Flash Jetpack | Seeed Studio Wiki #1361
giscus[bot]
bot
Replies: 31 comments 63 replies
-
|
Hi, I flashed Jetson 6.0 in Jetson Orin NX (8GB) and when i tried to upgrade i'm getting kernerl not cofigured error. Deatiled log |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for your help so far, but what about the errors we get when running [...]
Add /bin/sh
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/gadget/udc/tegra-xudc.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/ucsi/typec_ucsi.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/ucsi/ucsi_ccg.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/typec.ko
Cleaning up the temporary directory for updating the initrd..
Errors were encountered while processing:
nvidia-l4t-kernel
nvidia-l4t-kernel-headers
nvidia-l4t-jetson-io
nvidia-l4t-kernel-oot-modules
nvidia-l4t-display-kernel
nvidia-l4t-kernel-oot-headers
nvidia-l4t-kernel-dtbs |
Beta Was this translation helpful? Give feedback.
-
|
Can you try with Jepack 6.0 i remember seeed fixing this with the same. Also one workaround is this to ignore these packages please refer HERE |
Beta Was this translation helpful? Give feedback.
-
|
You can refer to Q8 and Q9 in our Jetson FAQ to resolve the issue you're encountering. Q8 explains why running |
Beta Was this translation helpful? Give feedback.
-
@Eldho1416, thanks helping out. Jetpack 6.0 works without any problems on my end. |
Beta Was this translation helpful? Give feedback.
-
|
Seeed-Studio/Linux_for_Tegra#41 Same issue with 6.2 |
Beta Was this translation helpful? Give feedback.
-
|
HI! |
Beta Was this translation helpful? Give feedback.
-
|
Try changing the data cable, also did you remove the jumper once the jetson went into recovery mode. |
Beta Was this translation helpful? Give feedback.
-
I can attest that. I had similar problems and changing the USB cable solved that. |
Beta Was this translation helpful? Give feedback.
-
|
I successfully made changes to the USB using sdkmanager. Thank you;) |
Beta Was this translation helpful? Give feedback.
-
|
I flashed Jetson 6.0 to an Jetson Orin Nano (8GB) and I'm trying to restore the WiFi driver, but I get always the error:
I searched on internet, but seems all right! Here my console: |
Beta Was this translation helpful? Give feedback.
-
|
Probably it is not available in Ubuntu 22.04 |
Beta Was this translation helpful? Give feedback.
-
|
https://beltrani.com/installing-the-iwlwifi-driver-on-a-jetson-nano-dev-kit/ Hope this helps. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks a lot
Inviato da Outlook per iOS<https://aka.ms/o0ukef>
…________________________________
Da: Eldho K K ***@***.***>
Inviato: Tuesday, August 20, 2024 8:30:08 PM
A: Seeed-Studio/wiki-documents ***@***.***>
Cc: Luca Nardelli ***@***.***>; Comment ***@***.***>
Oggetto: Re: [Seeed-Studio/wiki-documents] Flash Jetpack | Seeed Studio Wiki (Discussion #1361)
https://www.google.com/amp/s/beltrani.com/installing-the-iwlwifi-driver-on-a-jetson-nano-dev-kit/amp/
Hope this helps
—
Reply to this email directly, view it on GitHub<#1361 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB6YC3V6M4JA22LNUD5EKNDZSODLBAVCNFSM6AAAAABKMQXH4SVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMZZHEYTINA>.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
The download links for Jetpack 6.0 do not seem to be working for me. Are there alternative URL's? |
Beta Was this translation helpful? Give feedback.
-
|
same here, in the end i used VPN and it works |
Beta Was this translation helpful? Give feedback.
-
|
Hello, would I be able to flash Jetpack 6.0 using the SDK manager or can it be done only by following these steps? |
Beta Was this translation helpful? Give feedback.
