-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathmbed_config.h
302 lines (298 loc) · 55.6 KB
/
mbed_config.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
/*
* mbed SDK
* Copyright (c) 2017 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
// Automatically generated configuration file.
// DO NOT EDIT, content will be overwritten.
#ifndef __MBED_CONFIG_DATA__
#define __MBED_CONFIG_DATA__
// Configuration parameters
#define ARM_UC_HTTP_RESUME_EXPONENTIATION_FACTOR 2 // set by library:update-client
#define ARM_UC_HTTP_RESUME_INITIAL_DELAY_SECS 5 // set by library:update-client
#define ARM_UC_HTTP_RESUME_MAXIMUM_DELAY_SECS (60*60) // set by library:update-client
#define ARM_UC_HTTP_RESUME_MAXIMUM_DOWNLOAD_TIME_SECS (7*24*60*60) // set by library:update-client
#define ARM_UC_HTTP_RESUME_TEST_MESSAGES_ENABLE 0 // set by library:update-client
#define ARM_UC_MULTI_FRAGS_PER_HTTP_BURST 64 // set by library:update-client
#define CLOCK_SOURCE USE_PLL_MSI
#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE 1 // set by target:NUCLEO_L476RG
#define LPTICKER_DELAY_TICKS 4 // set by target:NUCLEO_L476RG
#define MBEDTLS_USER_CONFIG_FILE "mbedTLSConfig_mbedOS.h" // set by library:device-management
#define MBED_CLIENT_USER_CONFIG_FILE MBED_CLOUD_CLIENT_USER_CONFIG_FILE // set by library:device-management
#define MBED_CLOUD_CLIENT_STL_API 0 // set by library:device-management
#define MBED_CLOUD_CLIENT_USER_CONFIG_FILE "mbed_cloud_client_user_config.h" // set by library:device-management
#define MBED_CONF_APP_BUTTON_PRESSED_STATE 1 // set by application
#define MBED_CONF_APP_FLASH_SIZE (1024*1024) // set by application[NUCLEO_L476RG]
#define MBED_CONF_APP_FLASH_START_ADDRESS 0x08000000 // set by application[NUCLEO_L476RG]
#define MBED_CONF_APP_FORMAT_STORAGE_LAYER_ON_ERROR 1 // set by application
#define MBED_CONF_APP_MAIN_STACK_SIZE 6000 // set by application
#define MBED_CONF_APP_NO_LED 1 // set by application[NUCLEO_L476RG]
#define MBED_CONF_ATMEL_RF_ASSUME_SPACED_SPI 1 // set by library:atmel-rf[STM]
#define MBED_CONF_ATMEL_RF_FULL_SPI_SPEED 7500000 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_FULL_SPI_SPEED_BYTE_SPACING 250 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_IRQ_THREAD_STACK_SIZE 1024 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_LOW_SPI_SPEED 3750000 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_PROVIDE_DEFAULT 0 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_USE_SPI_SPACING_API 0 // set by library:atmel-rf
#define MBED_CONF_CELLULAR_DEBUG_AT 0 // set by library:cellular
#define MBED_CONF_CELLULAR_RANDOM_MAX_START_DELAY 0 // set by library:cellular
#define MBED_CONF_CELLULAR_USE_APN_LOOKUP 1 // set by library:cellular
#define MBED_CONF_DEVICE_MANAGEMENT_DEVELOPER_MODE 1 // set by library:device-management
#define MBED_CONF_DRIVERS_UART_SERIAL_RXBUF_SIZE 256 // set by library:drivers
#define MBED_CONF_DRIVERS_UART_SERIAL_TXBUF_SIZE 256 // set by library:drivers
#define MBED_CONF_ESP8266_DEBUG 0 // set by library:esp8266
#define MBED_CONF_ESP8266_PROVIDE_DEFAULT 0 // set by library:esp8266
#define MBED_CONF_ESP8266_SOCKET_BUFSIZE 8192 // set by library:esp8266
#define MBED_CONF_EVENTS_PRESENT 1 // set by library:events
#define MBED_CONF_EVENTS_SHARED_DISPATCH_FROM_APPLICATION 0 // set by library:events
#define MBED_CONF_EVENTS_SHARED_EVENTSIZE 256 // set by library:events
#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_EVENTSIZE 256 // set by library:events
#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_STACKSIZE 1024 // set by library:events
#define MBED_CONF_EVENTS_SHARED_STACKSIZE 2048 // set by library:events
#define MBED_CONF_EVENTS_USE_LOWPOWER_TIMER_TICKER 0 // set by library:events
#define MBED_CONF_FILESYSTEM_PRESENT 1 // set by library:filesystem
#define MBED_CONF_LORA_ADR_ON 1 // set by library:lora
#define MBED_CONF_LORA_APPLICATION_EUI {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_APPLICATION_KEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_APPSKEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_APP_PORT 15 // set by library:lora
