Luacheck

Matter Switch: Add StatelessStep capability support for SwitchLevel and ColorTemperature #6498

Triggered via pull request January 20, 2026 22:00

hcarter-775

synchronize #2677

feature/statelessStep

Status Success

Total duration 28s

Artifacts –

luacheck.yml

on: pull_request

luacheck

24s

Annotations

159 errors and 3 notices

2 out of 7 runs with error: Handle received BatPercentRemaining from device.: /#L0

tests/matter-switch_test_output.xml

1 out of 7 runs with error: Battery percent reports should generate correct messages: /#L0

tests/matter-switch_test_output.xml

1 out of 7 runs with error: Relative humidity reports should generate correct messages: /#L0

tests/matter-switch_test_output.xml

1 out of 7 runs with error: Temperature reports should generate correct messages: /#L0

tests/matter-switch_test_output.xml

1 out of 3 runs with error: Min and max temperature attributes set capability constraint: /#L0

tests/matter-switch_test_output.xml

All 5 runs with error: On command should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

All 5 runs with error: Off command should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Active power measurement should generate correct messages: /#L0

tests/matter-switch_test_output.xml

All 3 runs with error: Cumulative Energy measurement should generate correct messages: /#L0

tests/matter-switch_test_output.xml

Periodic Energy as subordinate to Cumulative Energy measurement should not generate any messages with error: /#L0

tests/matter-switch_test_output.xml

Periodic Energy measurement should generate correct messages with error: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Test profile change on init for Electrical Sensor device type: /#L0

tests/matter-switch_test_output.xml

Test profile change on init for only Periodic Electrical Sensor device type with error: /#L0

tests/matter-switch_test_output.xml

Test resetEnergyMeter command on parent and child for CumulativeEnergyImported with error: /#L0

tests/matter-switch_test_output.xml

Test resetEnergyMeter command on device for PeriodicEnergyImported with error: /#L0

tests/matter-switch_test_output.xml

All 6 runs with error: Set level command should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

Test that Color Temperature Light device does not switch profiles with error: /#L0

tests/matter-switch_test_output.xml

Test that Extended Color Light device does not switch profiles with error: /#L0

tests/matter-switch_test_output.xml

All 5 runs with error: Current level reports should generate appropriate events: /#L0

tests/matter-switch_test_output.xml

All 3 runs with error: Set color command should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Set color command should send huesat commands when supported: /#L0

tests/matter-switch_test_output.xml

Set color command should clamp invalid huesat values with error: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Set Hue command should send MoveToHue: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Set Saturation command should send MoveToSaturation: /#L0

tests/matter-switch_test_output.xml

All 5 runs with error: Set color temperature should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

All 4 runs with error: X and Y color values should report hue and saturation once both have been received: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: X and Y color values have 0 value: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Y and X color values should report hue and saturation once both have been received: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Do not report when receiving a color temperature of 0 mireds: /#L0

tests/matter-switch_test_output.xml

Min and max color temperature attributes set capability constraint with error: /#L0

tests/matter-switch_test_output.xml

Min and max color temperature attributes set capability constraint using improved temperature conversion rounding with error: /#L0

tests/matter-switch_test_output.xml

Device reports mireds outside of supported range, set capability to min/max value in kelvin with error: /#L0

tests/matter-switch_test_output.xml

Capability sets color temp outside of supported range, value sent to device is limited to min/max value in mireds with error: /#L0

tests/matter-switch_test_output.xml

Min color temperature outside of range, capability not sent with error: /#L0

tests/matter-switch_test_output.xml

Max color temperature outside of range, capability not sent with error: /#L0

tests/matter-switch_test_output.xml

Min and max level attributes set capability constraint with error: /#L0

tests/matter-switch_test_output.xml

Min level attribute outside of range for lighting feature device (min level = 1), capability not sent with error: /#L0

tests/matter-switch_test_output.xml

colorControl capability sent based on CurrentHue and CurrentSaturation due to ColorMode with error: /#L0

tests/matter-switch_test_output.xml

colorControl capability sent based on CurrentX and CurrentY due to ColorMode with error: /#L0

tests/matter-switch_test_output.xml

Reports mapping to EnabledState capability data type should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Night Vision reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Image Rotation reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Two Way Talk Support reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Muted reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Volume Level reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Status Light Enabled reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Status Light Brightness reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Rate Distortion Trade Off Points, MaxEncodedPixelRate, VideoSensorParams reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Rate Distortion Trade Off Points, VideoSensorParams, MaxEncodedPixelRate reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

MaxEncodedPixelRate, VideoSensorParams, Rate Distortion Trade Off Points reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