-
|
If it is custom board built by seeed then you need to follow these steps. I never had a successful flash with sdk manager except for nano |
Beta Was this translation helpful? Give feedback.
-
|
Hello,
/home/varun/Downloads/jetson/mfi_recomputer-orin-j401/recomputer-orin-j401.conf: line 29: /home/varun/Downloads/jetson/mfi_recomputer-orin-j401/p3768-0000-p3767-0000-a0.conf: No such file or directory Entry added by NVIDIA initrd flash tool/home/varun/Downloads/jetson/mfi_recomputer-orin-j401/tools/kernel_flash/tmp 127.0.0.1(rw,nohide,insecure,no_subtree_check,async,no_root_squash)
Create flash environment 0
/home/varun/Downloads/jetson/mfi_recomputer-orin-j401/temp_initrdflash/bootloader0 /home/varun/Downloads/jetson/mfi_recomputer-orin-j401 Entering RCM boot [ 0.0475 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from --mb1_bin /home/varun/Downloads/jetson/mfi_recomputer-orin-j401
Waiting for target to boot-up... Number Start End Size File system Name Flags [ 9]: l4t_flash_from_kernel: Expanding last partition to fill the storage device Allocating group tables: done Formatting APP parition done |
Beta Was this translation helpful? Give feedback.
-
|
I had faced issue when Jetson was not in recovery mode, not sure if it had exactly the same error logs. Also what is the size of SD crad/NVMe? |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for reply @Eldho1416 I am almost sure that the Jetson is is recovery mode. The nvme is of 128Gb. Do you have recommendation I can try? |
Beta Was this translation helpful? Give feedback.
-
|
Try changing the USB maybe? That is the only suggestion i can think of. |
Beta Was this translation helpful? Give feedback.
-
|
I also got the same issue. |
Beta Was this translation helpful? Give feedback.
-
|
This seems to be a superuser permissions issue with SUID of the in the |
Beta Was this translation helpful? Give feedback.
-
|
Hi i have j4012 16Gb trying to install jetpack 6, i followed the process as it is but always get error p3768-0000-p3767-0000-a0.conf file is missing. log is below? any help please sudo ./tools/kernel_flash/l4t_initrd_flash.sh --flash-only --massflash 1 --network usb3 --showlogs |
Beta Was this translation helpful? Give feedback.
-
|
New to this and I just stumbled upon this myself. Turns out that there are no spaces allowed in the path to the update package. In your case that's the 'New folder' bit, mine was 'Jetson ORIN NG'... HTH |
Beta Was this translation helpful? Give feedback.
-
|
Could you please host this file also on a US-based website? the websites in .cn are extremely slow for downloading https://szseeedstudio-my.sharepoint.cn/:u:/g/personal/youjiang_yu_szseeedstudio_partner_onmschina_cn/EbEZRxHDtgBDjBrHK_7ltfEB6JBa3VGXLx3meNc0OJUL_g?e=8MNsTg |
Beta Was this translation helpful? Give feedback.
-
|
Trying to flash Jetpack 6 to my Orin NX Seeed ReComputer J4012 kit ... over USB ... Waiting for target to boot-up... Keep getting this mount.nfs error .. what can likely be the cause of this error? Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Myself and a colleauge on a seperate internet connection are both struggling to download the package for JP6.0 Orin NX 16GB. Is there an alternative download location? |
Beta Was this translation helpful? Give feedback.
-
|
I'm getting a flashing error similar to the one posted above. I have an Orin Nano 8GB developer kit with a 1 TB SSD. i'm trying to flash It will hang for about 5 minutes and then continue, ultimately failing with a flashing error. Has anyone run into this before? Am I inadvertently trying something that isn't supported? |
Beta Was this translation helpful? Give feedback.
-
|
For dev kit, please operate it in accordance with tutorial of the Nvidia sdkmanager |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I just tried for nvdia jetson orin nx 8gb board but I got these What I am missing here ? |
Beta Was this translation helpful? Give feedback.