#define MBED_CONF_LORA_AUTOMATIC_UPLINK_MESSAGE 1 // set by library:lora
#define MBED_CONF_LORA_DEVICE_ADDRESS 0x00000000 // set by library:lora
#define MBED_CONF_LORA_DEVICE_EUI {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_DOWNLINK_PREAMBLE_LENGTH 5 // set by library:lora
#define MBED_CONF_LORA_DUTY_CYCLE_ON 1 // set by library:lora
#define MBED_CONF_LORA_DUTY_CYCLE_ON_JOIN 1 // set by library:lora
#define MBED_CONF_LORA_FSB_MASK {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x00FF} // set by library:lora
#define MBED_CONF_LORA_FSB_MASK_CHINA {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF} // set by library:lora
#define MBED_CONF_LORA_LBT_ON 0 // set by library:lora
#define MBED_CONF_LORA_MAX_SYS_RX_ERROR 5 // set by library:lora
#define MBED_CONF_LORA_NB_TRIALS 12 // set by library:lora
#define MBED_CONF_LORA_NWKSKEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_OVER_THE_AIR_ACTIVATION 1 // set by library:lora
#define MBED_CONF_LORA_PHY EU868 // set by library:lora
#define MBED_CONF_LORA_PUBLIC_NETWORK 1 // set by library:lora
#define MBED_CONF_LORA_TX_MAX_SIZE 64 // set by library:lora
#define MBED_CONF_LORA_UPLINK_PREAMBLE_LENGTH 8 // set by library:lora
#define MBED_CONF_LORA_WAKEUP_TIME 5 // set by library:lora
#define MBED_CONF_LWIP_ADDR_TIMEOUT 5 // set by library:lwip
#define MBED_CONF_LWIP_ADDR_TIMEOUT_MODE 1 // set by library:lwip
#define MBED_CONF_LWIP_DEBUG_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE 512 // set by library:lwip
#define MBED_CONF_LWIP_ENABLE_PPP_TRACE 0 // set by library:lwip
#define MBED_CONF_LWIP_ETHERNET_ENABLED 1 // set by library:lwip
#define MBED_CONF_LWIP_IPV4_ENABLED 1 // set by library:lwip
#define MBED_CONF_LWIP_IPV6_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_IP_VER_PREF 4 // set by library:lwip
#define MBED_CONF_LWIP_MEM_SIZE 2310 // set by library:lwip[STM]
#define MBED_CONF_LWIP_PPP_THREAD_STACKSIZE 768 // set by library:lwip
#define MBED_CONF_LWIP_SOCKET_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE 1200 // set by library:lwip
#define MBED_CONF_LWIP_TCP_ENABLED 1 // set by library:lwip
#define MBED_CONF_LWIP_TCP_MAXRTX 6 // set by library:lwip
#define MBED_CONF_LWIP_TCP_SERVER_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_TCP_SOCKET_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_UDP_SOCKET_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_USE_MBED_TRACE 0 // set by library:lwip
#define MBED_CONF_MBED_CLIENT_EVENT_LOOP_SIZE 1024 // set by library:mbed-client
#define MBED_CONF_MBED_CLIENT_PAL_RSA_REQUIRED 0 // set by library:mbed-client-pal
#define MBED_CONF_MBED_CLIENT_RECONNECTION_COUNT 3 // set by library:mbed-client
#define MBED_CONF_MBED_CLIENT_RECONNECTION_INTERVAL 5 // set by library:mbed-client
#define MBED_CONF_MBED_CLIENT_RECONNECTION_LOOP 1 // set by library:mbed-client
#define MBED_CONF_MBED_CLIENT_SN_COAP_DUPLICATION_MAX_MSGS_COUNT 5 // set by library:mbed-client
#define MBED_CONF_MBED_CLIENT_SN_COAP_RESENDING_QUEUE_SIZE_MSGS 5 // set by library:mbed-client
#define MBED_CONF_MBED_CLIENT_TCP_KEEPALIVE_INTERVAL 90 // set by library:mbed-client
#define MBED_CONF_MBED_CLOUD_CLIENT_UPDATE_DOWNLOAD_PROTOCOL MBED_CLOUD_CLIENT_UPDATE_DOWNLOAD_PROTOCOL_COAP // set by library:mbed-cloud-client
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL_MASK 0x7fff800 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL_PAGE 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_DEVICE_TYPE NET_6LOWPAN_ROUTER // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PANID_FILTER 0xffff // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PSK_KEY {0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PSK_KEY_ID 1 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_SECURITY_MODE NONE // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_SEC_LEVEL 5 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_HEAP_SIZE 32500 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_HEAP_STAT_INFO NULL // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL 22 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_MASK 0x7fff800 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_PAGE 