RaspAP AP mode working but clients not getting IP from DHCP

[WebTeccl]

Hi,I just installed RaspAP on a Raspberry Pi Zero W and it worked very well overall.I configured it in AP mode following the documentation. The access point starts correctly and I can see the WiFi network, but when I try to connect a device, it doesn't receive an IP address from the DHCP server.I believe the DHCP server is running and properly configured, but clients are not getting leases.Does anyone have any idea what might be missing or what I should check?Thanks in advance!

raspap_debug.log

[billz]

Start here https://docs.raspap.com/faq/#noip

[WebTeccl]

Thank you for your prompt response. I have read your suggestions and made the adjustments you indicated, but unfortunately I still haven't been able to find a solution. I completely reinstalled everything from scratch. The services appear to be running correctly, but when I try to connect my phone to the created Access Point (AP), I see the following errors in the log:

May 13 23:30:11 dnsmasq-dhcp[2628]: DHCP packet received on uap0 which has no address
May 13 23:30:15 dnsmasq-dhcp[2628]: DHCP packet received on uap0 which has no address
May 13 23:30:24 dnsmasq-dhcp[2628]: DHCP packet received on uap0 which has no address
May 13 23:30:28 dnsmasq-dhcp[2628]: no address range available for DHCP request via wlan0

Any help would be greatly appreciated. Thanks in advance!

[billz]

The uap0 interface indicates that you're using AP-STA mode, which explicitly has no support whatsoever

This mode is completely unsupported and should be used for educational purposes only. If you need a reliable solution with an access point (AP) and wireless client (STA) on the same device, obtain a second Wi-Fi adapter and follow this walkthrough instead. Issues related to this will be labeled as invalid and closed. No hard feelings.

https://docs.raspap.com/features-experimental/ap-sta/