-
|
Please contact our technical support team at [email protected]. Provide them with the error details and your setup information, and they will assist you further. |
Beta Was this translation helpful? Give feedback.
-
|
FYI, make sure Host Ubuntu has IPv6 enabled, else you might see something like this in either method above: "Waiting for device to expose ssh ...sysctl: cannot stat /proc/sys/net/ipv6/conf/usb0/disable_ipv6: No such file or directory" I have re-enabled IPv6 and now have gotten past this step, and hopefully flash completes now. Update: Flash completed, all setup now. |
Beta Was this translation helpful? Give feedback.
-
|
Will there be jetpack 6.2 support for the j501 carrier board? |
Beta Was this translation helpful? Give feedback.
-
|
We are currently working on the development for this. Please stay tuned and thank you for your patience! |
Beta Was this translation helpful? Give feedback.
-
|
Has anyone managed to complete the flashing process with a virtual machine or docker? |
Beta Was this translation helpful? Give feedback.
-
|
I had tried with a VM (Oracle i guess) and it used to get stuck at 99% always. |
Beta Was this translation helpful? Give feedback.
-
|
Thought so, i guess we'll keep relying on the old-ish machine in the corner of the office to flash the boards |
Beta Was this translation helpful? Give feedback.
-
|
Has anyone figured out how to encrypt the rootfs on the board with the new jetpack releases? |
Beta Was this translation helpful? Give feedback.
-
|
Hello, you can refer to this document Disk Encryption to encrypt the rootfs. |
Beta Was this translation helpful? Give feedback.
-
|
I was hoping to get a oneliner (or close to) like the one given with the mfi_recomputer-xxx archives. |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I have just flashed a jetson orin nano with the jetpack 6.2 using a laptop running Ubuntu 22.04. The wifi module still did not want to work, bluetooth works nevertheless. |
Beta Was this translation helpful? Give feedback.
-
|
@jinchenglee Thanks for your feedback. May I ask if you were flashing 6.1 in a virtual machine? We recommend using a native Ubuntu environment, as virtual machines may cause USB communication issues, which can result in the process getting stuck at "Waiting for target to boot-up". Also, while flashing JP6.2 via the official SDK Manager is a workable solution, please note that this version may have some stability issues and currently does not support super mode. If you're interested in super mode, feel free to keep an eye on our upcoming products. For further questions, you're welcome to contact our technical support team at [email protected]. |
Beta Was this translation helpful? Give feedback.
-
I did use a native Ubuntu 22.04 LTS machine when trying to flashing 6.1 with SeeedStudio tarball. It waits forever on the target to reboot so I don't know why. Where is the "command" host machine sends to the target to wake it up? As the target is put into standby mode (the short of force-recovery to gnd), it must wait for sth. to start bootstrap, right?
Does this mean if I never turn-on "super mode", I should be fine with JP6.2 for Orin NX 16G on J401 board (J4012 basically)? I don't really need "super mode", which is a power monster. |
Beta Was this translation helpful? Give feedback.
-
|
Replying to @nfs0619 |
Beta Was this translation helpful? Give feedback.
-
|
@anasderkaoui Thanks for the clarification. Could you please let us know if you are using the reComputer J3011 model? Also, could you share which Wi-Fi module you are using? To help you resolve this issue more efficiently, we recommend sending these details to our technical support team at [email protected]. They will be able to assist you further. |
Beta Was this translation helpful? Give feedback.
-
|
@jinchenglee We recommend using JetPack 6.1, as JetPack 6.2 may still have stability issues. |
Beta Was this translation helpful? Give feedback.
-
|
Is there something special about how I have to flash an NVMe drive on the reComputer J401 vs the Jetson Orin NX Dev kit from NVIDIA? I have flashed NVMe on numerous setups. The official dev kit always boots NVMe without issue. The reComputer has issues detecting the NVMe drive 95% of the time. Am I doing something wrong here? |
Beta Was this translation helpful? Give feedback.
