Skip to content

ark_fpv.md

Latest commit

 

History

History
90 lines (68 loc) · 2.3 KB

ark_fpv.md

File metadata and controls

90 lines (68 loc) · 2.3 KB

ARK FPV Flight Controller

:::warning PX4 does not manufacture this (or any) autopilot. Contact the manufacturer for hardware support or compliance issues. :::

The USA-built ARK FPV flight controller is based on the ARKV6X in a 30.5mm standard mounting pattern, supporting a 3-12s battery input with a regulated 12V 2A output for video transmitters and payloads.

ARK FPV Main Photo

:::info This flight controller is manufacturer supported. :::

Where To Buy

Order from Ark Electronics (US)

Documentation

See the documentation Ark Electronics GitBook

Sensors

Microprocessor

Connectors

  • USB C
    • VBUS In, USB
  • PWM
    • VBAT In, Analog Current Input, Telem RX, 4x PWM
    • JST-GH 8 Pin
  • PWM EXTRA
    • 5x PWM
    • JST-SH 6 Pin
  • RC INPUT
    • 5V Out, UART
    • JST-GH 4 Pin
  • POWER AUX
    • 12V Out, VBAT In/Out
    • JST-GH 3 Pin
  • TELEM
    • 5V Out, UART with flow control
    • JST-GH 6 Pin
  • GPS
    • 5V Out, UART, I2C
    • JST-GH 6 Pin
  • CAN
    • 5V Out, CAN
    • JST-GH 4 Pin
  • VTX
    • 12V Out, UART TX/RX, UART RX
    • JST-GH 6 Pin
  • SPI (OSD or External IMU)
    • 5V Out, SPI
    • JST-SH 8 Pin
  • DEBUG
    • 3.3V Out, UART, SWD
    • JST-SH 6 Pin

Power Requirements

  • 5.5V - 54V
  • 500 mA (300 mA main system, 200 mA heater)

Additional Information

  • Weight: 7.5 g g with MicroSD card
  • Dimensions: 3.6 x 3.6 x 0.8 cm
  • USA Built - NDAA compliant
  • Heater: 1W for warming sensors in extreme cold
  • LED Indicators
  • MicroSD Slot

Pinout

See the DS-10 Pixhawk Autopilot Bus Standard