Quick Start | Seeed Studio Wiki

[giscus[bot]]

Quick Start | Seeed Studio Wiki

Quick Start For Model Assistant

https://wiki.seeedstudio.com/ModelAssistant_Introduce_Quick_Start/

[stevegulick]

I tried some of the Colab yolo detection examples. Unfortunately, In the first cell where it tries to clone Model Assistant, it fails not being able to find torch==2.0.0. How can that be fixed?

ERROR: Could not find a version that satisfies the requirement torch==2.0.0 (from versions: 2.2.0, 2.2.1, 2.2.2, 2.3.0, 2.3.1, 2.4.0, 2.4.1, 2.5.0, 2.5.1, 2.6.0, 2.7.0, 2.7.1, 2.8.0)
ERROR: No matching distribution found for torch==2.0.0

[ReKST-117]

Hi, the reason for the problem is python version of colab is updated. Now the problem is fixed. Please try it again.

[stevegulick]

Hi thanks! but there is another problem when I try to run the first cell. Please see below.

[nfs0619]

@stevegulick Hi, we are working on investigating and fixing this issue. It may take some time. Thank you for your patience.

[stevegulick]

Hi , Thanks. but not the output on running the first cell is... update-alternatives: using /usr/bin/python3.10 to provide /usr/bin/python3 (python3) in manual mode Cloning into 'ethos-u-vela'... remote: Counting objects: 80, done remote: Finding sources: 100% (10824/10824) remote: Total 10824 (delta 6916), reused 9357 (delta 6916) Receiving objects: 100% (10824/10824), 5.76 MiB | 4.93 MiB/s, done. Resolving deltas: 100% (6916/6916), done. /content/ethos-u-vela Traceback (most recent call last): File "/usr/local/bin/pip3", line 4, in <module> from pip._internal.cli.main import main ModuleNotFoundError: No module named 'pip' /content Cloning into 'ModelAssistant'... remote: Enumerating objects: 15743, done. remote: Counting objects: 100% (24/24), done. remote: Compressing objects: 100% (22/22), done. remote: Total 15743 (delta 2), reused 17 (delta 2), pack-reused 15719 (from 1) Receiving objects: 100% (15743/15743), 26.59 MiB | 16.16 MiB/s, done. Resolving deltas: 100% (9177/9177), done. /content/ModelAssistant Checking if CUDA available... OK Traceback (most recent call last): File "/usr/local/bin/pip3", line 4, in <module> from pip._internal.cli.main import main ModuleNotFoundError: No module named 'pip' Installing base deps... Traceback (most recent call last): File "/usr/local/bin/pip3", line 4, in <module> from pip._internal.cli.main import main ModuleNotFoundError: No module named 'pip' Install base deps failed... Exiting

…

On Thu, Sep 25, 2025 at 10:03 PM ReKST-117 ***@***.***> wrote: Hi, the reason for the problem is python version of colab is updated. Now the problem is fixed. Please try it again. — Reply to this email directly, view it on GitHub <#3148 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAVGKZ6YOOYZN4LODPA5Y633USNG7AVCNFSM6AAAAACHNXYZTGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTINJRGY4TENI> . You are receiving this because you commented.Message ID: <Seeed-Studio/wiki-documents/repo-discussions/3148/comments/14516925@ github.com>

[bcetisli]

Hi, we are developing a smart water meter. It has RFM95 lora kit. Is it possible to add as device to SenseCap with any DEVEUI?

[dentedghost]

Hi, I was setting up my first the M2 on the Channel Plan for the Region US902-928, then noticed the Frequency Plan only provides FSB2. I’m used to access to all frequencies on other LoRawan gateways. Is there a way to configure other Frequency Plans for US?

[dentedghost]

After I rebooted, I can now see all 8 different Frequency ranges.