Skip to content

README.md

Latest commit

 

History

History
39 lines (34 loc) · 1.36 KB

README.md

File metadata and controls

39 lines (34 loc) · 1.36 KB

BW16-ARP-Scan

ARP Scan in local network using BW16 (RTL8720DN)

Hardware Requirements

  • Ai-Thinker BW16 RTL8720DN Development Board

Setup

  1. Download Arduino IDE from here according to your Operating System.

  2. Install it.

  3. Go to File → Preferences → Additional Boards Manager URLs.

  4. Paste the following link :

    https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek_amebad_index.json

  5. Click on OK.

  6. Go to Tools → Board → Board Manager.

  7. Search Realtek Ameba Boards (32-Bits ARM Cortex-M33@200MHz) by Realtek. !!! CODE WORK WITH 3.1.7 pack, other versions may not be work !!!

  8. Install it.

  9. Restart the Arduino IDE.

  10. Done!

Install

  1. Download or Clone the Repository.
  2. Open the folder and open ARPScan.ino in Arduino IDE.
  3. Enter you data in: "WiFi.begin("u_ssid", "u_pass")"
  4. Select board from the Tools → Board → AmebaD ARM (32-bits) Boards.
    • It is Ai-Thinker BW16 (RTL8720DN).
  5. Select the port of that board.
  6. Go to Tools → Board → Auto Flash Mode and select Enable.
  7. Upload the code.
    • Firmware will start working immediately.
    • Open Serial Monitor (115200) and write "scan"

Note

Android/ios in sleep mode, may not be dont detected
TTL Scan may not work
Code for educational purposes, good luck