Shelly Plus Add-on

[spiccinocchi]

Is the Shelly Plus Add-On supported?

[RavenSystem]

Not yet. Soon. Support is on the way.

[spiccinocchi]

ok very good news!

[RavenSystem]

https://github.com/RavenSystem/esp-homekit-devices/releases/tag/HAA_12.13.3

[spiccinocchi]

It is possibile to manage a sensor state by attaching a switch to a Shelly Add-on?
if yes, witch is the right gpio and where the switch should be connected to the Add-on?

[RavenSystem]

DIGITAL IN = GPIO19

[wroblewski6]

Does it support add on on shelly plus or not ??

[wroblewski6]

I tried to use my shelly plus 1 pm with add on and ds18b20 temp sensor with this script
{
"t": 21,
"n": "Ogrzewanie",
"g": 21,
"0": { "r": [[21]] },
"1": { "r": [[21, 1]] },
"dt": 1,
"i2": 0,
"f1": 5,
"f2": 42,
"f3": 0.5,
"i": 0.2
}

And i see hester thermostat but all the time temp is -99 and can not fix it . Any idea what mistake i made ??

[RavenSystem]

https://github.com/RavenSystem/esp-homekit-devices/wiki/temperature-and-humidity-sensors#sensor-gpio

Replace "g":21 with "g":[1,0]

And "n": "Ogrzewanie" does not make sense. Must be "n".3.

"i2" is useless. And f1, f2 and f3 are wrong. Same with "i": 0.2.

[wroblewski6]

Ok thx , will corect and check again . Chathpt made this mistakes