-
|
We traced this back to the low profile NVMe connector on the reComputer.. We have a heat sink that wraps around the NVMe drive and it interferes with the PCB and lifts up on the NVMe connector and broke the solder connection on a few of the edge pins. The NVIDIA dev kit has more space between the bottom of the NVMe drive and PCB so it there was no interference there. Do you happen to have the P/N of the NVMe connection so we can source a new one with a higher profile? |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for the update. I would recommend reaching out to our technical support team at [email protected]. They’ll be able to provide you with more detailed information and faster assistance regarding the NVMe connector part number. |
Beta Was this translation helpful? Give feedback.
-
|
I’ve installed JetPack 6.0 on my Jetson Orin NX 16GB following the exact instructions provided here. After the installation, I encountered a permission issue when trying to open Firefox or any other browser (installed via Snap Store). The applications fail to launch because they attempt to create directories or files under the root directory It seems like there are restricted root permissions or sandboxing issues with snap packages under the current JetPack/Linux configuration. Has anyone faced this issue before or knows how to resolve it? Any suggestions such as adjusting snap confinement policies, using an alternative installation method, or correcting user permissions would be greatly appreciated. quanta@quanta-desktop:~$ firefox
2025/07/30 22:49:25.620341 cmd_run.go:1344: WARNING: cannot create user data dir
ectory: failed to verify SELinux context of /home/quanta/snap: exec: "matchpathc
on": executable file not found in $PATH
cannot set capabilities: Operation not permitted
quanta@quanta-desktop:~$ sudo firefox
2025/07/30 22:49:48.647677 cmd_run.go:1344: WARNING: cannot create user data dir
ectory: failed to verify SELinux context of /root/snap: exec: "matchpathcon": ex ecutable file not found in $PATH
touch: cannot touch '/root/snap/firefox/common/.cache/desktop-runtime-date': No such file or directory
Running Firefox as root in a regular user's session is not supported. (SXAUTHOR ITY is /run/user/1000/gdm/Xauthority which is owned by quanta.)
quanta@quanta-desktop:~$ |
Beta Was this translation helpful? Give feedback.
-
|
Hi, the issue you’re seeing can usually be resolved in one of these two ways:
You can find the detailed steps here: |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I just flashed the Jetpack 6.2.1(https://seeedstudio88-my.sharepoint.com/:u:/g/personal/youjiang_yu_seeedstudio88_onmicrosoft_com/EWCZOBNb9C9AoZe-mt23jLABZk942Lf0yopVGFJFTeL5DA?e=o7epES)on an recomputer J4012 Orin NX 16GB and can’t mount ExFat drives anymore. Any hints will be appreciated. Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
@coloboxp It depend on your hardware. Only recomputer Super series and Robotic series support the 6.2.1 update. |
Beta Was this translation helpful? Give feedback.
-
|
Is mine a "super" series? It's the reComputer J4012 It just arrived today, I hope this 1000€ thing is not already obsolete |
Beta Was this translation helpful? Give feedback.
-
|
I see, it is not the super, so now because of bad design, it won't get any update beyond jetpack 6.1? What are the plans to actually let it happen? Perhaps limiting the super mode....? |
Beta Was this translation helpful? Give feedback.
-
|
Hi @coloboxp , thanks for your feedback! We don’t have a guide for this case right now, but you can reach out to [email protected] — they’ll be able to give you quicker and more detailed help. |
Beta Was this translation helpful? Give feedback.
-
TBH I know that was going to be a dead end. At the end what I did is to flash Jetpack 6.2.1 on the reComputer J4012 (base) with the nVidia's SDK manager 2.3, nothing special needed, worked straightforward. |
Beta Was this translation helpful? Give feedback.