PTZ Position reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

PTZ Presets reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Max Presets reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Max Zones reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Zones reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Triggers reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Sensitivity reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Chime reports should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Zone events should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Button events should generate appropriate events with error: /#L0

tests/matter-switch_test_output.xml

Set night vision commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set enabled commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set image rotation command should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set mute commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set Volume command should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set Mode command should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set Status LED commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set Relative PTZ commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Set PTZ commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Preset commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Sound commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Zone Management zone commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Zone Management zone commands should send the appropriate commands - missing optional color argument with error: /#L0

tests/matter-switch_test_output.xml

Zone Management trigger commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Stream management commands should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Stream management setStream command should modify an existing stream with error: /#L0

tests/matter-switch_test_output.xml

Camera profile should not update for an unchanged Status Light AttributeList report with error: /#L0

tests/matter-switch_test_output.xml

Camera profile should update for a changed Status Light AttributeList report with error: /#L0

tests/matter-switch_test_output.xml

Handle single press sequence when changing the device_lifecycle with error: /#L0

tests/matter-switch_test_output.xml

Handle single press sequence in case of exhausted endpoint with error: /#L0

tests/matter-switch_test_output.xml

Color Temperature Step Command Test with error: /#L0

tests/matter-switch_test_output.xml

Level Step Command Test with error: /#L0

tests/matter-switch_test_output.xml

Ensure Ikea Scroll Button initialization works as expected with error: /#L0

tests/matter-switch_test_output.xml

3 out of 7 runs with error: Handle single press sequence, no hold: /#L0

tests/matter-switch_test_output.xml

2 out of 3 runs with error: Handle single press sequence for short release-supported button: /#L0

tests/matter-switch_test_output.xml

3 out of 4 runs with error: Handle single press sequence for emulated hold on short-release-only button: /#L0

tests/matter-switch_test_output.xml

3 out of 4 runs with error: Handle single press sequence for a long hold on long-release-capable button: /#L0

tests/matter-switch_test_output.xml

3 out of 4 runs with error: Handle single press sequence for a long hold on multi button: /#L0

tests/matter-switch_test_output.xml

3 out of 4 runs with error: Handle single press sequence for a multi press on multi button: /#L0

tests/matter-switch_test_output.xml

3 out of 4 runs with error: Handle long press sequence for a long hold on long-release-capable button: /#L0

tests/matter-switch_test_output.xml

3 out of 4 runs with error: Handle long press sequence for a long hold on multi button: /#L0

tests/matter-switch_test_output.xml

3 out of 6 runs with error: Handle single press sequence, with hold: /#L0

tests/matter-switch_test_output.xml

3 out of 6 runs with error: Handle release after short press: /#L0

tests/matter-switch_test_output.xml

3 out of 7 runs with error: Handle release after long press: /#L0

tests/matter-switch_test_output.xml

6 out of 9 runs with error: Receiving a max press attribute of 2 should emit correct event: /#L0

tests/matter-switch_test_output.xml

5 out of 8 runs with error: Receiving a max press attribute of 3 should emit correct event: /#L0

tests/matter-switch_test_output.xml

3 out of 6 runs with error: Receiving a max press attribute of greater than 6 should only emit up to pushed_6x: /#L0

tests/matter-switch_test_output.xml

4 out of 8 runs with error: Handle double press: /#L0

tests/matter-switch_test_output.xml

3 out of 6 runs with error: Handle multi press for 4 times: /#L0

tests/matter-switch_test_output.xml

2 out of 3 runs with error: Handle a long press including MultiPressComplete: /#L0

tests/matter-switch_test_output.xml

2 out of 3 runs with error: Handle long press followed by single press: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Parent device: switch capability should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: First child device: switch capability switch should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Second child device: switch capability should send the appropriate commands: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Min and max level attributes set capability constraint for child devices: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Min and max color temp attributes set capability constraint for child devices: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Test child devices are created in order of their endpoints: /#L0

tests/matter-switch_test_output.xml

Button/Switch device : button/switch capability should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Check Energy/Power Management and powerConsumptionReport with error: /#L0

tests/matter-switch_test_output.xml

All 2 runs with error: Test info changed event with matter_version update: /#L0

tests/matter-switch_test_output.xml

On command to component switch should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

On command to main component should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

On command to component switch should send the appropriate commands for devices with non-sequential endpoints with error: /#L0

tests/matter-switch_test_output.xml

Handle single press sequence with error: /#L0

tests/matter-switch_test_output.xml

Test profile change to button-battery when battery percent remaining attribute (attribute ID 12) is available with error: /#L0

tests/matter-switch_test_output.xml

Test profile does not change to button-battery when battery percent remaining attribute (attribute ID 12) is not available with error: /#L0

tests/matter-switch_test_output.xml

2 out of 3 runs with error: Occupancy reports should generate correct messages: /#L0

tests/matter-switch_test_output.xml

1 out of 2 runs with error: Illuminance reports should generate correct messages: /#L0

tests/matter-switch_test_output.xml

Open command should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Close command should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