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_COMMISSIONING_DATASET_TIMESTAMP 0x10000 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_EXTENDED_PANID {0xf1, 0xb5, 0xa1, 0xb2,0xc4, 0xd5, 0xa1, 0xbd } // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_ML_PREFIX {0xfd, 0x0, 0x0d, 0xb8, 0x0, 0x0, 0x0, 0x0} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_NETWORK_NAME "Thread Network" // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_PANID 0x0700 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_PSKC {0xc8, 0xa6, 0x2e, 0xae, 0xf3, 0x68, 0xf3, 0x46, 0xa9, 0x9e, 0x57, 0x85, 0x98, 0x9d, 0x1c, 0xd0} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_DEVICE_TYPE MESH_DEVICE_TYPE_THREAD_ROUTER // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_MASTER_KEY {0x10, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_PSKD "ABCDEFGH" // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_SECURITY_POLICY 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_USE_STATIC_LINK_CONFIG 1 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_USE_MALLOC_FOR_HEAP 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_CHANNEL_FUNCTION 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_DWELL_INTERVAL 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_FIXED_CHANNEL 0xffff // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_INTERVAL 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_NETWORK_NAME "NETWORK_NAME" // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_OPERATING_CLASS 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_OPERATING_MODE 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_REGULATORY_DOMAIN 3 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_UC_CHANNEL_FUNCTION 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_UC_DWELL_INTERVAL 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_UC_FIXED_CHANNEL 0xffff // set by library:mbed-mesh-api
#define MBED_CONF_MCR20A_PROVIDE_DEFAULT 0 // set by library:mcr20a
#define MBED_CONF_NANOSTACK_CONFIGURATION nanostack_full // set by library:nanostack
#define MBED_CONF_NANOSTACK_HAL_CRITICAL_SECTION_USABLE_FROM_INTERRUPT 0 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_DISPATCH_FROM_APPLICATION 0 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_THREAD_STACK_SIZE 6144 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_USE_MBED_EVENTS 0 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_NVM_CFSTORE 0 // set by library:nanostack-hal
#define MBED_CONF_NSAPI_DEFAULT_MESH_TYPE THREAD // set by library:nsapi
#define MBED_CONF_NSAPI_DEFAULT_STACK LWIP // set by library:nsapi
#define MBED_CONF_NSAPI_DEFAULT_WIFI_PASSWORD "Password" // set by application[*]
#define MBED_CONF_NSAPI_DEFAULT_WIFI_SECURITY WPA_WPA2 // set by application[*]
#define MBED_CONF_NSAPI_DEFAULT_WIFI_SSID "SSID" // set by application[*]
#define MBED_CONF_NSAPI_DNS_CACHE_SIZE 3 // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_RESPONSE_WAIT_TIME 5000 // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_RETRIES 0 // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_TOTAL_ATTEMPTS 3 // set by library:nsapi
#define MBED_CONF_NSAPI_PRESENT 1 // set by library:nsapi
#define MBED_CONF_NSAPI_SOCKET_STATS_ENABLE 0 // set by library:nsapi
#define MBED_CONF_NSAPI_SOCKET_STATS_MAX_COUNT 10 // set by library:nsapi
#define MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED 1 // set by library:platform[NUCLEO_L476RG]
#define MBED_CONF_PLATFORM_CTHUNK_COUNT_MAX 8 // set by library:platform
#define MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE 9600 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_ALL_THREADS_INFO 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_DECODE_HTTP_URL_STR "\nFor more info, visit: https://armmbed.github.io/mbedos-error/?error=0x%08X" // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_SIZE 4 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_REBOOT_MAX 1 // set by library:platform
#define MBED_CONF_PLATFORM_FATAL_ERROR_AUTO_REBOOT_ENABLED 1 // set by library:platform[NUCLEO_L476RG]
#define MBED_CONF_PLATFORM_FORCE_NON_COPYABLE_ERROR 0 // set by library:platform