-
|
exfat doesn't work with your image/kernel. Can you please fix that according to: I am not sure how can I do that with your image. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your feedback! Regarding the exFAT support issue you mentioned, I recommend reaching out to our technical support team at [email protected] and providing details such as your device model, the system version you flashed, and the logs from your operation. This will help them provide you with faster and more detailed guidance. |
Beta Was this translation helpful? Give feedback.
-
|
The shasums on the wiki are wrong.. The 4G and 8G checksums are swapped. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, thanks for your update. The problem do exists and sorry for the confusion that the page brought to you. I believe this is caused by a swap of verification log on Wiki page and we would fix that as soon as possible. |
Beta Was this translation helpful? Give feedback.
-
|
I'm trying to flash jetpack 6.2 on J401 Orin 8gb and I keep getting this Entry added by NVIDIA initrd flash tool/home/pabreu/Desktop/mfi_recomputer-orin-j401/tools/kernel_flash/tmp 127.0.0.1(rw,nohide,insecure,no_subtree_check,async,no_root_squash) Entry added by NVIDIA initrd flash tool/home/pabreu/Desktop/mfi_recomputer-orin-j401/tools/kernel_flash/tmp 127.0.0.1(rw,nohide,insecure,no_subtree_check,async,no_root_squash)
Create flash environment 0
/home/pabreu/Desktop/mfi_recomputer-orin-j401/temp_initrdflash/bootloader0 /home/pabreu/Desktop/mfi_recomputer-orin-j401 Entering RCM boot [ 0.0183 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from --mb1_bin I've tried several USB cables (and ive removed the recovery mode jumper after confirming with lsusb), nothing seems to work |
Beta Was this translation helpful? Give feedback.
-
|
never mind, I was flashing the wrong image... There is no jetpack 6.2 for orin nx 16gb (yet) |
Beta Was this translation helpful? Give feedback.
-
|
Then, which jetpack have you installed? Mine is the same board with 8GB. |
Beta Was this translation helpful? Give feedback.
-
|
Hey guys, I'm trying to flash a J501 board (to the nvme) carrying a 3702-0002 AGX Orin module. I've tried following these instructions and got stuck at the USB timeout errors - immediately after entering 'sudo ./tools/kernel_flash/l4t_initrd_flash.sh --flash-only --massflash 1 --network usb0 --showlogs'. I tried 3 different Ubuntu machines and all types of usb C cables and ports without success (getting thought the USB timeout error). After several AI sessions, I now know that the issue is that the Seeed reserver J501 board image package does not have a configuration for the 3702-0002 module. I then downloaded the nvidia packages (sample root and BSP for their carrier board) and noticed that they had a configuration for 3702-0002 and 3702-0000. AI has told me that 0002 and 0000 are treated the same (not sure if this is correct). So i have tried several custom (reServer drivers with flash.sh) attempts without success. It usually runs the L4T BSP method and errors out at: 'sed: couldn't edit /mfi_reserver-agx-orin-64g-j501-6.2-36.4.3-2025-04-02/mfi_reserver-agx-orin-j501x/bootloader/: not a regular file'. Then it throws me to the tegraflash~> shell, but it gives me a 'Error: Command line bootloader is not specified' once I try to run the 'flash' command. I can flash the module with the standard nvidia process but I am unable to view anything on the hdmi port, so I cant interact with it to load the correct drivers. I can provide any commands that would help you, just let me know. I just don't know which ones to provide. My nvme is a Samsung 990 pro 2tb. I have two of there modules (3702-0002) and they both provide the same outputs. Please Help, Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, did you flash the J501 via a local Ubuntu PC or virtual machine? You know, the USB timeout error is likely to raise from flashing with virtual machine. If so, please install a Ubuntu22.04 locally on your PC and try again. Also, we do have configuration for 3702-0000 and 3702-0002 (AGX Orin 64GB/32GB) so please make sure you downloaded to correct version of system image. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @ReKST-117 I have tried several methods. Hopefully this report I put together with the help of my AI will aid in troubleshooting this mess. #---------------------------------------------------------------------------------------------------------------------------------- Device Information