All 3 runs with error: Current state reports should generate appropriate events: /#L0

tests/matter-switch_test_output.xml

Main switch component: switch capability should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

First button component: Handle single press sequence, no hold with error: /#L0

tests/matter-switch_test_output.xml

Second button component: Handle single press sequence for short release-supported button with error: /#L0

tests/matter-switch_test_output.xml

Third button component: Handle single press sequence for a long hold on long-release-capable button with error: /#L0

tests/matter-switch_test_output.xml

Switch child device: Set color temperature should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Test MCD configuration not including switch for unsupported switch device type, create child device instead with error: /#L0

tests/matter-switch_test_output.xml

Test driver switched event with error: /#L0

tests/matter-switch_test_output.xml

Test info changed event with parent device profile update with error: /#L0

tests/matter-switch_test_output.xml

Test child device initialization, and that subscriptions are initialized correctly with error: /#L0

tests/matter-switch_test_output.xml

Test profile change on init for onoff parent cluster as server with error: /#L0

tests/matter-switch_test_output.xml

Test profile change on init for dimmer parent cluster as server with error: /#L0

tests/matter-switch_test_output.xml

Test profile change on init for color dimmer parent cluster as server with error: /#L0

tests/matter-switch_test_output.xml

Test init for onoff parent cluster as client with error: /#L0

tests/matter-switch_test_output.xml

Test init for device with requiring the switch category as a vendor override with error: /#L0

tests/matter-switch_test_output.xml

Test init for mounted onoff control parent cluster as server with error: /#L0

tests/matter-switch_test_output.xml

Test init for mounted dimmable load control parent cluster as server with error: /#L0

tests/matter-switch_test_output.xml

Test profile change on init for water valve parent cluster as server with error: /#L0

tests/matter-switch_test_output.xml

Test profile change on init for onoff parent cluster as client and onoff child as server with error: /#L0

tests/matter-switch_test_output.xml

Test profile change on init for onoff device when parent and child are both server with error: /#L0

tests/matter-switch_test_output.xml

Test child device attribute subscriptions when parent device has clusters that are not a superset of child device clusters with error: /#L0

tests/matter-switch_test_output.xml

Test child device attributes not subscribed to for unsupported device type for child device with error: /#L0

tests/matter-switch_test_output.xml

Test init for light with motion sensor with error: /#L0

tests/matter-switch_test_output.xml

Switch capability should send the appropriate commands with error: /#L0

tests/matter-switch_test_output.xml

Fan mode reports should generate correct messages with error: /#L0

tests/matter-switch_test_output.xml

Fan mode sequence reports should generate the appropriate supported modes with error: /#L0

tests/matter-switch_test_output.xml

Capability command setFanMode should be handled with error: /#L0

tests/matter-switch_test_output.xml

Capability command setPercent should be handled with error: /#L0

tests/matter-switch_test_output.xml

Check the power and energy meter when the device is added with error: /#L0

tests/matter-switch_test_output.xml

Check when the device is removed with error: /#L0

tests/matter-switch_test_output.xml

Check that the timer created in create_poll_schedule properly reads the device in requestData with error: /#L0

tests/matter-switch_test_output.xml

Check the refresh command with error: /#L0

tests/matter-switch_test_output.xml

Report with the custom Watt attribute with error: /#L0

tests/matter-switch_test_output.xml

Report with the custom Watt accumulated attribute with error: /#L0

tests/matter-switch_test_output.xml

Report with the custom Watt accumulated attribute after 10 minutes with error: /#L0

tests/matter-switch_test_output.xml

Check the reset command with error: /#L0

tests/matter-switch_test_output.xml

Test the on attribute with error: /#L0

tests/matter-switch_test_output.xml

Report with power consumption after 15 minutes even when device is off with error: /#L0

tests/matter-switch_test_output.xml

Profile should not change for devices with aggregator device type (bridges) with error: /#L0

tests/matter-switch_test_output.xml

2490 tests found (test 1 to 1010)

There are 2490 tests, see "Raw output" for the list of tests 1 to 1010.

2490 tests found (test 1011 to 1944)

There are 2490 tests, see "Raw output" for the list of tests 1011 to 1944.

2490 tests found (test 1945 to 2490)

There are 2490 tests, see "Raw output" for the list of tests 1945 to 2490.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Matter Switch: Add StatelessStep capability support for SwitchLevel and ColorTemperature #6498

Summary