User's guide

Preparation

To start:

cd /afs/cern.ch/work/l/lhcecld/run3_setup
source setup_scrubbing_environment

For the use of recalculated data make sure that EOS is mounted.

Analysis and plotting scripts

To plot heat loads vs time for one fill:

# From the logged data (arcs)
run 016_heat_load_arcs_vs_SAMs.py 6740 --var Arcs
# From recalculated data (arcs)
run 016_heat_load_arcs_vs_SAMs.py 6740 --var Arcs --use-recalc --with_press_drop
# From the logged data (special cell)
run 016_heat_load_arcs_vs_SAMs.py 6740 --var special_HC_dipoles
# From recalculated data (special cell)
run 016_heat_load_arcs_vs_SAMs.py 6740 --var special_HC_dipoles --use-recalc --with_press_drop

To plot heat loads vs average bunch intensity for one fill:

run 016b_heat_load_vs_intensity.py 6740