Problem SummaryUnable to successfully flash Jetson AGX Orin using multiple methods and JetPack versions. Different methods produce different errors, but none result in a fully functional system. Attempted Solutions & Results1. L4T InitRD Flash MethodCommand Used: sudo ./tools/kernel_flash/l4t_initrd_flash.sh --flash-only --massflash 1 --network usb0 --showlogsFull Log Output: Versions Tested:
2. Standard Tegra Flash MethodCommand Used: flash.shResult:
3. SDK Manager MethodJetPack 6.1 & 6.2JetPack 6.1 & 6.2Full SDK Manager Log Output: Final Error: Device Detection: SDK Manager correctly identifies device as "Jetson AGX Orin 64GB" JetPack 5.1.5Result:
Technical DetailsUSB Communication IssueThe L4T method appears to fail when transferring the large blob file (74,523,673 bytes) via USB, resulting in timeout errors during the Board Detection MismatchWhile hardware is detected as standard Jetson AGX Orin 64GB, some tools identify it as "holoscan-devkit" which causes configuration conflicts. The EEPROM shows board ID 3701 with SKU 0002, but flash tools attempt to use holoscan-devkit configuration. Blob Generation Details
System Environment
|
Beta Was this translation helpful? Give feedback.
-
|
Here is the summary of my attempts with using nvidias SDKManger while flashing Jetpack5.1.5: JetPack 5.1.5 Flash Results and Boot AnalysisHardware Configuration
Flash Process ResultsSDK Manager SuccessThe SDK Manager completed the flash process successfully: Board Detection During FlashPost-Flash System BehaviorNetwork ConnectivityEthernet Connection (LAN0 port):
Network Service Test Results: $ nmap -sV 192.168.12.42
Host is up (0.013s latency).
All 1000 scanned ports on 192.168.12.42 are closed
$ ssh [email protected]
ssh: connect to host 192.168.12.42 port 22: Connection refused
$ ping 192.168.12.42
PING 192.168.12.42: 56 data bytes
64 bytes from 192.168.12.42: icmp_seq=0 ttl=64 time=0.626 msWireshark Packet Analysis: Serial Console AccessUSB-C Console Discovery:
Boot Log Analysis: Root Cause AnalysisEEPROM Communication FailureThe system consistently fails at the carrier board EEPROM identification stage:
Successful ComponentsBefore the EEPROM failure, all critical components load successfully:
System State Implications
Hardware Compatibility IssueThe failure indicates a fundamental incompatibility between:
Potential Solutions Needed
ConclusionJetPack 5.1.5 flashes successfully but fails to complete boot due to carrier board EEPROM incompatibility. The system achieves partial functionality (networking) but cannot proceed past hardware identification stage, resulting in a locked-down state where services are accessible at the network level but actively refuse application connections. This represents a carrier board support issue requiring either manufacturer-specific software modifications or bootloader configuration changes to accommodate the J501-1's hardware design differences from NVIDIA reference boards. Do you think we can create a hybrid flashing environment with J501-1 specific hardware drivers but utilize the SDKManager method to flashing. Since the initrd method is not allowing us to flash the device? Board Information: |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for sharing all the details! I’d recommend you reach out to our technical support team directly at [email protected]. |
Beta Was this translation helpful? Give feedback.
-
|
J401 Carrier Board doesn't recognize the USB hub connected to the USB-C port I have flashed the latest Jetpack 6.2 using the instructions from this wiki, but my system does not recognize my hub at all. In contrast, I have another official development board from Nvidia with Jetpack 6.1 installed, which does recognize the hub. Can you please provide a solution? I need to use the hub to extend an Ethernet port to support my multiple sensors. Platform: J401 Carrier Board |
Beta Was this translation helpful? Give feedback.