#define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16 // set by library:platform
#define MBED_CONF_PLATFORM_POLL_USE_LOWPOWER_TIMER 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_BAUD_RATE 115200 // set by application[*]
#define MBED_CONF_PLATFORM_STDIO_BUFFERED_SERIAL 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES 1 // set by application[*]
#define MBED_CONF_PLATFORM_STDIO_CONVERT_TTY_NEWLINES 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_FLUSH_AT_EXIT 1 // set by library:platform
#define MBED_CONF_PLATFORM_USE_MPU 1 // set by library:platform
#define MBED_CONF_PPP_CELL_IFACE_APN_LOOKUP 1 // set by library:ppp-cell-iface
#define MBED_CONF_PPP_CELL_IFACE_AT_PARSER_BUFFER_SIZE 256 // set by library:ppp-cell-iface
#define MBED_CONF_PPP_CELL_IFACE_AT_PARSER_TIMEOUT 8000 // set by library:ppp-cell-iface
#define MBED_CONF_PPP_CELL_IFACE_BAUD_RATE 115200 // set by library:ppp-cell-iface
#define MBED_CONF_RTOS_IDLE_THREAD_STACK_SIZE 512 // set by library:rtos
#define MBED_CONF_RTOS_IDLE_THREAD_STACK_SIZE_TICKLESS_EXTRA 256 // set by library:rtos
#define MBED_CONF_RTOS_MAIN_THREAD_STACK_SIZE 4096 // set by library:rtos
#define MBED_CONF_RTOS_PRESENT 1 // set by library:rtos
#define MBED_CONF_RTOS_THREAD_STACK_SIZE 4096 // set by library:rtos
#define MBED_CONF_RTOS_TIMER_THREAD_STACK_SIZE 768 // set by library:rtos
#define MBED_CONF_S2LP_PROVIDE_DEFAULT 0 // set by library:s2lp
#define MBED_CONF_SD_CMD0_IDLE_STATE_RETRIES 5 // set by library:sd
#define MBED_CONF_SD_CMD_TIMEOUT 10000 // set by library:sd
#define MBED_CONF_SD_CRC_ENABLED 1 // set by library:sd
#define MBED_CONF_SD_FSFAT_SDCARD_INSTALLED 1 // set by library:sd
#define MBED_CONF_SD_INIT_FREQUENCY 100000 // set by library:sd
#define MBED_CONF_SD_SPI_CLK D13 // set by application[NUCLEO_L476RG]
#define MBED_CONF_SD_SPI_CS D10 // set by application[NUCLEO_L476RG]
#define MBED_CONF_SD_SPI_MISO D12 // set by application[NUCLEO_L476RG]
#define MBED_CONF_SD_SPI_MOSI D11 // set by application[NUCLEO_L476RG]
#define MBED_CONF_SD_TEST_BUFFER 8192 // set by library:sd
#define MBED_CONF_STORAGE_DEFAULT_KV kv // set by library:storage
#define MBED_CONF_STORAGE_FILESYSTEM_BLOCKDEVICE default // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_SIZE 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_FILESYSTEM default // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_FOLDER_PATH kvstore // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_INTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_MOUNT_POINT kv // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_BLOCKDEVICE default // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_EXTERNAL_SIZE 0 // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_FILESYSTEM default // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_FOLDER_PATH kvstore // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_MOUNT_POINT kv // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_RBP_INTERNAL_SIZE 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_STORAGE_TYPE default // set by library:storage
#define MBED_CONF_STORAGE_TDB_EXTERNAL_BLOCKDEVICE default // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_EXTERNAL_SIZE 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_INTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_BLOCKDEVICE default // set by library:storage_tdb_external_no_rbp
#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external_no_rbp
#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_EXTERNAL_SIZE 0 // set by library:storage_tdb_external_no_rbp
#define MBED_CONF_STORAGE_TDB_EXTERNAL_RBP_INTERNAL_SIZE 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_internal
#define MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE 0 // set by library:storage_tdb_internal
#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x400 // set by library:rtos[*]
#define MBED_CONF_TARGET_DEEP_SLEEP_LATENCY 3 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LPTICKER_LPTIM 1 // set by target:NUCLEO_L476RG
