetConfiguration: double tap timeout = 200ms, repeat rate = 0ms, release delay = 500ms
DEBUG: [ 987] detecting logical address for type 'recording device'
DEBUG: [ 987] trying logical address 'Recorder 1'
DEBUG: [ 987] << Recorder 1 (1) -> Recorder 1 (1): POLL
TRAFFIC: [ 987] << 11
DEBUG: [ 1072] CEC transmission - received response - TRANSMIT_FAILED_ACK
TRAFFIC: [ 1072] << 11
DEBUG: [ 1157] CEC transmission - received response - TRANSMIT_FAILED_ACK
DEBUG: [ 1157] >> POLL not sent
DEBUG: [ 1157] using logical address 'Recorder 1'
DEBUG: [ 1157] Recorder 1 (1): device status changed into 'handled by libCEC'
DEBUG: [ 1157] Recorder 1 (1): power status changed from 'unknown' to 'on'
DEBUG: [ 1157] Recorder 1 (1): vendor = Pulse Eight (001582)
DEBUG: [ 1157] Recorder 1 (1): CEC version 1.4
DEBUG: [ 1157] AllocateLogicalAddresses - device '0', type 'recording device', LA '1'
DEBUG: [ 1157] usbcec: updating ackmask: 0002
DEBUG: [ 1213] Recorder 1 (1): osd name set to 'CECTester'
DEBUG: [ 1213] Recorder 1 (1): menu language set to 'eng'
DEBUG: [ 1213] GetPhysicalAddress - trying to get the physical address via ADL
DEBUG: [ 1213] GetPhysicalAddress - ADL returned physical address 0000
DEBUG: [ 1213] GetPhysicalAddress - trying to get the physical address via nvidia driver
DEBUG: [ 1213] GetPhysicalAddress - nvidia driver returned physical address 0000
DEBUG: [ 1213] GetPhysicalAddress - trying to get the physical address via drm files
DEBUG: [ 1213] GetPhysicalAddress - drm files returned physical address 0000
DEBUG: [ 1213] GetPhysicalAddress - trying to get the physical address from the OS
DEBUG: [ 1215] GetPhysicalAddress - OS returned physical address 0000
NOTICE: [ 1215] setting HDMI port to 1 on device TV (0)
DEBUG: [ 1215] Recorder 1 (1): physical address changed from ffff to 1000
DEBUG: [ 1215] << Recorder 1 (1) -> broadcast (F): physical address 1000
TRAFFIC: [ 1215] << 1f:84:10:00:01
DEBUG: [ 1437] usbcec: updated OSD name: python-cec -> CECTester
DEBUG: [ 1437] using device/input physical address 0000
NOTICE: [ 1437] CEC client registered: libCEC version = 6.0.2, client version = 6.0.2, firmware version = 12, firmware build date: Tue Apr 28 14:20:49 2020 +0000, logical address(es) = Recorder 1 (1) , base device: TV (0), HDMI port number: 1, physical address: 1.0.0.0, compiled on 2023-01-19 00:00:00 by mockbuild on Linux 6.1.5-200.fc37.x86_64 (x86_64), features: P8_USB, DRM, P8_detect, randr, Linux
DEBUG: [ 1437] << Recorder 1 (1) -> TV (0): OSD name 'CECTester'
TRAFFIC: [ 1438] << 10:47:43:45:43:54:65:73:74:65:72
DEBUG: [ 1764] << requesting power status of 'TV' (0)
TRAFFIC: [ 1764] << 10:8f
TRAFFIC: [ 1964] >> 01:90:00
waiting for input
DEBUG: [ 1965] TV (0): power status changed from 'unknown' to 'on'
DEBUG: [ 1965] expected response received (90: report power status)
DEBUG: [ 1965] >> TV (0) -> Recorder 1 (1): report power status (90)
as
DEBUG: [ 7590] making Recorder 1 (1) the active source
DEBUG: [ 7590] usbcec: updating active source status: active
NOTICE: [ 7674] >> source activated: Recorder 1 (1)
DEBUG: [ 7674] sending active source message for 'Recorder 1'
NOTICE: [ 7674] << powering on 'TV' (0)
TRAFFIC: [ 7674] << 10:04
NOTICE: [ 7729] << Recorder 1 (1) -> broadcast (F): active source (1000)
TRAFFIC: [ 7729] << 1f:82:10:00
DEBUG: [ 7844] << Recorder 1 (1) -> TV (0): menu state 'activated'
TRAFFIC: [ 7844] << 10:8e:00
TRAFFIC: [ 8069] >> 01:8d:02
DEBUG: [ 8069] << Recorder 1 (1) -> TV (0): menu state 'activated'
TRAFFIC: [ 8069] << 10:8e:00
DEBUG: [ 8069] >> TV (0) -> Recorder 1 (1): menu request (8D
As it activate the current logical address, I try with:
la 2000
la TUNER2
but nothing modifies it.