-
|
Hello, we recommend contacting our technical support team at [email protected] and providing detailed information about the issue (for example, the devices used, flashing logs, etc.). They will be able to offer you faster and more detailed guidance. |
Beta Was this translation helpful? Give feedback.
-
|
Jetpack Orin NX 16GB (recomputer j4021) ordered from Mouser. Host computer is Ubuntu 24.04 LTS Gives me this output: |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
I am trying to flash the Orin NX 8GB with version 6.2, but it keeps failing. I have tried many times, but the same issue occurs. Is there something wrong with version 6.2 with orin nx? |
Beta Was this translation helpful? Give feedback.
-
|
I was able to do it successfully, that too using VMware Workstation Pro, and it's working fine for now. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, to help us locate the issue more efficiently, please contact our technical support team at [email protected] and provide your device model, flashing logs, and any relevant details. Our engineers will assist you as soon as possible. In addition, we recommend using a physical machine (Ubuntu 20.04 / 22.04) as the host environment for flashing. |
Beta Was this translation helpful? Give feedback.
-
|
First of all, why the hell do you use sharepoint/one drive for storage? The
jetpack archives are nearly 15GB size, and there are restrictions of
archive files size people can download.. So 99 out of 100 times I try
download the JetPack archive, it fails.Tried this under linux, under
windows 10, with firefox, chrome and curl...
Aside this with ubuntu 22.04 on real host (ubuntu live cd) installation of
JetPack 6.2 was successful. With virtualbox and same ubuntu installation
image i couldn't manage to install it.
…On Mon, 13 Oct 2025 at 13:13, 008 ***@***.***> wrote:
Hi,
1.Please do not use an Ubuntu 24.04 host machine, as JetPack 6.x versions
only support Ubuntu 20.04 and 22.04.
2.When flashing the device, please verify the SHA value to ensure no files
are missing or corrupted.
3.Make sure the device is in recovery mode. The loop prompt "Waiting for
target to boot-up" in the logs indicates that the device may not have
entered the expected boot mode.
4.Please strictly follow the steps in our wiki, execute them one by one,
and check all the items mentioned above.
https://wiki.seeedstudio.com/reComputer_J4012_Flash_Jetpack/
—
Reply to this email directly, view it on GitHub
<#1361 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGJJEFQKHCMDSYDSK57KWL33XN3LHAVCNFSM6AAAAABKMQXH4SVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTINRWGQYTGMA>
.
You are receiving this because you commented.Message ID:
<Seeed-Studio/wiki-documents/repo-discussions/1361/comments/14664130@
github.com>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
I managed to flash it with live cd. But the download failure was not
because network issue, but the platform you are using.
На пн, 27.10.2025 г., 09:42 ч. 008 ***@***.***> написа:
… Hi,
we apologize for the inconvenience.
1.We recommend switching to a more stable network to download the image
file. Currently, we have not encountered any download failures in our
network environment.
2.We do not recommend using a virtual machine for firmware flashing.
During the flashing process, the device will restart, and you will need to
reconnect the device to the virtual machine platform promptly. If the
reconnection is delayed, a flashing error may occur—this is the reason we
recommend using a physical Ubuntu host for firmware flashing.
—
Reply to this email directly, view it on GitHub
<#1361 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGJJEFUWDSGWUDAYVI7OX4T3ZXEH5AVCNFSM6AAAAABKMQXH4SVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTINZZGAZDINQ>
.
You are receiving this because you commented.Message ID:
<Seeed-Studio/wiki-documents/repo-discussions/1361/comments/14790246@
github.com>
|
Beta Was this translation helpful? Give feedback.
and others
Uh oh!
There was an error while loading. Please reload this page.
-
Flash Jetpack | Seeed Studio Wiki
Flash JetPack to reComputer J4012 (J401 carrier board)
https://wiki.seeedstudio.com/reComputer_J4012_Flash_Jetpack/
Beta Was this translation helpful? Give feedback.
All reactions