#define MBED_CONF_TARGET_LPTICKER_LPTIM_CLOCK 1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LPUART_CLOCK_SOURCE USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LSE_AVAILABLE 1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_MPU_ROM_END 0x0fffffff // set by target:Target
#define MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE WIFI // set by application[NUCLEO_L476RG]
#define MBED_CONF_UPDATE_CLIENT_APPLICATION_DETAILS (MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024) // set by application[NUCLEO_L476RG]
#define MBED_CONF_UPDATE_CLIENT_BOOTLOADER_DETAILS 0 // set by library:update-client
#define MBED_CONF_UPDATE_CLIENT_FIRMWARE_HEADER_VERSION 0 // set by library:update-client
#define MBED_CONF_UPDATE_CLIENT_STORAGE_ADDRESS (64*1024*1024) // set by application[NUCLEO_L476RG]
#define MBED_CONF_UPDATE_CLIENT_STORAGE_LOCATIONS 1 // set by application[NUCLEO_L476RG]
#define MBED_CONF_UPDATE_CLIENT_STORAGE_PAGE 512 // set by library:update-client
#define MBED_CONF_UPDATE_CLIENT_STORAGE_SIZE (2*1024*1024) // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_CONNECT_MAX_ATTEMPT 3 // set by library:wizfi310
#define MBED_CONF_WIZFI310_CTS D5 // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_EVENT_QUEUE_SIZE 256 // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_LINE_BUFFER_SIZE 128 // set by library:wizfi310
#define MBED_CONF_WIZFI310_MAX_HEAP_USAGE 4*1024 // set by library:wizfi310
#define MBED_CONF_WIZFI310_PROVIDE_DEFAULT 1 // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_RST NC // set by library:wizfi310
#define MBED_CONF_WIZFI310_RTS D3 // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_RX D2 // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_RX_BUFFER_SIZE 64 // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_STACKSIZE 1536 // set by application[NUCLEO_L476RG]
#define MBED_CONF_WIZFI310_TX D8 // set by application[NUCLEO_L476RG]
#define MBED_LFS_BLOCK_SIZE 512 // set by library:littlefs
#define MBED_LFS_ENABLE_INFO 0 // set by library:littlefs
#define MBED_LFS_INTRINSICS 1 // set by library:littlefs
#define MBED_LFS_LOOKAHEAD 512 // set by library:littlefs
#define MBED_LFS_PROG_SIZE 64 // set by library:littlefs
#define MBED_LFS_READ_SIZE 64 // set by library:littlefs
#define MEM_ALLOC malloc // set by library:mbed-trace
#define MEM_FREE free // set by library:mbed-trace
#define NSAPI_PPP_AVAILABLE 0 // set by library:lwip
#define NSAPI_PPP_IPV4_AVAILABLE 1 // set by library:lwip
#define NSAPI_PPP_IPV6_AVAILABLE 0 // set by library:lwip
#define NVSTORE_ENABLED 1 // set by library:nvstore
#define NVSTORE_MAX_KEYS 16 // set by library:nvstore
#define PAL_DNS_API_VERSION 0 // set by library:mbed-client-pal
#define PAL_DTLS_PEER_MIN_TIMEOUT 5000 // set by library:device-management
#define PAL_FS_MOUNT_POINT_PRIMARY "/fs" // set by library:device-management
#define PAL_INTERNAL_FLASH_SECTION_1_ADDRESS (MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2*(128*1024)) // set by application[NUCLEO_L476RG]
#define PAL_INTERNAL_FLASH_SECTION_1_SIZE (128*1024) // set by application[NUCLEO_L476RG]
#define PAL_INTERNAL_FLASH_SECTION_2_ADDRESS (MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1*(128*1024)) // set by application[NUCLEO_L476RG]
#define PAL_INTERNAL_FLASH_SECTION_2_SIZE (128*1024) // set by application[NUCLEO_L476RG]
#define PAL_INT_FLASH_NUM_SECTIONS 2 // set by library:device-management
#define PAL_MAX_FRAG_LEN 0 // set by library:mbed-client-pal
#define PAL_USER_DEFINED_CONFIGURATION "sotp_fs_config_MbedOS.h" // set by library:device-management
#define USE_BUTTON 1 // set by application
// Macros
#define ARM_UC_PROFILE_MBED_CLOUD_CLIENT 1 // defined by library:mbed-cloud-client
#define ARM_UC_USE_PAL_BLOCKDEVICE 1 // defined by library:device-management
#define MBEDTLS_CIPHER_MODE_CTR // defined by library:SecureStore
#define MBEDTLS_CMAC_C // defined by library:SecureStore
#define MBED_CLOUD_CLIENT_UPDATE_STORAGE ARM_UCP_FLASHIAP_BLOCKDEVICE // defined by library:device-management
#define NS_USE_EXTERNAL_MBED_TLS // defined by library:nanostack
#define UNITY_INCLUDE_CONFIG_H // defined by library:utest
#define _RTE_ // defined by library:rtos
#endif