SD card issues on hw17 worker #10304
Description
Brief summary
The worker hangs with logs like:
Oct 07 00:35:59 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Oct 07 00:35:59 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Oct 07 00:35:59 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 161
Oct 07 00:36:02 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Oct 07 00:36:02 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Oct 07 00:36:02 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 163
Oct 07 00:36:38 hal9017 kernel: mmc_host mmc1: Timeout sending command (cmd 0x200000 arg 0x0 status 0x80200000)
Oct 07 00:36:38 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Busy; trying anyway
Oct 07 00:36:39 hal9017 kernel: mmc_host mmc1: Timeout sending command (cmd 0x200000 arg 0x0 status 0x80200000)
Oct 07 00:36:40 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Busy; trying anyway
Oct 07 00:36:40 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Oct 07 00:36:40 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Oct 07 00:36:40 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 157
Oct 07 00:36:42 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Oct 07 00:36:42 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Oct 07 00:36:43 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 173
Oct 07 00:36:44 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Oct 07 00:36:44 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Oct 07 00:36:44 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 173
Oct 07 00:36:46 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Oct 07 00:36:46 hal9017 kernel: mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Oct 07 00:36:46 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 173
Oct 07 00:36:48 hal9017 kernel: mmc_host mmc1: Timeout sending command (cmd 0x200000 arg 0x0 status 0x80200000)
Oct 07 00:36:49 hal9017 kernel: mmc1: Card stuck being busy! __mmc_poll_for_busy
Oct 07 00:36:49 hal9017 kernel: mmcblk1: recovery failed!
Oct 07 00:36:49 hal9017 kernel: I/O error, dev mmcblk1, sector 12424960 op 0x0:(READ) flags 0x80700 phys_seg 256 prio class 0
Oct 07 00:36:49 hal9017 kernel: dwmmc_rockchip fe2c0000.mmc: Busy; trying anyway
It might be simply dying SD card (I'll replace it shortly). But since it usually look differently in logs, I'm not 100% sure. Lets leave it here, so it can be found (and possibly further diagnosed) if it happens again.
Additional information
This one is based on Rockchip board, not RPi.