Use VGROVE_ENABLE_ON/OFF

Author: matsujirushi

examples/application/soracom-gps-tracker/MeasureTask.cpp

@@ -28,7 +28,7 @@ void MeasureTaskFunction(void* param) {
   while (true) {
     // Power on the grove module
     Serial.println(TASK_NAME "Power on the grove module");
-    digitalWrite(PIN_VGROVE_ENABLE, LOW);
+    digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
     delay(2 + 2);
     GpsBegin();
 
@@ -52,7 +52,7 @@ void MeasureTaskFunction(void* param) {
     // Power off the grove module
     Serial.println(TASK_NAME "Power off the grove module");
     GpsEnd();
-    digitalWrite(PIN_VGROVE_ENABLE, HIGH);
+    digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_OFF);
     delay(2 + 2);
 
     if (measureResult) {

examples/grove/grove-accelerometer/grove-accelerometer.ino

@@ -26,7 +26,7 @@ void setup(void) {
   Serial.println();
 
   WioCellular.begin();
-  digitalWrite(PIN_VGROVE_ENABLE, LOW);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
   delay(2 + 2);
 
   AccelInitialize();

examples/grove/grove-button/grove-button.ino

@@ -22,7 +22,7 @@ void setup(void) {
   Serial.println();
 
   WioCellular.begin();
-  digitalWrite(PIN_VGROVE_ENABLE, LOW);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
   delay(2 + 2);
 
   pinMode(BUTTON_PIN, INPUT);

examples/grove/grove-buzzer/grove-buzzer.ino

@@ -23,7 +23,7 @@ void setup(void) {
   Serial.println();
 
   WioCellular.begin();
-  digitalWrite(PIN_VGROVE_ENABLE, LOW);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
   delay(2 + 2);
 
   digitalWrite(BUZZER_PIN, LOW);

examples/grove/grove-gps/grove-gps.ino

@@ -19,7 +19,7 @@ void setup(void) {
   Serial.println();
 
   WioCellular.begin();
-  digitalWrite(PIN_VGROVE_ENABLE, LOW);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
   delay(2 + 2);
 
   GpsBegin();

examples/grove/grove-rotary-angle-sensor/grove-rotary-angle-sensor.ino

@@ -23,7 +23,7 @@ void setup(void) {
   Serial.println();
 
   WioCellular.begin();
-  digitalWrite(PIN_VGROVE_ENABLE, LOW);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
   delay(2 + 2);
 
   analogReadResolution(14);

examples/grove/grove-ultrasonic-ranger/grove-ultrasonic-ranger.ino

@@ -29,7 +29,7 @@ void setup(void) {
   Serial.println();
 
   WioCellular.begin();
-  digitalWrite(PIN_VGROVE_ENABLE, LOW);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
   delay(2 + 2);
 }
 

extras/tools/inspection/inspection.ino

@@ -56,7 +56,7 @@ void setup(void) {
   Serial.println();
 
   Serial.print("Enable Grove ... ");
-  digitalWrite(PIN_VGROVE_ENABLE, LOW);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON);
   Serial.println("OK");
 
   Serial.println("Wait for USER button");
@@ -68,7 +68,7 @@ void setup(void) {
   }
 
   Serial.print("Disable Grove ... ");
-  digitalWrite(PIN_VGROVE_ENABLE, HIGH);
+  digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_OFF);
   Serial.println("OK");
 
   Serial.println("Wait for USER button");

src/board/WioBg770a.hpp

@@ -86,7 +86,7 @@ namespace wiocellular
              *
              * Groveの電源を投入します。
              */
-            [[deprecated("Use digitalWrite(PIN_VGROVE_ENABLE, LOW) instead.")]]
+            [[deprecated("Use digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_ON) instead.")]]
             void enableGrovePower(void)
             {
                 VgroveEnable_.write(0);
@@ -99,7 +99,7 @@ namespace wiocellular
              *
              * Groveの電源を開放します。
              */
-            [[deprecated("Use digitalWrite(PIN_VGROVE_ENABLE, HIGH) instead.")]]
+            [[deprecated("Use digitalWrite(PIN_VGROVE_ENABLE, VGROVE_ENABLE_OFF) instead.")]]
             void disableGrovePower(void)
             {
                 VgroveEnable_.write(1);