Run as a service?

[millercentral]

Thanks for this. If I want to load my custom fan curve at system start and have it maintained while the system is active can I run the fan.sh script as a service? If so, could you provide an example of what that could look like?

[RoversX]

Thanks for this. If I want to load my custom fan curve at system start and have it maintained while the system is active can I run the fan.sh script as a service? If so, could you provide an example of what that could look like?

Thanks, I think it is possible, you can choose to launch fan.sh or nvidia_fan_control.py when system start, here is an example, I think it should work.(Which means I haven't tested it yet.)

Create and edit a systemd service file:

sudo nano /etc/systemd/system/nvidia_fan.service

[Unit]
Description=NVIDIA Fan Control
After=multi-user.target

[Service]
Type=simple
ExecStart=/path/to/nvidia_fan_control_linux/fan.sh
User=root
Group=root
Restart=always

[Install]
WantedBy=multi-user.target

Enable and start the service:

sudo systemctl enable nvidia_fan.service
sudo systemctl start nvidia_fan.service
sudo systemctl status nvidia_fan.service

This should ensure the script runs with root privileges at start.

[millercentral]

I'll give it a try, thanks!

[zdybak]

This worked for me on ubuntu 24.04 with my fan flickering evga 3060ti, thank you so much!

[bernhofer]

if you have SELinux active (e.g., in Fedora) it can block the execution of the shell in the service from your home dir.
You can move it to e.g. /usr/local/bin by running sudo install -m755 ./fan.sh /usr/local/bin then you'll need to modify the service like this: ExecStart=/usr/local/bin/fan.sh.

Alternatively, you can just set ExecStart=/bin/bash -c 'cd /path/to/nvidia_fan_control_linux && source fan/bin/activate && python nvidia_fan_control.py'.

[Proxy13]

what we are looking for amazing

[RadND]

here is a .deb package combined with my fork and above .service file , can confirm working on ubt24.04
python is interpreter language , check the code by simply uncompress the deb file if you want to

nv-fanctrl-deb.tar.gz

python file is installed to /usr/bin/nv-fanctrl ,you need to modify that file (as root) if you want to change the curve, the default config works for me so I don't feel needed to do that.

i didn't pack the readme and copyright file,pardon.